[Intel-gfx] [PATCH 04/10] drm/i915/chv: Added CHV specific register read and write

Deepak S deepak.s at linux.intel.com
Mon May 5 07:55:52 CEST 2014


Thanks Ben. Apologies for delayed response.

I am incorporating the review comment changes next set of patch review.


On Saturday 26 April 2014 03:24 AM, Ben Widawsky wrote:
> On Mon, Apr 21, 2014 at 01:34:08PM +0530, deepak.s at linux.intel.com wrote:
>> From: Deepak S <deepak.s at linux.intel.com>
>>
>> Support to individually control Media/Render well based on the register access.
>> Add CHV specific write function to habdle difference between registers
>> that are sadowed vs those that need forcewake even for writes.
>>
>> v2: Drop write FIFO for CHV and add comman well forcewake (Ville)
>>
>> v3: Fix for decrementing fw count in chv read/write. (Deepak)
>>
>> Signed-off-by: Deepak S <deepak.s at linux.intel.com>
>> [vsyrjala: Move the register range macros into intel_uncore.c]
>> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> I left some comments on the first sending of this patch, and it's not
> clear if you ignored them intentionally or not. Inquiring minds would
> like to know.
>
> I'll repeat some of the ones I feel are more important below.
>
>> ---
>>   drivers/gpu/drm/i915/intel_uncore.c | 139 +++++++++++++++++++++++++++++++++---
>>   1 file changed, 131 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
>> index 2a72bab..11741e4 100644
>> --- a/drivers/gpu/drm/i915/intel_uncore.c
>> +++ b/drivers/gpu/drm/i915/intel_uncore.c
>> @@ -495,6 +495,31 @@ void assert_force_wake_inactive(struct drm_i915_private *dev_priv)
>>   	((reg) >= 0x22000 && (reg) < 0x24000) ||\
>>   	((reg) >= 0x30000 && (reg) < 0x40000))
>>   
>> +#define FORCEWAKE_CHV_RENDER_RANGE_OFFSET(reg) \
>> +	(((reg) >= 0x2000 && (reg) < 0x4000) ||\
>> +	((reg) >= 0x5000 && (reg) < 0x8000) ||\
>> +	((reg) >= 0x8300 && (reg) < 0x8500) ||\
>> +	((reg) >= 0xB000 && (reg) < 0xC000) ||\
>> +	((reg) >= 0xE000 && (reg) < 0xE800))
>> +
>> +#define FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(reg)\
>> +	(((reg) >= 0x8800 && (reg) < 0x8900) ||\
>> +	((reg) >= 0xD000 && (reg) < 0xD800) ||\
>> +	((reg) >= 0x12000 && (reg) < 0x14000) ||\
>> +	((reg) >= 0x1A000 && (reg) < 0x1C000) ||\
>> +	((reg) >= 0x1E800 && (reg) < 0x1EA00) ||\
>> +	((reg) >= 0x30000 && (reg) < 0x40000))
>> +
>> +#define FORCEWAKE_CHV_COMMON_RANGE_OFFSET(reg)\
>> +	(((reg) >= 0x4000 && (reg) < 0x5000) ||\
>> +	((reg) >= 0x8000 && (reg) < 0x8300) ||\
>> +	((reg) >= 0x8500 && (reg) < 0x8600) ||\
>> +	((reg) >= 0x9000 && (reg) < 0xB000) ||\
>> +	((reg) >= 0xC000 && (reg) < 0xc800) ||\
>> +	((reg) >= 0xF000 && (reg) < 0x10000) ||\
>> +	((reg) >= 0x14000 && (reg) < 0x14400) ||\
>> +	((reg) >= 0x22000 && (reg) < 0x24000))
>> +
>>   static void
>>   ilk_dummy_write(struct drm_i915_private *dev_priv)
>>   {
>> @@ -588,7 +613,48 @@ vlv_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
>>   	REG_READ_FOOTER; \
>>   }
>>   
>> +#define __chv_read(x) \
>> +static u##x \
>> +chv_read##x(struct drm_i915_private *dev_priv, off_t reg, bool trace) { \
>> +	unsigned fwengine = 0; \
>> +	REG_READ_HEADER(x); \
>> +	if (FORCEWAKE_CHV_RENDER_RANGE_OFFSET(reg)) { \
>> +		fwengine = FORCEWAKE_RENDER; \
>> +	} \
>> +	else if (FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(reg)) { \
>> +		fwengine = FORCEWAKE_MEDIA; \
>> +	} \
>> +	else if (FORCEWAKE_CHV_COMMON_RANGE_OFFSET(reg)) { \
>> +		fwengine = FORCEWAKE_ALL; \
>> +	} \
> These don't following linux kernel coding style
>
>> +	if (FORCEWAKE_RENDER & fwengine) { \
>> +		if (dev_priv->uncore.fw_rendercount++ == 0) \
>> +			(dev_priv)->uncore.funcs.force_wake_get(dev_priv, \
>> +								fwengine); \
>> +	} \
>> +	if (FORCEWAKE_MEDIA & fwengine) { \
>> +		if (dev_priv->uncore.fw_mediacount++ == 0) \
>> +			(dev_priv)->uncore.funcs.force_wake_get(dev_priv, \
>> +								fwengine); \
>> +	} \
>> +	val = __raw_i915_read##x(dev_priv, reg); \
>> +	if (FORCEWAKE_RENDER & fwengine) { \
>> +		if (--dev_priv->uncore.fw_rendercount == 0) \
>> +			(dev_priv)->uncore.funcs.force_wake_put(dev_priv, \
>> +								fwengine); \
>> +	} \
>> +	if (FORCEWAKE_MEDIA & fwengine) { \
>> +		if (--dev_priv->uncore.fw_mediacount == 0) \
>> +			(dev_priv)->uncore.funcs.force_wake_put(dev_priv, \
>> +								fwengine); \
>> +	} \
>> +	REG_READ_FOOTER; \
>> +}
> It seems like it makes a lot more sense to pass register offset to
> force_wake_put() and let the logic occur there instead of making a big
> ugly macro. We can cheat and use the existing functions since fw_engine
> was defined as an int, and the register range fits within that.
>
>>   
>> +__chv_read(8)
>> +__chv_read(16)
>> +__chv_read(32)
>> +__chv_read(64)
>>   __vlv_read(8)
>>   __vlv_read(16)
>>   __vlv_read(32)
>> @@ -606,6 +672,7 @@ __gen4_read(16)
>>   __gen4_read(32)
>>   __gen4_read(64)
>>   
>> +#undef __chv_read
>>   #undef __vlv_read
>>   #undef __gen6_read
>>   #undef __gen5_read
>> @@ -710,6 +777,49 @@ gen8_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, bool trace
>>   	REG_WRITE_FOOTER; \
>>   }
>>   
>> +#define __chv_write(x) \
>> +static void \
>> +chv_write##x(struct drm_i915_private *dev_priv, off_t reg, u##x val, bool trace) { \
>> +	unsigned fwengine = 0; \
>> +	bool __needs_put = !is_gen8_shadowed(dev_priv, reg); \
>> +	REG_WRITE_HEADER; \
>> +	if (FORCEWAKE_CHV_RENDER_RANGE_OFFSET(reg)) { \
>> +		fwengine = FORCEWAKE_RENDER; \
>> +	} \
>> +	else if (FORCEWAKE_CHV_MEDIA_RANGE_OFFSET(reg)) { \
>> +		fwengine = FORCEWAKE_MEDIA; \
>> +	} \
>> +	else if (FORCEWAKE_CHV_COMMON_RANGE_OFFSET(reg)) { \
>> +		fwengine = FORCEWAKE_ALL; \
>> +	} \
> coding convention again
>
>> +	if (__needs_put && (FORCEWAKE_RENDER & fwengine)) { \
>> +			if (dev_priv->uncore.fw_rendercount++ == 0) \
>> +				(dev_priv)->uncore.funcs.force_wake_get(dev_priv, \
>> +									fwengine); \
>> +	} \
>> +	if (__needs_put && (FORCEWAKE_MEDIA & fwengine)) { \
>> +		if (dev_priv->uncore.fw_mediacount++ == 0) \
>> +			(dev_priv)->uncore.funcs.force_wake_get(dev_priv, \
>> +								fwengine); \
>> +	} \
>> +	__raw_i915_write##x(dev_priv, reg, val); \
>> +	if (__needs_put && (FORCEWAKE_RENDER & fwengine)) { \
>> +			if (--dev_priv->uncore.fw_rendercount == 0) \
>> +				(dev_priv)->uncore.funcs.force_wake_put(dev_priv, \
>> +									fwengine); \
>> +	} \
>> +	if (__needs_put && (FORCEWAKE_MEDIA & fwengine)) { \
>> +		if (--dev_priv->uncore.fw_mediacount == 0) \
>> +			(dev_priv)->uncore.funcs.force_wake_put(dev_priv, \
>> +								fwengine); \
>> +	} \
> Same comment above
>
>> +	REG_WRITE_FOOTER; \
>> +}
>> +
>> +__chv_write(8)
>> +__chv_write(16)
>> +__chv_write(32)
>> +__chv_write(64)
>>   __gen8_write(8)
>>   __gen8_write(16)
>>   __gen8_write(32)
>> @@ -731,6 +841,7 @@ __gen4_write(16)
>>   __gen4_write(32)
>>   __gen4_write(64)
>>   
>> +#undef __chv_write
>>   #undef __gen8_write
>>   #undef __hsw_write
>>   #undef __gen6_write
>> @@ -794,14 +905,26 @@ void intel_uncore_init(struct drm_device *dev)
>>   
>>   	switch (INTEL_INFO(dev)->gen) {
>>   	default:
>> -		dev_priv->uncore.funcs.mmio_writeb  = gen8_write8;
>> -		dev_priv->uncore.funcs.mmio_writew  = gen8_write16;
>> -		dev_priv->uncore.funcs.mmio_writel  = gen8_write32;
>> -		dev_priv->uncore.funcs.mmio_writeq  = gen8_write64;
>> -		dev_priv->uncore.funcs.mmio_readb  = gen6_read8;
>> -		dev_priv->uncore.funcs.mmio_readw  = gen6_read16;
>> -		dev_priv->uncore.funcs.mmio_readl  = gen6_read32;
>> -		dev_priv->uncore.funcs.mmio_readq  = gen6_read64;
>> +		if (IS_CHERRYVIEW(dev)) {
>> +			dev_priv->uncore.funcs.mmio_writeb  = chv_write8;
>> +			dev_priv->uncore.funcs.mmio_writew  = chv_write16;
>> +			dev_priv->uncore.funcs.mmio_writel  = chv_write32;
>> +			dev_priv->uncore.funcs.mmio_writeq  = chv_write64;
>> +			dev_priv->uncore.funcs.mmio_readb  = chv_read8;
>> +			dev_priv->uncore.funcs.mmio_readw  = chv_read16;
>> +			dev_priv->uncore.funcs.mmio_readl  = chv_read32;
>> +			dev_priv->uncore.funcs.mmio_readq  = chv_read64;
>> +
>> +		} else {
>> +			dev_priv->uncore.funcs.mmio_writeb  = gen8_write8;
>> +			dev_priv->uncore.funcs.mmio_writew  = gen8_write16;
>> +			dev_priv->uncore.funcs.mmio_writel  = gen8_write32;
>> +			dev_priv->uncore.funcs.mmio_writeq  = gen8_write64;
>> +			dev_priv->uncore.funcs.mmio_readb  = gen6_read8;
>> +			dev_priv->uncore.funcs.mmio_readw  = gen6_read16;
>> +			dev_priv->uncore.funcs.mmio_readl  = gen6_read32;
>> +			dev_priv->uncore.funcs.mmio_readq  = gen6_read64;
>> +		}
>>   		break;
>>   	case 7:
>>   	case 6:
> I think if you make CHV have it's own forcewake get/put, then you can
> just use the the same MMIO functions.
>
> Like the previous patch, I am having trouble finding where the register
> ranges exist. Assuming those are correct (and I'm guessing Ville checked
> thoroughly), the patch looks correct.
>
> So I'd prefer to at least explore my suggestions, but it's
> Reviewed-by: Ben Widawsky <ben at bwidawsk.net>
>




More information about the Intel-gfx mailing list