[Intel-gfx] [PATCH 03/10] drm/i915/chv: Enable Render Standby (RC6) for Cherryview

Deepak S deepak.s at linux.intel.com
Wed May 14 17:47:31 CEST 2014


On Friday 09 May 2014 06:49 PM, Mika Kuoppala wrote:
> Hi Deepak,
>
> deepak.s at linux.intel.com writes:
>
>> From: Deepak S <deepak.s at linux.intel.com>
>>
>> v2: Configure PCBR if BIOS fails allocate pcbr (deepak)
>>
>> v3: Fix PCBR condition check during CHV RC6 Enable flag set
>>
>> v4: Fixup PCBR comment msg. (Chris)
>>      Rebase against latest code (Deak)
>>      Fixup Spurious hunk (Ben)
>>
>> Signed-off-by: Deepak S <deepak.s at linux.intel.com>
>> Acked-by: Ben Widawsky <ben at bwidawsk.net>
>> ---
>>   drivers/gpu/drm/i915/i915_reg.h |   2 +
>>   drivers/gpu/drm/i915/intel_pm.c | 115 +++++++++++++++++++++++++++++++++++++---
>>   2 files changed, 111 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> index c850254..b4074fd 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -962,6 +962,8 @@ enum punit_power_well {
>>   #define VLV_IMR		(VLV_DISPLAY_BASE + 0x20a8)
>>   #define VLV_ISR		(VLV_DISPLAY_BASE + 0x20ac)
>>   #define VLV_PCBR	(VLV_DISPLAY_BASE + 0x2120)
>> +#define VLV_PCBR_ADDR_SHIFT	12
>> +
>>   #define   DISPLAY_PLANE_FLIP_PENDING(plane) (1<<(11-(plane))) /* A and B only */
>>   #define EIR		0x020b0
>>   #define EMR		0x020b4
>> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
>> index ebb5c88..f0359b6 100644
>> --- a/drivers/gpu/drm/i915/intel_pm.c
>> +++ b/drivers/gpu/drm/i915/intel_pm.c
>> @@ -3300,6 +3300,13 @@ static void gen6_disable_rps(struct drm_device *dev)
>>   		gen6_disable_rps_interrupts(dev);
>>   }
>>   
>> +static void cherryview_disable_rps(struct drm_device *dev)
>> +{
>> +	struct drm_i915_private *dev_priv = dev->dev_private;
>> +
>> +	I915_WRITE(GEN6_RC_CONTROL, 0);
>> +}
>> +
>>   static void valleyview_disable_rps(struct drm_device *dev)
>>   {
>>   	struct drm_i915_private *dev_priv = dev->dev_private;
>> @@ -3722,6 +3729,33 @@ static void valleyview_check_pctx(struct drm_i915_private *dev_priv)
>>   			     dev_priv->vlv_pctx->stolen->start);
>>   }
>>   
>> +
>> +/* Check that the pcbr address is not empty. */
>> +static void cherryview_check_pctx(struct drm_i915_private *dev_priv)
>> +{
>> +	unsigned long pctx_addr = I915_READ(VLV_PCBR) & ~4095;
>> +
>> +	WARN_ON((pctx_addr >> VLV_PCBR_ADDR_SHIFT) == 0);
>> +}
>> +
>> +static void cherryview_setup_pctx(struct drm_device *dev)
>> +{
>> +	struct drm_i915_private *dev_priv = dev->dev_private;
>> +	unsigned long pctx_paddr;
>> +	struct i915_gtt *gtt = &dev_priv->gtt;
>> +	u32 pcbr;
>> +	int pctx_size = 32*1024;
>> +
>> +	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
>> +
>> +	pcbr = I915_READ(VLV_PCBR);
>> +	if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) {
> I admit that address zero locked by bios is prolly in
> realms of paranoia. But I would still omit shift here to
> get lock bit taken into consideration.

Agreed, But verifying address is more important right? We are more concerned with address than lock bit right?

>> +		pctx_paddr = (dev_priv->mm.stolen_base +
>> +			      (gtt->stolen_size - pctx_size));
>> +		I915_WRITE(VLV_PCBR, pctx_paddr);
> In here tho I would mask the low bits out, just to be on
> the safe side. If we get off by one on stolen calculation we end up
> writing the lock bit.

I will add the mask bit

> I am thinking that we should just sanity check that bios
> has set this up and that it seems to be in correct place. If not, spit a
> warning and leave rc6 disabled.
>
> The BIOS should have setup everything for us. Why do we need this
> PCBR setup?
>
Nice Point, We need to make sure BIOS is setting up the  PCBR properly.


>> +	}
>> +}
>> +
>>   static void valleyview_setup_pctx(struct drm_device *dev)
>>   {
>>   	struct drm_i915_private *dev_priv = dev->dev_private;
>> @@ -3811,11 +3845,72 @@ static void valleyview_init_gt_powersave(struct drm_device *dev)
>>   	mutex_unlock(&dev_priv->rps.hw_lock);
>>   }
>>   
>> +static void cherryview_init_gt_powersave(struct drm_device *dev)
>> +{
>> +	cherryview_setup_pctx(dev);
>> +}
>> +
>>   static void valleyview_cleanup_gt_powersave(struct drm_device *dev)
>>   {
>>   	valleyview_cleanup_pctx(dev);
>>   }
>>   
>> +static void cherryview_enable_rps(struct drm_device *dev)
>> +{
>> +	struct drm_i915_private *dev_priv = dev->dev_private;
>> +	struct intel_ring_buffer *ring;
>> +	u32 gtfifodbg, rc6_mode = 0, pcbr;
>> +	int i;
>> +
>> +	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
>> +
>> +	gtfifodbg = I915_READ(GTFIFODBG);
>> +	if (gtfifodbg) {
>> +		DRM_DEBUG_DRIVER("GT fifo had a previous error %x\n",
>> +				 gtfifodbg);
>> +		I915_WRITE(GTFIFODBG, gtfifodbg);
>> +	}
>> +
>> +	cherryview_check_pctx(dev_priv);
>> +
>> +	/* 1a & 1b: Get forcewake during program sequence. Although the driver
>> +	 * hasn't enabled a state yet where we need forcewake, BIOS may have.*/
>> +	gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
>> +
> I915_WRITE(GEN6_RC_CONTROL, 0);
>
>> +	/* 2a: Program RC6 thresholds.*/
>> +	I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
>> +	I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
>> +	I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); /* 25 * 1280ns */
>> +
>> +	for_each_ring(ring, dev_priv, i)
>> +		I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
>> +
> I915_WRITE(GEN6_RC_SLEEP, 0);
> missing?

This might not be need. let me check back. As the default is already 0. I will check the spec and add if needed.

>> +	I915_WRITE(GEN6_RC6_THRESHOLD, 50000); /* 50/125ms per EI */
>> +
>> +	/* allows RC6 residency counter to work */
>> +	I915_WRITE(VLV_COUNTER_CONTROL,
>> +		   _MASKED_BIT_ENABLE(VLV_COUNT_RANGE_HIGH |
>> +				      VLV_MEDIA_RC6_COUNT_EN |
>> +				      VLV_RENDER_RC6_COUNT_EN));
>> +
>> +	/* Todo: If BIOS has not configured PCBR
>> +	 *       then allocate in BIOS Reserved */
>> +
>> +	/* For now we assume BIOS is allocating and populating the PCBR
>> */
> Both comments do not match with the code.

I will address the comments

>> +	pcbr = I915_READ(VLV_PCBR);
>> +
>> +	DRM_DEBUG_DRIVER("PCBR offset : 0x%x\n", pcbr);
>> +
>> +	/* 3: Enable RC6 */
>> +	if ((intel_enable_rc6(dev) & INTEL_RC6_ENABLE) &&
>> +						(pcbr >> VLV_PCBR_ADDR_SHIFT))
>> +		rc6_mode = GEN6_RC_CTL_EI_MODE(1) | VLV_RC_CTL_CTX_RST_PARALLEL;
>                                                      ^^
> Bit 24 is not used with chv.
>
> -Mika

I will remove this :) Missed while addressing previous comments

>> +
>> +	I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
>> +
>> +	gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
>> +}
>> +
>>   static void valleyview_enable_rps(struct drm_device *dev)
>>   {
>>   	struct drm_i915_private *dev_priv = dev->dev_private;
>> @@ -4624,13 +4719,17 @@ void intel_init_gt_powersave(struct drm_device *dev)
>>   {
>>   	i915.enable_rc6 = sanitize_rc6_option(dev, i915.enable_rc6);
>>   
>> -	if (IS_VALLEYVIEW(dev))
>> +	if (IS_CHERRYVIEW(dev))
>> +		cherryview_init_gt_powersave(dev);
>> +	else if (IS_VALLEYVIEW(dev))
>>   		valleyview_init_gt_powersave(dev);
>>   }
>>   
>>   void intel_cleanup_gt_powersave(struct drm_device *dev)
>>   {
>> -	if (IS_VALLEYVIEW(dev))
>> +	if (IS_CHERRYVIEW(dev))
>> +		return;
>> +	else if (IS_VALLEYVIEW(dev))
>>   		valleyview_cleanup_gt_powersave(dev);
>>   }
>>   
>> @@ -4644,11 +4743,13 @@ void intel_disable_gt_powersave(struct drm_device *dev)
>>   	if (IS_IRONLAKE_M(dev)) {
>>   		ironlake_disable_drps(dev);
>>   		ironlake_disable_rc6(dev);
>> -	} else if (IS_GEN6(dev) || IS_GEN7(dev)) {
>> +	} else if (INTEL_INFO(dev)->gen >= 6) {
>>   		cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
>>   		cancel_work_sync(&dev_priv->rps.work);
>>   		mutex_lock(&dev_priv->rps.hw_lock);
>> -		if (IS_VALLEYVIEW(dev))
>> +		if (IS_CHERRYVIEW(dev))
>> +			cherryview_disable_rps(dev);
>> +		else if (IS_VALLEYVIEW(dev))
>>   			valleyview_disable_rps(dev);
>>   		else
>>   			gen6_disable_rps(dev);
>> @@ -4666,7 +4767,9 @@ static void intel_gen6_powersave_work(struct work_struct *work)
>>   
>>   	mutex_lock(&dev_priv->rps.hw_lock);
>>   
>> -	if (IS_VALLEYVIEW(dev)) {
>> +	if (IS_CHERRYVIEW(dev)) {
>> +		cherryview_enable_rps(dev);
>> +	} else if (IS_VALLEYVIEW(dev)) {
>>   		valleyview_enable_rps(dev);
>>   	} else if (IS_BROADWELL(dev)) {
>>   		gen8_enable_rps(dev);
>> @@ -4691,7 +4794,7 @@ void intel_enable_gt_powersave(struct drm_device *dev)
>>   		ironlake_enable_rc6(dev);
>>   		intel_init_emon(dev);
>>   		mutex_unlock(&dev->struct_mutex);
>> -	} else if (IS_GEN6(dev) || IS_GEN7(dev)) {
>> +	} else if (INTEL_INFO(dev)->gen >= 6) {
>>   		/*
>>   		 * PCU communication is slow and this doesn't need to be
>>   		 * done at any specific time, so do this out of our fast path
>> -- 
>> 1.9.1
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Thanks for the review.




More information about the Intel-gfx mailing list