[Intel-gfx] [PATCH 09/11] drm/i915: BDW PSR: Remove DDIA limitation for Broadwell.
Rodrigo Vivi
rodrigo.vivi at gmail.com
Fri May 16 02:13:08 CEST 2014
Broadwell has a PSR per transcoder, where DDIA supports
link disable and link standby modes while other
transcoders only support link standby.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
---
drivers/gpu/drm/i915/intel_dp.c | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 9421b0b..47053e6 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1675,16 +1675,21 @@ static void intel_edp_psr_setup(struct intel_dp *intel_dp)
static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t aux_clock_divider;
int precharge = 0x3;
int msg_size = 5; /* Header(4) + Message(1) */
+ bool only_standby = false;
aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
+ if (IS_BROADWELL(dev) && dig_port->port != PORT_A)
+ only_standby = true;
+
/* Enable PSR in sink */
- if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT)
+ if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT || only_standby)
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
DP_PSR_ENABLE & ~DP_PSR_MAIN_LINK_ACTIVE);
else
@@ -1703,14 +1708,19 @@ static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp)
static void intel_edp_psr_enable_source(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t max_sleep_time = 0x1f;
uint32_t idle_frames = 1;
uint32_t val = 0x0;
const uint32_t link_entry_time = EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES;
+ bool only_standby = false;
- if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT) {
+ if (IS_BROADWELL(dev) && dig_port->port != PORT_A)
+ only_standby = true;
+
+ if (intel_dp->psr_dpcd[1] & DP_PSR_NO_TRAIN_ON_EXIT || only_standby) {
val |= EDP_PSR_LINK_STANDBY;
val |= EDP_PSR_TP2_TP3_TIME_0us;
val |= EDP_PSR_TP1_TIME_0us;
@@ -1738,8 +1748,13 @@ static bool intel_edp_psr_match_conditions(struct intel_dp *intel_dp)
dev_priv->psr.source_ok = false;
- if ((intel_encoder->type != INTEL_OUTPUT_EDP) ||
- (dig_port->port != PORT_A)) {
+ if (!HAS_PSR(dev)) {
+ DRM_DEBUG_KMS("PSR not supported on this platform\n");
+ return false;
+ }
+
+ if (IS_HASWELL(dev) && (intel_encoder->type != INTEL_OUTPUT_EDP ||
+ dig_port->port != PORT_A)) {
DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n");
return false;
}
--
1.9.0
More information about the Intel-gfx
mailing list