[Intel-gfx] [RFC 4/4] drm/i915: Switch to unified plane cursor handling
Matt Roper
matthew.d.roper at intel.com
Fri May 16 03:17:29 CEST 2014
The DRM core will translate calls to legacy cursor ioctls into universal
cursor calls automatically, so there's no need to maintain the legacy
cursor support. This greatly simplifies the transition since we don't
have to handle reference counting differently depending on which cursor
interface was called.
The aim here is to transition to the universal plane interface with
minimal code change. There's a lot of cleanup that can be done (e.g.,
using state stored in crtc->cursor->fb rather than intel_crtc) that is
left to future patches.
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 194 ++++++++++++++++++++++++-----------
drivers/gpu/drm/i915/intel_drv.h | 1 -
2 files changed, 136 insertions(+), 59 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7e75b13..d145130 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -68,6 +68,11 @@ static const uint32_t intel_primary_formats_gen4[] = {
DRM_FORMAT_ABGR2101010,
};
+/* Cursor formats */
+static const uint32_t intel_cursor_formats[] = {
+ DRM_FORMAT_ARGB8888,
+};
+
#define DIV_ROUND_CLOSEST_ULL(ll, d) \
({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; })
@@ -7967,8 +7972,8 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
- int x = intel_crtc->cursor_x;
- int y = intel_crtc->cursor_y;
+ int x = crtc->cursor_x;
+ int y = crtc->cursor_y;
u32 base = 0, pos = 0;
bool visible;
@@ -8023,8 +8028,6 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
* @height: cursor height
*
* Programs a crtc's cursor plane with the specified GEM object.
- * intel_crtc_cursor_set() should be used instead if we have a userspace buffer
- * handle rather than the actual GEM object.
*/
static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc,
struct drm_i915_gem_object *obj,
@@ -8143,48 +8146,6 @@ fail:
return ret;
}
-/**
- * intel_crtc_cursor_set - Update cursor buffer
- * @crtc: crtc to set cursor for
- * @handle: userspace handle of buffer to set cursor to
- * @width: cursor width
- * @height: cursor height
- *
- * Programs a crtc's cursor plane with the buffer referred to by userspace
- * handle @handle.
- */
-static int intel_crtc_cursor_set(struct drm_crtc *crtc,
- struct drm_file *file,
- uint32_t handle,
- uint32_t width, uint32_t height)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_gem_object *obj;
-
- if (handle) {
- obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
- if (&obj->base == NULL)
- return -ENOENT;
- } else {
- obj = NULL;
- }
-
- return intel_crtc_cursor_set_obj(crtc, obj, width, height);
-}
-
-static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
-{
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-
- intel_crtc->cursor_x = clamp_t(int, x, SHRT_MIN, SHRT_MAX);
- intel_crtc->cursor_y = clamp_t(int, y, SHRT_MIN, SHRT_MAX);
-
- if (intel_crtc->active)
- intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL);
-
- return 0;
-}
-
static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
u16 *blue, uint32_t start, uint32_t size)
{
@@ -8806,7 +8767,7 @@ static void intel_crtc_destroy(struct drm_crtc *crtc)
kfree(work);
}
- intel_crtc_cursor_set(crtc, NULL, 0, 0, 0);
+ intel_crtc_cursor_set_obj(crtc, NULL, 0, 0);
drm_crtc_cleanup(crtc);
@@ -10784,8 +10745,6 @@ out_config:
}
static const struct drm_crtc_funcs intel_crtc_funcs = {
- .cursor_set = intel_crtc_cursor_set,
- .cursor_move = intel_crtc_cursor_move,
.gamma_set = intel_crtc_gamma_set,
.set_config = intel_crtc_set_config,
.destroy = intel_crtc_destroy,
@@ -11018,7 +10977,8 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
return 0;
}
-static void intel_primary_plane_destroy(struct drm_plane *plane)
+/* Common destruction function for both primary and cursor planes */
+static void intel_plane_destroy(struct drm_plane *plane)
{
struct intel_plane *intel_plane = to_intel_plane(plane);
drm_plane_cleanup(plane);
@@ -11028,7 +10988,7 @@ static void intel_primary_plane_destroy(struct drm_plane *plane)
static const struct drm_plane_funcs intel_primary_plane_funcs = {
.update_plane = intel_primary_plane_setplane,
.disable_plane = intel_primary_plane_disable,
- .destroy = intel_primary_plane_destroy,
+ .destroy = intel_plane_destroy,
};
static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
@@ -11064,11 +11024,116 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
return &primary->base;
}
+static int
+intel_cursor_plane_disable(struct drm_plane *plane)
+{
+ if (!plane->fb)
+ return 0;
+
+ BUG_ON(!plane->crtc);
+
+ return intel_crtc_cursor_set_obj(plane->crtc, NULL, 0, 0);
+}
+
+static int
+intel_cursor_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
+ struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
+{
+ struct drm_device *dev = crtc->dev;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct drm_i915_gem_object *obj = intel_fb->obj;
+ struct drm_rect dest = {
+ /* integer pixels */
+ .x1 = crtc_x,
+ .y1 = crtc_y,
+ .x2 = crtc_x + crtc_w,
+ .y2 = crtc_y + crtc_h,
+ };
+ struct drm_rect src = {
+ /* 16.16 fixed point */
+ .x1 = src_x,
+ .y1 = src_y,
+ .x2 = src_x + src_w,
+ .y2 = src_y + src_h,
+ };
+ const struct drm_rect clip = {
+ /* integer pixels */
+ .x2 = intel_crtc->config.pipe_src_w,
+ .y2 = intel_crtc->config.pipe_src_h,
+ };
+ int hscale, vscale;
+ bool visible;
+
+ /* Check scaling */
+ hscale = drm_rect_calc_hscale(&src, &dest,
+ DRM_PLANE_HELPER_NO_SCALING,
+ DRM_PLANE_HELPER_NO_SCALING);
+ vscale = drm_rect_calc_vscale(&src, &dest,
+ DRM_PLANE_HELPER_NO_SCALING,
+ DRM_PLANE_HELPER_NO_SCALING);
+ if (hscale < 0 || vscale < 0) {
+ DRM_DEBUG_KMS("Invalid scaling of cursor plane\n");
+ return -ERANGE;
+ }
+
+ /* Check dimensions */
+ if (!((crtc_w == 64 && crtc_h == 64) ||
+ (crtc_w == 128 && crtc_h == 128 && !IS_GEN2(dev)) ||
+ (crtc_w == 256 && crtc_h == 256 && !IS_GEN2(dev)))) {
+ DRM_DEBUG_KMS("Cursor dimension not supported: %dx%d\n",
+ crtc_w, crtc_h);
+ return -EINVAL;
+ }
+
+ /* Clip to display; if no longer visible after clipping, disable */
+ visible = drm_rect_clip_scaled(&src, &dest, &clip, hscale, vscale);
+
+ crtc->cursor_x = crtc_x;
+ crtc->cursor_y = crtc_y;
+ if (fb != crtc->cursor->fb) {
+ return intel_crtc_cursor_set_obj(crtc, visible ? obj : NULL,
+ crtc_w, crtc_h);
+ } else {
+ intel_crtc_update_cursor(crtc, true);
+ return 0;
+ }
+}
+static const struct drm_plane_funcs intel_cursor_plane_funcs = {
+ .update_plane = intel_cursor_plane_update,
+ .disable_plane = intel_cursor_plane_disable,
+ .destroy = intel_plane_destroy,
+};
+
+static struct drm_plane *intel_cursor_plane_create(struct drm_device *dev,
+ int pipe)
+{
+ struct intel_plane *cursor;
+
+ cursor = kzalloc(sizeof(*cursor), GFP_KERNEL);
+ if (cursor == NULL)
+ return NULL;
+
+ cursor->can_scale = false;
+ cursor->max_downscale = 1;
+ cursor->pipe = pipe;
+ cursor->plane = pipe;
+
+ drm_plane_init(dev, &cursor->base, 0,
+ &intel_cursor_plane_funcs, intel_cursor_formats,
+ ARRAY_SIZE(intel_cursor_formats), DRM_PLANE_TYPE_CURSOR);
+ return &cursor->base;
+}
+
static void intel_crtc_init(struct drm_device *dev, int pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc;
- struct drm_plane *primary;
+ struct drm_plane *primary = NULL;
+ struct drm_plane *cursor = NULL;
int i, ret;
intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
@@ -11076,13 +11141,17 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
return;
primary = intel_primary_plane_create(dev, pipe);
+ if (!primary)
+ goto fail;
+
+ cursor = intel_cursor_plane_create(dev, pipe);
+ if (!cursor)
+ goto fail;
+
ret = drm_crtc_init_with_planes(dev, &intel_crtc->base, primary,
- NULL, &intel_crtc_funcs);
- if (ret) {
- drm_plane_cleanup(primary);
- kfree(intel_crtc);
- return;
- }
+ cursor, &intel_crtc_funcs);
+ if (ret)
+ goto fail;
drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
for (i = 0; i < 256; i++) {
@@ -11110,6 +11179,15 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
+
+ return;
+
+fail:
+ if (primary)
+ drm_plane_cleanup(primary);
+ if (cursor)
+ drm_plane_cleanup(cursor);
+ kfree(intel_crtc);
}
enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 32a74e1..8374f37a 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -378,7 +378,6 @@ struct intel_crtc {
struct drm_i915_gem_object *cursor_bo;
uint32_t cursor_addr;
- int16_t cursor_x, cursor_y;
int16_t cursor_width, cursor_height;
bool cursor_visible;
--
1.8.5.1
More information about the Intel-gfx
mailing list