[Intel-gfx] [PATCH 5/6] drm/i915: Clear GDSR after reset on ILK
Jesse Barnes
jbarnes at virtuousgeek.org
Tue May 20 20:38:33 CEST 2014
On Mon, 19 May 2014 19:23:26 +0300
ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Clear the reset domain after a succesful GPU reset on ilk. We already
> do that on gen4, so let's try to be a bit more consistent. And if
> ether render or media reset fails, we might use the leftover value
> in the register to pinpoint the culprit.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_uncore.c | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
> index 5c29cfe..cd0d6e2 100644
> --- a/drivers/gpu/drm/i915/intel_uncore.c
> +++ b/drivers/gpu/drm/i915/intel_uncore.c
> @@ -1004,8 +1004,14 @@ static int ironlake_do_reset(struct drm_device *dev)
>
> I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR,
> ILK_GRDOM_MEDIA | ILK_GRDOM_RESET_ENABLE);
> - return wait_for((I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) &
> - ILK_GRDOM_RESET_ENABLE) == 0, 500);
> + ret = wait_for((I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) &
> + ILK_GRDOM_RESET_ENABLE) == 0, 500);
> + if (ret)
> + return ret;
> +
> + I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR, 0);
> +
> + return 0;
> }
>
> static int gen6_do_reset(struct drm_device *dev)
Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>
--
Jesse Barnes, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list