[Intel-gfx] [PATCH igt v2] tests/kms_mmio_vs_cs_flip: Add a test case to exercise mmio vs. CS flip races
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Wed May 21 14:17:44 CEST 2014
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
kms_mmio_vs_cs_flip has two subtests:
- setplane_vs_cs_flip tests the interaction between
fullscreen sprites and CS flips
- setcrtc_vs_cs_flip tests the interaction between
primary plane panning and CS flips
v2: Skip sprite test when there are no sprites
Reduce busy_bo to 64MB (now works on my gen2)
Handle pipe vs. port incompatibility
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
tests/Makefile.sources | 1 +
tests/kms_mmio_vs_cs_flip.c | 537 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 538 insertions(+)
create mode 100644 tests/kms_mmio_vs_cs_flip.c
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index 383a209..1f7931d 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -64,6 +64,7 @@ TESTS_progs_M = \
kms_fence_pin_leak \
kms_flip \
kms_flip_tiling \
+ kms_mmio_vs_cs_flip \
kms_pipe_crc_basic \
kms_plane \
kms_render \
diff --git a/tests/kms_mmio_vs_cs_flip.c b/tests/kms_mmio_vs_cs_flip.c
new file mode 100644
index 0000000..a724721
--- /dev/null
+++ b/tests/kms_mmio_vs_cs_flip.c
@@ -0,0 +1,537 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <time.h>
+
+#include "drmtest.h"
+#include "igt_debugfs.h"
+#include "igt_kms.h"
+#include "intel_chipset.h"
+#include "ioctl_wrappers.h"
+
+typedef struct {
+ int drm_fd;
+ igt_display_t display;
+ igt_pipe_crc_t *pipe_crc;
+ drm_intel_bufmgr *bufmgr;
+ drm_intel_bo *busy_bo;
+ uint32_t devid;
+ bool flip_done;
+} data_t;
+
+static void exec_nop(data_t *data, uint32_t handle, unsigned int ring)
+{
+ struct intel_batchbuffer *batch;
+ drm_intel_bo *bo;
+
+ batch = intel_batchbuffer_alloc(data->bufmgr, data->devid);
+ igt_assert(batch);
+
+ bo = gem_handle_to_libdrm_bo(data->bufmgr, data->drm_fd, "", handle);
+ igt_assert(bo);
+
+ /* add relocs to make sure the kernel will think we write to dst */
+ BEGIN_BATCH(4);
+ OUT_BATCH(MI_BATCH_BUFFER_END);
+ OUT_BATCH(MI_NOOP);
+ OUT_RELOC(bo, I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER, 0);
+ OUT_BATCH(MI_NOOP);
+ ADVANCE_BATCH();
+
+ intel_batchbuffer_flush_on_ring(batch, ring);
+ intel_batchbuffer_free(batch);
+
+ drm_intel_bo_unreference(bo);
+}
+
+static void exec_blt(data_t *data)
+{
+ struct intel_batchbuffer *batch;
+ int w, h, pitch, i;
+
+ batch = intel_batchbuffer_alloc(data->bufmgr, data->devid);
+ igt_assert(batch);
+
+ w = 8192;
+ h = data->busy_bo->size / (8192 * 4);
+ pitch = w * 4;
+
+ for (i = 0; i < 40; i++) {
+ BLIT_COPY_BATCH_START(data->devid, 0);
+ OUT_BATCH((3 << 24) | /* 32 bits */
+ (0xcc << 16) | /* copy ROP */
+ pitch);
+ OUT_BATCH(0 << 16 | 0);
+ OUT_BATCH(h << 16 | w);
+ OUT_RELOC(data->busy_bo, I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER, 0);
+ BLIT_RELOC_UDW(data->devid);
+ OUT_BATCH(0 << 16 | 0);
+ OUT_BATCH(pitch);
+ OUT_RELOC(data->busy_bo, I915_GEM_DOMAIN_RENDER, 0, 0);
+ BLIT_RELOC_UDW(data->devid);
+ ADVANCE_BATCH();
+ }
+
+ intel_batchbuffer_flush(batch);
+ intel_batchbuffer_free(batch);
+}
+
+static void page_flip_handler(int fd, unsigned int frame, unsigned int sec,
+ unsigned int usec, void *_data)
+{
+ data_t *data = _data;
+
+ data->flip_done = true;
+}
+
+static void wait_for_flip(data_t *data, uint32_t flip_handle)
+{
+ struct timeval timeout = {
+ .tv_sec = 3,
+ .tv_usec = 0,
+ };
+ drmEventContext evctx = {
+ .version = DRM_EVENT_CONTEXT_VERSION,
+ .page_flip_handler = page_flip_handler,
+ };
+ fd_set fds;
+
+ FD_ZERO(&fds);
+ FD_SET(data->drm_fd, &fds);
+
+ while (!data->flip_done) {
+ int ret = select(data->drm_fd + 1, &fds, NULL, NULL, &timeout);
+
+ if (ret < 0 && errno == EINTR)
+ continue;
+
+ igt_assert(ret >= 0);
+
+ do_or_die(drmHandleEvent(data->drm_fd, &evctx));
+ }
+
+ /*
+ * The flip completion may have been signalled prematurely, so
+ * also submit another nop batch and wait for it to make sure
+ * the ring has really been drained.
+ */
+ if (IS_GEN7(data->devid) || IS_GEN8(data->devid))
+ exec_nop(data, flip_handle, I915_EXEC_BLT);
+ else
+ exec_nop(data, flip_handle, I915_EXEC_RENDER);
+ gem_sync(data->drm_fd, flip_handle);
+}
+
+static void make_gpu_busy(data_t *data, uint32_t flip_handle)
+{
+ /*
+ * Make sure flip_handle has been used on the blt ring.
+ * This should make the flip use the same ring on gen7+.
+ */
+ if (IS_GEN7(data->devid) || IS_GEN8(data->devid))
+ exec_nop(data, flip_handle, I915_EXEC_BLT);
+
+ /*
+ * Add a pile commands to the ring. The flip will be
+ * stuck behing these commands and hence gets delayed
+ * significantly.
+ */
+ exec_blt(data);
+
+ /*
+ * Make sure the render ring will block until the blt ring is clear.
+ * This is in case the flip will execute on the render ring and the
+ * blits were on the blt ring (this will be the case on gen6 at least).
+ *
+ * We can't add an explicit dependency between flip_handle and the
+ * blits since that would cause the driver to block until the blits
+ * have completed before it will perform a subsequent mmio flip,
+ * and so the test would fail to exercise the mmio vs. CS flip race.
+ */
+ if (HAS_BLT_RING(data->devid))
+ exec_nop(data, data->busy_bo->handle, I915_EXEC_RENDER);
+}
+
+/*
+ * 1. set primary plane to full red
+ * 2. grab a reference crc
+ * 3. set primary plane to full blue
+ * 4. queue lots of GPU activity to delay the subsequent page flip
+ * 5. queue a page flip to the same blue fb
+ * 6. toggle a fullscreen sprite (green) on and back off again
+ * 7. set primary plane to red fb
+ * 8. wait for GPU to finish
+ * 9. compare current crc with reference crc
+ *
+ * We expect the primary plane to display full red at the end.
+ * If the sprite operations have interfered with the page flip,
+ * the driver may have mistakenly completed the flip before
+ * it was executed by the CS, and hence the subsequent mmio
+ * flips may have overtaken it. So once we've finished everything
+ * the CS flip may have been the last thing to occur, which means
+ * the primary plane may be full blue instead of the red it's
+ * supposed to be.
+ */
+static void
+test_plane(data_t *data, igt_output_t *output, enum pipe pipe, enum igt_plane plane)
+{
+ struct igt_fb red_fb, green_fb, blue_fb;
+ drmModeModeInfo *mode;
+ igt_plane_t *primary, *sprite;
+ igt_crc_t ref_crc, crc;
+ int ret;
+
+ igt_output_set_pipe(output, pipe);
+ igt_display_commit(&data->display);
+
+ if (!output->valid) {
+ igt_output_set_pipe(output, PIPE_ANY);
+ igt_display_commit(&data->display);
+ return;
+ }
+
+ primary = igt_output_get_plane(output, 0);
+ sprite = igt_output_get_plane(output, plane);
+
+ mode = igt_output_get_mode(output);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 1.0, 0.0, 0.0,
+ &red_fb);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 0.0, 1.0, 0.0,
+ &green_fb);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 0.0, 0.0, 1.0,
+ &blue_fb);
+
+ /*
+ * Make sure these buffers are suited for display use
+ * because most of the modeset operations must be fast
+ * later on.
+ */
+ igt_plane_set_fb(primary, &blue_fb);
+ igt_display_commit(&data->display);
+ igt_plane_set_fb(sprite, &green_fb);
+ igt_display_commit(&data->display);
+ igt_plane_set_fb(sprite, NULL);
+ igt_display_commit(&data->display);
+
+ if (data->pipe_crc)
+ igt_pipe_crc_free(data->pipe_crc);
+ data->pipe_crc = igt_pipe_crc_new(pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
+
+ /* set red fb and grab reference crc */
+ igt_plane_set_fb(primary, &red_fb);
+ igt_display_commit(&data->display);
+ igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
+
+ ret = drmModeSetCrtc(data->drm_fd, output->config.crtc->crtc_id,
+ blue_fb.fb_id, 0, 0, &output->id, 1,
+ mode);
+ igt_assert(ret == 0);
+
+ make_gpu_busy(data, blue_fb.gem_handle);
+
+ data->flip_done = false;
+ ret = drmModePageFlip(data->drm_fd, output->config.crtc->crtc_id,
+ blue_fb.fb_id, DRM_MODE_PAGE_FLIP_EVENT, data);
+ igt_assert(ret == 0);
+
+ /*
+ * Toggle a fullscreen sprite on and back off. This will result
+ * in the primary plane getting disabled and re-enbled, and that
+ * leads to mmio flips. The driver may then mistake the flip done
+ * interrupts from the mmio flips as the flip done interrupts for
+ * the CS flip, and hence subsequent mmio flips won't wait for the
+ * CS flips like they should.
+ */
+ ret = drmModeSetPlane(data->drm_fd,
+ sprite->drm_plane->plane_id,
+ output->config.crtc->crtc_id,
+ green_fb.fb_id, 0,
+ 0, 0, mode->hdisplay, mode->vdisplay,
+ 0, 0, mode->hdisplay << 16, mode->vdisplay << 16);
+ igt_assert(ret == 0);
+ ret = drmModeSetPlane(data->drm_fd,
+ sprite->drm_plane->plane_id,
+ output->config.crtc->crtc_id,
+ 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0);
+ igt_assert(ret == 0);
+
+ /*
+ * Set primary plane to red fb. This should wait for the CS flip
+ * to complete. But if the kernel mistook the flip done interrupt
+ * from the mmio flip as the flip done from the CS flip, this will
+ * not wait for anything. And hence the the CS flip will actually
+ * occur after this mmio flip.
+ */
+ ret = drmModeSetCrtc(data->drm_fd, output->config.crtc->crtc_id,
+ red_fb.fb_id, 0, 0, &output->id, 1,
+ mode);
+ igt_assert(ret == 0);
+
+ /* Make sure the flip has been executed */
+ wait_for_flip(data, blue_fb.gem_handle);
+
+ /* Grab crc and compare with the extected result */
+ igt_pipe_crc_collect_crc(data->pipe_crc, &crc);
+
+ igt_plane_set_fb(primary, NULL);
+ igt_display_commit(&data->display);
+
+ igt_remove_fb(data->drm_fd, &red_fb);
+ igt_remove_fb(data->drm_fd, &green_fb);
+ igt_remove_fb(data->drm_fd, &blue_fb);
+
+ igt_pipe_crc_free(data->pipe_crc);
+ data->pipe_crc = NULL;
+
+ igt_output_set_pipe(output, PIPE_ANY);
+ igt_display_commit(&data->display);
+
+ igt_assert(igt_crc_equal(&ref_crc, &crc));
+}
+
+/*
+ * 1. set primary plane to full red
+ * 2. grab a reference crc
+ * 3. set primary plane to full green
+ * 4. wait for vblank
+ * 5. pan primary plane a bit (to cause a mmio flip w/o vblank wait)
+ * 6. queue lots of GPU activity to delay the subsequent page flip
+ * 6. queue a page flip to a blue fb
+ * 7. set primary plane to red fb
+ * 8. wait for GPU to finish
+ * 9. compare current crc with reference crc
+ *
+ * We expect the primary plane to display full red at the end.
+ * If the previously schedule primary plane pan operation has interfered
+ * with the following page flip, the driver may have mistakenly completed
+ * the flip before it was executed by the CS, and hence the subsequent mmio
+ * flips may have overtaken it. So once we've finished everything
+ * the CS flip may have been the last thing to occur, which means
+ * the primary plane may be full blue instead of the red it's
+ * supposed to be.
+ */
+static void
+test_crtc(data_t *data, igt_output_t *output, enum pipe pipe)
+{
+ struct igt_fb red_fb, green_fb, blue_fb;
+ drmModeModeInfo *mode;
+ igt_plane_t *primary;
+ igt_crc_t ref_crc, crc;
+ int ret;
+
+ igt_output_set_pipe(output, pipe);
+ igt_display_commit(&data->display);
+
+ if (!output->valid) {
+ igt_output_set_pipe(output, PIPE_ANY);
+ igt_display_commit(&data->display);
+ return;
+ }
+
+ primary = igt_output_get_plane(output, 0);
+
+ mode = igt_output_get_mode(output);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay+1,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 1.0, 0.0, 0.0,
+ &red_fb);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay+1,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 0.0, 0.0, 1.0,
+ &blue_fb);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay+1,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 0.0, 1.0, 0.0,
+ &green_fb);
+
+ /*
+ * Make sure these buffers are suited for display use
+ * because most of the modeset operations must be fast
+ * later on.
+ */
+ igt_plane_set_fb(primary, &green_fb);
+ igt_display_commit(&data->display);
+ igt_plane_set_fb(primary, &blue_fb);
+ igt_display_commit(&data->display);
+
+ if (data->pipe_crc)
+ igt_pipe_crc_free(data->pipe_crc);
+ data->pipe_crc = igt_pipe_crc_new(pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
+
+ /* set red fb and grab reference crc */
+ igt_plane_set_fb(primary, &red_fb);
+ igt_display_commit(&data->display);
+ igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
+
+ /*
+ * Further down we need to issue an mmio flip w/o the kernel
+ * waiting for vblank. The easiest way is to just pan within
+ * the same FB. So pan away a bit here, and later we undo this
+ * with another pan which will result in the desired mmio flip.
+ */
+ ret = drmModeSetCrtc(data->drm_fd, output->config.crtc->crtc_id,
+ green_fb.fb_id, 0, 1, &output->id, 1,
+ mode);
+ igt_assert(ret == 0);
+
+ /*
+ * Make it more likely that the CS flip has been submitted into the
+ * ring by the time the mmio flip from the drmModeSetCrtc() below
+ * completes. The driver will then mistake the flip done interrupt
+ * from the mmio flip as the flip done interrupt from the CS flip.
+ */
+ igt_wait_for_vblank(data->drm_fd, pipe);
+
+ /* now issue the mmio flip w/o vblank waits in the kernel, ie. pan a bit */
+ ret = drmModeSetCrtc(data->drm_fd, output->config.crtc->crtc_id,
+ green_fb.fb_id, 0, 0, &output->id, 1,
+ mode);
+ igt_assert(ret == 0);
+
+ make_gpu_busy(data, blue_fb.gem_handle);
+
+ /*
+ * Submit the CS flip. The commands must be emitted into the ring
+ * before the mmio flip from the panning operation completes.
+ */
+ data->flip_done = false;
+ ret = drmModePageFlip(data->drm_fd, output->config.crtc->crtc_id,
+ blue_fb.fb_id, DRM_MODE_PAGE_FLIP_EVENT, data);
+ igt_assert(ret == 0);
+
+ /*
+ * Set primary plane to red fb. This should wait for the CS flip
+ * to complete. But if the kernel mistook the flip done interrupt
+ * from the mmio flip as the flip done from the CS flip, this will
+ * not wait for anything. And hence the the CS flip will actually
+ * occur after this mmio flip.
+ */
+ ret = drmModeSetCrtc(data->drm_fd, output->config.crtc->crtc_id,
+ red_fb.fb_id, 0, 0, &output->id, 1,
+ mode);
+ igt_assert(ret == 0);
+
+ /* Make sure the flip has been executed */
+ wait_for_flip(data, blue_fb.gem_handle);
+
+ /* Grab crc and compare with the extected result */
+ igt_pipe_crc_collect_crc(data->pipe_crc, &crc);
+
+ igt_plane_set_fb(primary, NULL);
+ igt_display_commit(&data->display);
+
+ igt_remove_fb(data->drm_fd, &red_fb);
+ igt_remove_fb(data->drm_fd, &green_fb);
+ igt_remove_fb(data->drm_fd, &blue_fb);
+
+ igt_pipe_crc_free(data->pipe_crc);
+ data->pipe_crc = NULL;
+
+ igt_output_set_pipe(output, PIPE_ANY);
+ igt_display_commit(&data->display);
+
+ igt_assert(igt_crc_equal(&ref_crc, &crc));
+}
+
+static void
+run_plane_test_for_pipe(data_t *data, enum pipe pipe)
+{
+ igt_output_t *output;
+ enum igt_plane plane = 1; /* testing with one sprite is enough */
+
+ igt_require(data->display.pipes[pipe].n_planes > 2);
+
+ for_each_connected_output(&data->display, output)
+ test_plane(data, output, pipe, plane);
+}
+
+static void
+run_crtc_test_for_pipe(data_t *data, enum pipe pipe)
+{
+ igt_output_t *output;
+
+ for_each_connected_output(&data->display, output)
+ test_crtc(data, output, pipe);
+}
+
+static data_t data;
+
+igt_main
+{
+ int pipe;
+
+ igt_skip_on_simulation();
+
+ igt_fixture {
+ data.drm_fd = drm_open_any();
+
+ igt_set_vt_graphics_mode();
+
+ data.devid = intel_get_drm_devid(data.drm_fd);
+
+ igt_require_pipe_crc();
+ igt_display_init(&data.display, data.drm_fd);
+
+ data.bufmgr = drm_intel_bufmgr_gem_init(data.drm_fd, 4096);
+ igt_assert(data.bufmgr);
+ drm_intel_bufmgr_gem_enable_reuse(data.bufmgr);
+
+ data.busy_bo = drm_intel_bo_alloc(data.bufmgr, "bo",
+ 64*1024*1024, 4096);
+ gem_set_tiling(data.drm_fd, data.busy_bo->handle, 0, 4096);
+ }
+
+ igt_subtest_f("setplane_vs_cs_flip") {
+ for (pipe = 0; pipe < data.display.n_pipes; pipe++)
+ run_plane_test_for_pipe(&data, pipe);
+ }
+
+ igt_subtest_f("setcrtc_vs_cs_flip") {
+ for (pipe = 0; pipe < data.display.n_pipes; pipe++)
+ run_crtc_test_for_pipe(&data, pipe);
+ }
+
+ igt_fixture {
+ drm_intel_bo_unreference(data.busy_bo);
+ drm_intel_bufmgr_destroy(data.bufmgr);
+ igt_display_fini(&data.display);
+ }
+}
--
1.8.5.5
More information about the Intel-gfx
mailing list