[Intel-gfx] [PATCH 1/2] drm/i915: Improve irq handling after gpu resets

[Daniel Vetter]

Currently we do a full re-init of all interrupts after a gpu hang.
Which is pretty bad since we don't restore the interrupts we've
enabled at runtime correctly. Even with that addressed it's rather
horribly race.

But on g4x and later we only reset the gt and not the entire gpu.
Which means we only need to reset the GT interrupt bits. Which has the
nice benefit that vblank waits, pipe CRC interrupts and everything
else display related just keeps on working.

The downside is that gt interrupt handling (i.e. ring->get/put_irq) is
still racy. But as long as the gpu hang reliably wakes all waters and
we have a short time where the refcount drops to 0 we'll recover. So
not that bad really.

v2: Ville noticed that GTIMR and PMIMR don't get cleared, only the
subordinate per-ring registers. So let's rip out all the interrupt dancing.
The FIXME comment is still required though since the ring irq handling
happens at the per-ring interrupt mask registers, too.

Testcase: igt/kms_flip/vblank-vs-hang
Testcase: igt/kms_pipe_crc_basic/hang-*
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/i915_drv.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index c83c83b74bf4..7ae906c811bb 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -811,17 +811,17 @@ int i915_reset(struct drm_device *dev)
 		}
 
 		/*
-		 * FIXME: This is horribly race against concurrent pageflip and
-		 * vblank wait ioctls since they can observe dev->irqs_disabled
-		 * being false when they shouldn't be able to.
+		 * FIXME: This races pretty badly against concurrent holders of
+		 * ring interrupts. This is possible since we've started to drop
+		 * dev->struct_mutex in select places when waiting for the gpu.
 		 */
-		drm_irq_uninstall(dev);
-		drm_irq_install(dev, dev->pdev->irq);
 
-		/* rps/rc6 re-init is necessary to restore state lost after the
-		 * reset and the re-install of drm irq. Skip for ironlake per
+		/*
+		 * rps/rc6 re-init is necessary to restore state lost after the
+		 * reset and the re-install of gt irqs. Skip for ironlake per
 		 * previous concerns that it doesn't respond well to some forms
-		 * of re-init after reset. */
+		 * of re-init after reset.
+		 */
 		if (INTEL_INFO(dev)->gen > 5)
 			intel_reset_gt_powersave(dev);
 
-- 
1.8.4.rc3