[Intel-gfx] [PATCH 3/4] drm/i915: don't force full modeset if primary plane is disabled (v2)

[Matt Roper]

In a future patch, we'll allow the primary plane to be disabled by
userspace via the universal plane API.  If a modeset is requested while
the primary plane is disabled, crtc->primary->fb will be NULL which
generally triggers a full modeset (except in fastboot situations).  If
we detect that the crtc is active, but there's no primary plane fb,
we should still allow a simple plane update rather than a full modeset
if the mode isn't actually changing (after re-enabling the primary plane
of course).

v2:
 - Enable plane after set_base to avoid enabling the plane if set_base
   fails, and to make flip+enable atomic (suggested by Ville)
 - Drop BUG to WARN if we somehow enter the 'fb_changed' modeset case
   with the crtc disabled (suggested by Ville)

Reviewed-by: Chon Ming Lee <chon.ming.lee at intel.com>
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 731cd01..c2aedac 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10544,12 +10544,17 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set,
 	if (is_crtc_connector_off(set)) {
 		config->mode_changed = true;
 	} else if (set->crtc->primary->fb != set->fb) {
-		/* If we have no fb then treat it as a full mode set */
+		/*
+		 * If we have no fb, we can only flip as long as the crtc is
+		 * active, otherwise we need a full mode set.  The crtc may
+		 * be active if we've only disabled the primary plane, or
+		 * in fastboot situations.
+		 */
 		if (set->crtc->primary->fb == NULL) {
 			struct intel_crtc *intel_crtc =
 				to_intel_crtc(set->crtc);
 
-			if (intel_crtc->active && i915.fastboot) {
+			if (intel_crtc->active) {
 				DRM_DEBUG_KMS("crtc has no fb, will flip\n");
 				config->fb_changed = true;
 			} else {
@@ -10787,10 +10792,24 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 		ret = intel_set_mode(set->crtc, set->mode,
 				     set->x, set->y, set->fb);
 	} else if (config->fb_changed) {
+		struct drm_i915_private *dev_priv = dev->dev_private;
+		struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
+
 		intel_crtc_wait_for_pending_flips(set->crtc);
 
 		ret = intel_pipe_set_base(set->crtc,
 					  set->x, set->y, set->fb);
+
+		/*
+		 * We need to make sure the primary plane is re-enabled if it
+		 * has previously been turned off.
+		 */
+		if (!intel_crtc->primary_enabled && ret == 0) {
+			WARN_ON(!intel_crtc->active);
+			intel_enable_primary_hw_plane(dev_priv, intel_crtc->plane,
+						      intel_crtc->pipe);
+		}
+
 		/*
 		 * In the fastboot case this may be our only check of the
 		 * state after boot.  It would be better to only do it on
-- 
1.8.5.1