[Intel-gfx] [PATCH 07/17] drm: Add atomic/plane helpers

Daniel Vetter daniel.vetter at ffwll.ch
Sun Nov 2 14:19:20 CET 2014


This is the first cut of atomic helper code. As-is it's only useful to
implement a pure atomic interface for plane updates.

Later patches will integrate this with the crtc helpers so that full
atomic updates are possible. We also need a pile of helpers to aid
drivers in transitioning from the legacy world to the shiny new atomic
age. Finally we need helpers to implement legacy ioctls on top of the
atomic interface.

The design of the overall helpers<->driver interaction is fairly
simple, but has an unfortunate large interface:

- We have ->atomic_check callbacks for crtcs and planes. The idea is
  that connectors don't need any checking, and if they do they can
  adjust the relevant crtc driver-private state. So no connector hooks
  should be needed. Also the crtc helpers integration will do the
  ->best_encoder checks, so no need for that.

- Framebuffer pinning needs to be done before we can commit to the hw
  state. This is especially important for async updates where we must
  pin all buffers before returning to userspace, so that really only
  hw failures can happen in the asynchronous worker.

  Hence we add ->prepare_fb and ->cleanup_fb hooks for this resources
  management.

- The actual atomic plane commit can't fail (except hw woes), so has
  void return type. It has three stages:
  1. Prepare all affected crtcs with crtc->atomic_begin. Drivers can
     use this to unset the GO bit or similar latches to prevent plane
     updates.
  2. Update plane state by looping over all changed planes and calling
     plane->atomic_update. Presuming the hardware is sane and has GO
     bits drivers can simply bash the state into the hardware in this
     function. Other drivers might use this to precompute hw state for
     the final step.
  3. Finally latch the update for the next vblank with
     crtc->atomic_flush. Note that this function doesn't need to wait
     for the vblank to happen even for the synchronous case.

v2: Clear drm_<obj>_state->state to NULL when swapping in state.

v3: Add TODO that we don't short-circuit plane updates for now. Likely
no one will care.

v4: Squash in a bit of polish that somehow landed in the wrong (later)
patche.

v5: Integrate atomic functions into the drm docbook and fixup the
kerneldoc.

v6: Fixup fixup patch squashing fumble.

v7: Don't touch the legacy plane state plane->fb and plane->crtc. This
is only used by the legacy ioctl code in the drm core, and that code
already takes care of updating the pointers in all relevant cases.
This is in stark contrast to connector->encoder->crtc links on the
modeset side, which we still need to set since the core doesn't touch
them.

Also some more kerneldoc polish.

v8: Drop outdated comment.

v9: Handle the state->state pointer correctly: Only clearing the
->state pointer when assigning the state to the kms object isn't good
enough. We also need to re-link the swapped out state into the
drm_atomic_state structure.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 Documentation/DocBook/drm.tmpl      |   4 +
 drivers/gpu/drm/Makefile            |   2 +-
 drivers/gpu/drm/drm_atomic_helper.c | 355 ++++++++++++++++++++++++++++++++++++
 include/drm/drm_atomic_helper.h     |  44 +++++
 include/drm/drm_crtc.h              |   6 +
 include/drm/drm_crtc_helper.h       |   6 +
 include/drm/drm_plane_helper.h      |  22 +++
 7 files changed, 438 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/drm_atomic_helper.c
 create mode 100644 include/drm/drm_atomic_helper.h

diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index 89829ae58e97..ea0ef43b19e1 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -996,6 +996,10 @@ int max_width, max_height;</synopsis>
 !Edrivers/gpu/drm/drm_modes.c
     </sect2>
     <sect2>
+      <title>Atomic Mode Setting Function Reference</title>
+!Edrivers/gpu/drm/drm_atomic.c
+    </sect2>
+    <sect2>
       <title>Frame Buffer Creation</title>
       <synopsis>struct drm_framebuffer *(*fb_create)(struct drm_device *dev,
 				     struct drm_file *file_priv,
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 2e89cd50c14f..96338e349a24 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -24,7 +24,7 @@ drm-$(CONFIG_DRM_PANEL) += drm_panel.o
 drm-$(CONFIG_OF) += drm_of.o
 
 drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
-		drm_plane_helper.o drm_dp_mst_topology.o
+		drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o
 drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
 drm_kms_helper-$(CONFIG_DRM_KMS_FB_HELPER) += drm_fb_helper.o
 drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
new file mode 100644
index 000000000000..55a8eb2678b0
--- /dev/null
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -0,0 +1,355 @@
+/*
+ * Copyright (C) 2014 Red Hat
+ * Copyright (C) 2014 Intel Corp.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Rob Clark <robdclark at gmail.com>
+ * Daniel Vetter <daniel.vetter at ffwll.ch>
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_crtc_helper.h>
+
+static void
+drm_atomic_helper_plane_changed(struct drm_atomic_state *state,
+				struct drm_plane_state *plane_state,
+				struct drm_plane *plane)
+{
+	struct drm_crtc_state *crtc_state;
+
+	if (plane->state->crtc) {
+		crtc_state = state->crtc_states[drm_crtc_index(plane->crtc)];
+
+		if (WARN_ON(!crtc_state))
+			return;
+
+		crtc_state->planes_changed = true;
+	}
+
+	if (plane_state->crtc) {
+		crtc_state =
+			state->crtc_states[drm_crtc_index(plane_state->crtc)];
+
+		if (WARN_ON(!crtc_state))
+			return;
+
+		crtc_state->planes_changed = true;
+	}
+}
+
+/**
+ * drm_atomic_helper_check - validate state object
+ * @dev: DRM device
+ * @state: the driver state object
+ *
+ * Check the state object to see if the requested state is physically possible.
+ * Only crtcs and planes have check callbacks, so for any additional (global)
+ * checking that a driver needs it can simply wrap that around this function.
+ * Drivers without such needs can directly use this as their ->atomic_check()
+ * callback.
+ *
+ * RETURNS
+ * Zero for success or -errno
+ */
+int drm_atomic_helper_check(struct drm_device *dev,
+			    struct drm_atomic_state *state)
+{
+	int nplanes = dev->mode_config.num_total_plane;
+	int ncrtcs = dev->mode_config.num_crtc;
+	int i, ret = 0;
+
+	for (i = 0; i < nplanes; i++) {
+		struct drm_plane_helper_funcs *funcs;
+		struct drm_plane *plane = state->planes[i];
+		struct drm_plane_state *plane_state = state->plane_states[i];
+
+		if (!plane)
+			continue;
+
+		funcs = plane->helper_private;
+
+		drm_atomic_helper_plane_changed(state, plane_state, plane);
+
+		if (!funcs || !funcs->atomic_check)
+			continue;
+
+		ret = funcs->atomic_check(plane, plane_state);
+		if (ret) {
+			DRM_DEBUG_KMS("[PLANE:%d] atomic check failed\n",
+				      plane->base.id);
+			return ret;
+		}
+	}
+
+	for (i = 0; i < ncrtcs; i++) {
+		struct drm_crtc_helper_funcs *funcs;
+		struct drm_crtc *crtc = state->crtcs[i];
+
+		if (!crtc)
+			continue;
+
+		funcs = crtc->helper_private;
+
+		if (!funcs || !funcs->atomic_check)
+			continue;
+
+		ret = funcs->atomic_check(crtc, state->crtc_states[i]);
+		if (ret) {
+			DRM_DEBUG_KMS("[CRTC:%d] atomic check failed\n",
+				      crtc->base.id);
+			return ret;
+		}
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_atomic_helper_check);
+
+/**
+ * drm_atomic_helper_prepare_planes - prepare plane resources after commit
+ * @dev: DRM device
+ * @state: atomic state object with old state structures
+ *
+ * This function prepares plane state, specifically framebuffers, for the new
+ * configuration. If any failure is encountered this function will call
+ * ->cleanup_fb on any already successfully prepared framebuffer.
+ *
+ * Returns:
+ * 0 on success, negative error code on failure.
+ */
+int drm_atomic_helper_prepare_planes(struct drm_device *dev,
+				     struct drm_atomic_state *state)
+{
+	int nplanes = dev->mode_config.num_total_plane;
+	int ret, i;
+
+	for (i = 0; i < nplanes; i++) {
+		struct drm_plane_helper_funcs *funcs;
+		struct drm_plane *plane = state->planes[i];
+		struct drm_framebuffer *fb;
+
+		if (!plane)
+			continue;
+
+		funcs = plane->helper_private;
+
+		fb = state->plane_states[i]->fb;
+
+		if (fb && funcs->prepare_fb) {
+			ret = funcs->prepare_fb(plane, fb);
+			if (ret)
+				goto fail;
+		}
+	}
+
+	return 0;
+
+fail:
+	for (i--; i >= 0; i--) {
+		struct drm_plane_helper_funcs *funcs;
+		struct drm_plane *plane = state->planes[i];
+		struct drm_framebuffer *fb;
+
+		if (!plane)
+			continue;
+
+		funcs = plane->helper_private;
+
+		fb = state->plane_states[i]->fb;
+
+		if (fb && funcs->cleanup_fb)
+			funcs->cleanup_fb(plane, fb);
+
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_atomic_helper_prepare_planes);
+
+/**
+ * drm_atomic_helper_commit_planes - commit plane state
+ * @dev: DRM device
+ * @state: atomic state
+ *
+ * This function commits the new plane state using the plane and atomic helper
+ * functions for planes and crtcs. It assumes that the atomic state has already
+ * been pushed into the relevant object state pointers, since this step can no
+ * longer fail.
+ *
+ * It still requires the global state object @state to know which planes and
+ * crtcs need to be updated though.
+ */
+void drm_atomic_helper_commit_planes(struct drm_device *dev,
+				     struct drm_atomic_state *state)
+{
+	int nplanes = dev->mode_config.num_total_plane;
+	int ncrtcs = dev->mode_config.num_crtc;
+	int i;
+
+	for (i = 0; i < ncrtcs; i++) {
+		struct drm_crtc_helper_funcs *funcs;
+		struct drm_crtc *crtc = state->crtcs[i];
+
+		if (!crtc)
+			continue;
+
+		funcs = crtc->helper_private;
+
+		if (!funcs || !funcs->atomic_begin)
+			continue;
+
+		funcs->atomic_begin(crtc);
+	}
+
+	for (i = 0; i < nplanes; i++) {
+		struct drm_plane_helper_funcs *funcs;
+		struct drm_plane *plane = state->planes[i];
+
+		if (!plane)
+			continue;
+
+		funcs = plane->helper_private;
+
+		if (!funcs || !funcs->atomic_update)
+			continue;
+
+		funcs->atomic_update(plane);
+	}
+
+	for (i = 0; i < ncrtcs; i++) {
+		struct drm_crtc_helper_funcs *funcs;
+		struct drm_crtc *crtc = state->crtcs[i];
+
+		if (!crtc)
+			continue;
+
+		funcs = crtc->helper_private;
+
+		if (!funcs || !funcs->atomic_flush)
+			continue;
+
+		funcs->atomic_flush(crtc);
+	}
+}
+EXPORT_SYMBOL(drm_atomic_helper_commit_planes);
+
+/**
+ * drm_atomic_helper_cleanup_planes - cleanup plane resources after commit
+ * @dev: DRM device
+ * @old_state: atomic state object with old state structures
+ *
+ * This function cleans up plane state, specifically framebuffers, from the old
+ * configuration. Hence the old configuration must be perserved in @old_state to
+ * be able to call this function.
+ *
+ * This function must also be called on the new state when the atomic update
+ * fails at any point after calling drm_atomic_helper_prepare_planes().
+ */
+void drm_atomic_helper_cleanup_planes(struct drm_device *dev,
+				      struct drm_atomic_state *old_state)
+{
+	int nplanes = dev->mode_config.num_total_plane;
+	int i;
+
+	for (i = 0; i < nplanes; i++) {
+		struct drm_plane_helper_funcs *funcs;
+		struct drm_plane *plane = old_state->planes[i];
+		struct drm_framebuffer *old_fb;
+
+		if (!plane)
+			continue;
+
+		funcs = plane->helper_private;
+
+		old_fb = old_state->plane_states[i]->fb;
+
+		if (old_fb && funcs->cleanup_fb)
+			funcs->cleanup_fb(plane, old_fb);
+	}
+}
+EXPORT_SYMBOL(drm_atomic_helper_cleanup_planes);
+
+/**
+ * drm_atomic_helper_swap_state - store atomic state into current sw state
+ * @dev: DRM device
+ * @state: atomic state
+ *
+ * This function stores the atomic state into the current state pointers in all
+ * driver objects. It should be called after all failing steps have been done
+ * and succeeded, but before the actual hardware state is committed.
+ *
+ * For cleanup and error recovery the current state for all changed objects will
+ * be swaped into @state.
+ *
+ * With that sequence it fits perfectly into the plane prepare/cleanup sequence:
+ *
+ * 1. Call drm_atomic_helper_prepare_planes() with the staged atomic state.
+ *
+ * 2. Do any other steps that might fail.
+ *
+ * 3. Put the staged state into the current state pointers with this function.
+ *
+ * 4. Actually commit the hardware state.
+ *
+ * 5. Call drm_atomic_helper_cleanup_planes with @state, which since step 3
+ * contains the old state. Also do any other cleanup required with that state.
+ */
+void drm_atomic_helper_swap_state(struct drm_device *dev,
+				  struct drm_atomic_state *state)
+{
+	int i;
+
+	for (i = 0; i < dev->mode_config.num_connector; i++) {
+		struct drm_connector *connector = state->connectors[i];
+
+		if (!connector)
+			continue;
+
+		connector->state->state = state;
+		swap(state->connector_states[i], connector->state);
+		connector->state->state = NULL;
+	}
+
+	for (i = 0; i < dev->mode_config.num_crtc; i++) {
+		struct drm_crtc *crtc = state->crtcs[i];
+
+		if (!crtc)
+			continue;
+
+		crtc->state->state = state;
+		swap(state->crtc_states[i], crtc->state);
+		crtc->state->state = NULL;
+	}
+
+	for (i = 0; i < dev->mode_config.num_total_plane; i++) {
+		struct drm_plane *plane = state->planes[i];
+
+		if (!plane)
+			continue;
+
+		plane->state->state = state;
+		swap(state->plane_states[i], plane->state);
+		plane->state->state = NULL;
+	}
+}
+EXPORT_SYMBOL(drm_atomic_helper_swap_state);
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
new file mode 100644
index 000000000000..79938c62e7ad
--- /dev/null
+++ b/include/drm/drm_atomic_helper.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2014 Red Hat
+ * Copyright (C) 2014 Intel Corp.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Rob Clark <robdclark at gmail.com>
+ * Daniel Vetter <daniel.vetter at ffwll.ch>
+ */
+
+#ifndef DRM_ATOMIC_HELPER_H_
+#define DRM_ATOMIC_HELPER_H_
+
+int drm_atomic_helper_check(struct drm_device *dev,
+			    struct drm_atomic_state *state);
+
+int drm_atomic_helper_prepare_planes(struct drm_device *dev,
+				     struct drm_atomic_state *state);
+void drm_atomic_helper_commit_planes(struct drm_device *dev,
+				     struct drm_atomic_state *state);
+void drm_atomic_helper_cleanup_planes(struct drm_device *dev,
+				      struct drm_atomic_state *old_state);
+
+void drm_atomic_helper_swap_state(struct drm_device *dev,
+				  struct drm_atomic_state *state);
+
+#endif /* DRM_ATOMIC_HELPER_H_ */
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index c3ce5b36da5f..d0068b7af678 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -229,6 +229,7 @@ struct drm_atomic_state;
 /**
  * struct drm_crtc_state - mutable crtc state
  * @enable: whether the CRTC should be enabled, gates all other state
+ * @planes_changed: for use by helpers and drivers when computing state updates
  * @mode: current mode timings
  * @event: optional pointer to a DRM event to signal upon completion of the
  * 	state update
@@ -237,6 +238,9 @@ struct drm_atomic_state;
 struct drm_crtc_state {
 	bool enable        : 1;
 
+	/* computed state bits used by helpers and drivers */
+	bool planes_changed : 1;
+
 	struct drm_display_mode mode;
 
 	struct drm_pending_vblank_event *event;
@@ -748,6 +752,8 @@ struct drm_plane {
 
 	enum drm_plane_type type;
 
+	void *helper_private;
+
 	struct drm_plane_state *state;
 };
 
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index a3d75fefd010..adec48b27aa5 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -81,6 +81,12 @@ struct drm_crtc_helper_funcs {
 
 	/* disable crtc when not in use - more explicit than dpms off */
 	void (*disable)(struct drm_crtc *crtc);
+
+	/* atomic helpers */
+	int (*atomic_check)(struct drm_crtc *crtc,
+			    struct drm_crtc_state *state);
+	void (*atomic_begin)(struct drm_crtc *crtc);
+	void (*atomic_flush)(struct drm_crtc *crtc);
 };
 
 /**
diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h
index 0e1dcb163b81..c2146a7d91fb 100644
--- a/include/drm/drm_plane_helper.h
+++ b/include/drm/drm_plane_helper.h
@@ -46,6 +46,28 @@ extern int drm_crtc_init(struct drm_device *dev,
 			 struct drm_crtc *crtc,
 			 const struct drm_crtc_funcs *funcs);
 
+/**
+ * drm_plane_helper_funcs - helper operations for CRTCs
+ *
+ * The helper operations are called by the mid-layer CRTC helper.
+ */
+struct drm_plane_helper_funcs {
+	int (*prepare_fb)(struct drm_plane *plane,
+			  struct drm_framebuffer *fb);
+	void (*cleanup_fb)(struct drm_plane *plane,
+			   struct drm_framebuffer *fb);
+
+	int (*atomic_check)(struct drm_plane *plane,
+			    struct drm_plane_state *state);
+	void (*atomic_update)(struct drm_plane *plane);
+};
+
+static inline void drm_plane_helper_add(struct drm_plane *plane,
+					const struct drm_plane_helper_funcs *funcs)
+{
+	plane->helper_private = (void *)funcs;
+}
+
 extern int drm_plane_helper_check_update(struct drm_plane *plane,
 					 struct drm_crtc *crtc,
 					 struct drm_framebuffer *fb,
-- 
2.1.1




More information about the Intel-gfx mailing list