[Intel-gfx] [PATCH 09/17] drm/crtc-helper: Transitional functions using atomic plane helpers
Daniel Vetter
daniel.vetter at ffwll.ch
Sun Nov 2 14:19:22 CET 2014
These two functions allow drivers to reuse their atomic plane helpers
functions for the primary plane to implement the interfaces required
by the crtc helpers for the legacy ->set_config callback.
This is purely transitional and won't be used once the driver is fully
converted. But it allows partial conversions to the atomic plane
helpers which are functional.
v2:
- Use ->atomic_duplicate_state if available.
- Don't forget to run crtc_funcs->atomic_check.
v3: Shift source coordinates correctly for 16.16 fixed point.
v4: Don't forget to call ->atomic_destroy_state if available.
v5: Fixup kerneldoc.
v6: Reuse the plane_commit function from the transitional plane
helpers to avoid too much duplication.
v7:
- Remove some stale comment.
- Correctly handle the lack of plane->state object, necessary for
transitional use.
v8: Fixup an embarrassing h/vdisplay mixup.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/drm_crtc_helper.c | 110 +++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/drm_plane_helper.c | 10 ++--
include/drm/drm_crtc.h | 4 ++
include/drm/drm_crtc_helper.h | 7 +++
include/drm/drm_plane_helper.h | 4 ++
5 files changed, 130 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 6c65a0a28fbd..95ecbb131053 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -38,6 +38,7 @@
#include <drm/drm_fourcc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
+#include <drm/drm_plane_helper.h>
#include <drm/drm_edid.h>
MODULE_AUTHOR("David Airlie, Jesse Barnes");
@@ -888,3 +889,112 @@ void drm_helper_resume_force_mode(struct drm_device *dev)
drm_modeset_unlock_all(dev);
}
EXPORT_SYMBOL(drm_helper_resume_force_mode);
+
+/**
+ * drm_helper_crtc_mode_set - mode_set implementation for atomic plane helpers
+ * @crtc: DRM CRTC
+ * @mode: DRM display mode which userspace requested
+ * @adjusted_mode: DRM display mode adjusted by ->mode_fixup callbacks
+ * @x: x offset of the CRTC scanout area on the underlying framebuffer
+ * @y: y offset of the CRTC scanout area on the underlying framebuffer
+ * @old_fb: previous framebuffer
+ *
+ * This function implements a callback useable as the ->mode_set callback
+ * required by the crtc helpers. Besides the atomic plane helper functions for
+ * the primary plane the driver must also provide the ->mode_set_nofb callback
+ * to set up the crtc.
+ *
+ * This is a transitional helper useful for converting drivers to the atomic
+ * interfaces.
+ */
+int drm_helper_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_crtc_state *crtc_state;
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ int ret;
+
+ if (crtc->funcs->atomic_duplicate_state)
+ crtc_state = crtc->funcs->atomic_duplicate_state(crtc);
+ else if (crtc->state)
+ crtc_state = kmemdup(crtc->state, sizeof(*crtc_state),
+ GFP_KERNEL);
+ else
+ crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
+ if (!crtc_state)
+ return -ENOMEM;
+
+ crtc_state->enable = true;
+ crtc_state->planes_changed = true;
+ drm_mode_copy(&crtc_state->mode, mode);
+ drm_mode_copy(&crtc_state->adjusted_mode, adjusted_mode);
+
+ if (crtc_funcs->atomic_check) {
+ ret = crtc_funcs->atomic_check(crtc, crtc_state);
+ if (ret) {
+ kfree(crtc_state);
+
+ return ret;
+ }
+ }
+
+ swap(crtc->state, crtc_state);
+
+ crtc_funcs->mode_set_nofb(crtc);
+
+ if (crtc_state) {
+ if (crtc->funcs->atomic_destroy_state)
+ crtc->funcs->atomic_destroy_state(crtc, crtc_state);
+ else
+ kfree(crtc_state);
+ }
+
+ return drm_helper_crtc_mode_set_base(crtc, x, y, old_fb);
+}
+EXPORT_SYMBOL(drm_helper_crtc_mode_set);
+
+/**
+ * drm_helper_crtc_mode_set_base - mode_set_base implementation for atomic plane helpers
+ * @crtc: DRM CRTC
+ * @x: x offset of the CRTC scanout area on the underlying framebuffer
+ * @y: y offset of the CRTC scanout area on the underlying framebuffer
+ * @old_fb: previous framebuffer
+ *
+ * This function implements a callback useable as the ->mode_set_base used
+ * required by the crtc helpers. The driver must provide the atomic plane helper
+ * functions for the primary plane.
+ *
+ * This is a transitional helper useful for converting drivers to the atomic
+ * interfaces.
+ */
+int drm_helper_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb)
+{
+ struct drm_plane_state *plane_state;
+ struct drm_plane *plane = crtc->primary;
+
+ if (plane->funcs->atomic_duplicate_state)
+ plane_state = plane->funcs->atomic_duplicate_state(plane);
+ else if (plane->state)
+ plane_state = kmemdup(plane->state, sizeof(*plane_state),
+ GFP_KERNEL);
+ else
+ plane_state = kzalloc(sizeof(*plane_state), GFP_KERNEL);
+ if (!plane_state)
+ return -ENOMEM;
+
+ plane_state->crtc = crtc;
+ plane_state->fb = crtc->primary->fb;
+ plane_state->crtc_x = 0;
+ plane_state->crtc_y = 0;
+ plane_state->crtc_h = crtc->mode.vdisplay;
+ plane_state->crtc_w = crtc->mode.hdisplay;
+ plane_state->src_x = x << 16;
+ plane_state->src_y = y << 16;
+ plane_state->src_h = crtc->mode.vdisplay << 16;
+ plane_state->src_w = crtc->mode.hdisplay << 16;
+
+ return drm_plane_helper_commit(plane, plane_state, old_fb);
+}
+EXPORT_SYMBOL(drm_helper_crtc_mode_set_base);
diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
index 45aa8c98e3fb..40ecb2c6e858 100644
--- a/drivers/gpu/drm/drm_plane_helper.c
+++ b/drivers/gpu/drm/drm_plane_helper.c
@@ -370,9 +370,9 @@ int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
}
EXPORT_SYMBOL(drm_crtc_init);
-static int
-plane_commit(struct drm_plane *plane, struct drm_plane_state *plane_state,
- struct drm_framebuffer *old_fb)
+int drm_plane_helper_commit(struct drm_plane *plane,
+ struct drm_plane_state *plane_state,
+ struct drm_framebuffer *old_fb)
{
struct drm_plane_helper_funcs *plane_funcs;
struct drm_crtc *crtc[2];
@@ -497,7 +497,7 @@ int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
plane_state->src_h = src_h;
plane_state->src_w = src_w;
- return plane_commit(plane, plane_state, plane->fb);
+ return drm_plane_helper_commit(plane, plane_state, plane->fb);
}
EXPORT_SYMBOL(drm_plane_helper_update);
@@ -536,6 +536,6 @@ int drm_plane_helper_disable(struct drm_plane *plane)
plane_state->crtc = NULL;
plane_state->fb = NULL;
- return plane_commit(plane, plane_state, plane->fb);
+ return drm_plane_helper_commit(plane, plane_state, plane->fb);
}
EXPORT_SYMBOL(drm_plane_helper_disable);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index d0068b7af678..77ff8992a3b7 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -230,6 +230,7 @@ struct drm_atomic_state;
* struct drm_crtc_state - mutable crtc state
* @enable: whether the CRTC should be enabled, gates all other state
* @planes_changed: for use by helpers and drivers when computing state updates
+ * @adjusted_mode: for use by helpers and drivers to compute adjusted mode timings
* @mode: current mode timings
* @event: optional pointer to a DRM event to signal upon completion of the
* state update
@@ -241,6 +242,9 @@ struct drm_crtc_state {
/* computed state bits used by helpers and drivers */
bool planes_changed : 1;
+ /* adjusted_mode: for use by helpers and drivers */
+ struct drm_display_mode adjusted_mode;
+
struct drm_display_mode mode;
struct drm_pending_vblank_event *event;
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index adec48b27aa5..7adbb65ea8ae 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -68,6 +68,7 @@ struct drm_crtc_helper_funcs {
int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode, int x, int y,
struct drm_framebuffer *old_fb);
+ void (*mode_set_nofb)(struct drm_crtc *crtc);
/* Move the crtc on the current fb to the given position *optional* */
int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
@@ -167,6 +168,12 @@ static inline void drm_connector_helper_add(struct drm_connector *connector,
extern void drm_helper_resume_force_mode(struct drm_device *dev);
+int drm_helper_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode, int x, int y,
+ struct drm_framebuffer *old_fb);
+int drm_helper_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
+ struct drm_framebuffer *old_fb);
+
/* drm_probe_helper.c */
extern int drm_helper_probe_single_connector_modes(struct drm_connector
*connector, uint32_t maxX,
diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h
index 8a0709704af0..62acb3c940b4 100644
--- a/include/drm/drm_plane_helper.h
+++ b/include/drm/drm_plane_helper.h
@@ -102,4 +102,8 @@ int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
uint32_t src_w, uint32_t src_h);
int drm_plane_helper_disable(struct drm_plane *plane);
+/* For use by drm_crtc_helper.c */
+int drm_plane_helper_commit(struct drm_plane *plane,
+ struct drm_plane_state *plane_state,
+ struct drm_framebuffer *old_fb);
#endif
--
2.1.1
More information about the Intel-gfx
mailing list