[Intel-gfx] [PATCH 01/28] drm/i915/skl: Read the Memory Latency Values for WM computation

Daniel Vetter daniel at ffwll.ch
Wed Nov 5 11:25:51 CET 2014


On Tue, Nov 04, 2014 at 05:06:38PM +0000, Damien Lespiau wrote:
> From: Pradeep Bhat <pradeep.bhat at intel.com>
> 
> This patch reads the memory latency values for all the 8 levels for
> SKL. These values are needed for the Watermark computation.
> 
> v2: Incorporated the review comments from Damien on register
>     indentation.
> 
> v3: Updated the code to use the sandybridge_pcode_read for reading
>     memory latencies for GEN9.
> 
> v4: Don't put gen 9 in the middle of an ordered list of ifs
>     (Damien)
> 
> v5: take the rps.hw_lock around sandybridge_pcode_read() (Damien)
> 
> v6: Use gen >= 9 in the pcode_read() function for data1.
>     Move the defines near the gen6 ones and prefix them with PCODE.
>     Remove unused timeout define (the pcode_read() code has a larger
>     timeout already).
> 
> Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Pradeep Bhat <pradeep.bhat at intel.com>
> Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_drv.h |  6 ++++
>  drivers/gpu/drm/i915/i915_reg.h |  7 ++++
>  drivers/gpu/drm/i915/intel_pm.c | 76 +++++++++++++++++++++++++++++++++++++----
>  3 files changed, 83 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 54691bc..05fcbe5 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1678,6 +1678,12 @@ struct drm_i915_private {
>  		uint16_t spr_latency[5];
>  		/* cursor */
>  		uint16_t cur_latency[5];
> +		/*
> +		 * Raw watermark memory latency values
> +		 * for SKL for all 8 levels
> +		 * in 1us units.
> +		 */
> +		uint16_t skl_latency[8];
>  
>  		/* current hardware state */
>  		struct ilk_wm_values hw;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index f32c624..3f469c8 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -5957,6 +5957,13 @@ enum punit_power_well {
>  #define   GEN6_PCODE_FREQ_IA_RATIO_SHIFT	8
>  #define   GEN6_PCODE_FREQ_RING_RATIO_SHIFT	16
>  
> +#define GEN9_PCODE_DATA1			0x13812C
> +#define   GEN9_PCODE_READ_MEM_LATENCY		0x6
> +#define   GEN9_MEM_LATENCY_LEVEL_MASK		0xFF
> +#define   GEN9_MEM_LATENCY_LEVEL_1_5_SHIFT	8
> +#define   GEN9_MEM_LATENCY_LEVEL_2_6_SHIFT	16
> +#define   GEN9_MEM_LATENCY_LEVEL_3_7_SHIFT	24
> +
>  #define GEN6_GT_CORE_STATUS		0x138060
>  #define   GEN6_CORE_CPD_STATE_MASK	(7<<4)
>  #define   GEN6_RCn_MASK			7
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 7a69eba..761c884 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2271,11 +2271,56 @@ hsw_compute_linetime_wm(struct drm_device *dev, struct drm_crtc *crtc)
>  	       PIPE_WM_LINETIME_TIME(linetime);
>  }
>  
> -static void intel_read_wm_latency(struct drm_device *dev, uint16_t wm[5])
> +static void intel_read_wm_latency(struct drm_device *dev, uint16_t wm[8])

Imo we should split this into an ilk_read_wm_latency and a
skl_read_wm_latency function. It's big and all the callers seem to only
care about one or the other. Care for a follow-up patch?
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch



More information about the Intel-gfx mailing list