[Intel-gfx] [PATCH 1/6] drm/i915: factor out compute_config from __intel_set_mode v3
Jesse Barnes
jbarnes at virtuousgeek.org
Wed Nov 5 23:26:06 CET 2014
This allows us to calculate the full pipe config before we do any mode
setting work.
v2:
- clarify comments about global vs. per-crtc mode set (Ander)
- clean up unnecessary pipe_config = NULL setting (Ander)
v3:
- fix pipe_config handling (alloc in compute_config, free in set_mode) (Jesse)
- fix arg order in set_mode (Jesse)
- fix failure path of set_config (Ander)
Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
drivers/gpu/drm/i915/intel_display.c | 105 ++++++++++++++++++++++++-----------
1 file changed, 74 insertions(+), 31 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a9df85f..a3ebab8 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10656,45 +10656,60 @@ static void update_scanline_offset(struct intel_crtc *crtc)
crtc->scanline_offset = 1;
}
+static struct intel_crtc_config *
+intel_modeset_compute_config(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_framebuffer *fb,
+ unsigned *modeset_pipes,
+ unsigned *prepare_pipes,
+ unsigned *disable_pipes)
+{
+ struct intel_crtc_config *pipe_config = NULL;
+
+ intel_modeset_affected_pipes(crtc, modeset_pipes,
+ prepare_pipes, disable_pipes);
+
+ if ((*modeset_pipes) == 0)
+ goto out;
+
+ /*
+ * Note this needs changes when we start tracking multiple modes
+ * and crtcs. At that point we'll need to compute the whole config
+ * (i.e. one pipe_config for each crtc) rather than just the one
+ * for this crtc.
+ */
+ pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
+ if (IS_ERR(pipe_config)) {
+ goto out;
+ }
+ intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
+ "[modeset]");
+ to_intel_crtc(crtc)->new_config = pipe_config;
+
+out:
+ return pipe_config;
+}
+
static int __intel_set_mode(struct drm_crtc *crtc,
struct drm_display_mode *mode,
- int x, int y, struct drm_framebuffer *fb)
+ int x, int y, struct drm_framebuffer *fb,
+ struct intel_crtc_config *pipe_config,
+ unsigned modeset_pipes,
+ unsigned prepare_pipes,
+ unsigned disable_pipes)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_display_mode *saved_mode;
- struct intel_crtc_config *pipe_config = NULL;
struct intel_crtc *intel_crtc;
- unsigned disable_pipes, prepare_pipes, modeset_pipes;
int ret = 0;
saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL);
if (!saved_mode)
return -ENOMEM;
- intel_modeset_affected_pipes(crtc, &modeset_pipes,
- &prepare_pipes, &disable_pipes);
-
*saved_mode = crtc->mode;
- /* Hack: Because we don't (yet) support global modeset on multiple
- * crtcs, we don't keep track of the new mode for more than one crtc.
- * Hence simply check whether any bit is set in modeset_pipes in all the
- * pieces of code that are not yet converted to deal with mutliple crtcs
- * changing their mode at the same time. */
- if (modeset_pipes) {
- pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
- if (IS_ERR(pipe_config)) {
- ret = PTR_ERR(pipe_config);
- pipe_config = NULL;
-
- goto out;
- }
- intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
- "[modeset]");
- to_intel_crtc(crtc)->new_config = pipe_config;
- }
-
/*
* See if the config requires any additional preparation, e.g.
* to adjust global state with pipes off. We need to do this
@@ -10719,6 +10734,10 @@ static int __intel_set_mode(struct drm_crtc *crtc,
/* crtc->mode is already used by the ->mode_set callbacks, hence we need
* to set it here already despite that we pass it down the callchain.
+ *
+ * Note we'll need to fix this up when we start tracking multiple
+ * pipes; here we assume a single modeset_pipe and only track the
+ * single crtc and mode.
*/
if (modeset_pipes) {
crtc->mode = *mode;
@@ -10787,19 +10806,23 @@ done:
if (ret && crtc->enabled)
crtc->mode = *saved_mode;
-out:
kfree(pipe_config);
kfree(saved_mode);
return ret;
}
-static int intel_set_mode(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- int x, int y, struct drm_framebuffer *fb)
+static int intel_set_mode_pipes(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ int x, int y, struct drm_framebuffer *fb,
+ struct intel_crtc_config *pipe_config,
+ unsigned modeset_pipes,
+ unsigned prepare_pipes,
+ unsigned disable_pipes)
{
int ret;
- ret = __intel_set_mode(crtc, mode, x, y, fb);
+ ret = __intel_set_mode(crtc, mode, x, y, fb, pipe_config, modeset_pipes,
+ prepare_pipes, disable_pipes);
if (ret == 0)
intel_modeset_check_state(crtc->dev);
@@ -10807,6 +10830,26 @@ static int intel_set_mode(struct drm_crtc *crtc,
return ret;
}
+static int intel_set_mode(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ int x, int y, struct drm_framebuffer *fb)
+{
+ struct intel_crtc_config *pipe_config;
+ unsigned modeset_pipes, prepare_pipes, disable_pipes;
+
+ pipe_config = intel_modeset_compute_config(crtc, mode, fb,
+ &modeset_pipes,
+ &prepare_pipes,
+ &disable_pipes);
+
+ if (IS_ERR(pipe_config))
+ return PTR_ERR(pipe_config);
+
+ return intel_set_mode_pipes(crtc, mode, x, y, fb, pipe_config,
+ modeset_pipes, prepare_pipes,
+ disable_pipes);
+}
+
void intel_crtc_restore_mode(struct drm_crtc *crtc)
{
intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->primary->fb);
@@ -13156,8 +13199,8 @@ void intel_modeset_setup_hw_state(struct drm_device *dev,
struct drm_crtc *crtc =
dev_priv->pipe_to_crtc_mapping[pipe];
- __intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
- crtc->primary->fb);
+ intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y,
+ crtc->primary->fb);
}
} else {
intel_modeset_update_staged_output_state(dev);
--
1.9.1
More information about the Intel-gfx
mailing list