[Intel-gfx] [PATCH 04/10] drm/i915/skl: Determine enabled PLL and its linkrate/pixel clock
Damien Lespiau
damien.lespiau at intel.com
Thu Nov 13 15:55:16 CET 2014
From: Satheeshakrishna M <satheeshakrishna.m at intel.com>
v2: Fixup compilation due to the removal of the intel_ddi_dpll_id enum.
And add a fixme about the abuse of pipe_config here.
v3: Rebase on top of the hsw_ddi_clock_get() rename (Damien)
v4: Modified as per review comments from Paulo
Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m at intel.com> (v1)
Signed-off-by: Damien Lespiau <damien.lespiau at intel.com> (v3)
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch> (v2)
Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 5 ++
drivers/gpu/drm/i915/intel_ddi.c | 115 ++++++++++++++++++++++++++++++++++++++-
2 files changed, 119 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index ba7815d..c443008 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6453,6 +6453,7 @@ enum punit_power_well {
#define DPLL_CTRL1_HDMI_MODE(id) (1<<((id)*6+5))
#define DPLL_CTRL1_SSC(id) (1<<((id)*6+4))
#define DPLL_CRTL1_LINK_RATE_MASK(id) (7<<((id)*6+1))
+#define DPLL_CRTL1_LINK_RATE_SHIFT(id) ((id)*6+1)
#define DPLL_CRTL1_LINK_RATE(linkrate, id) ((linkrate)<<((id)*6+1))
#define DPLL_CTRL1_OVERRIDE(id) (1<<((id)*6))
#define DPLL_CRTL1_LINK_RATE_2700 0
@@ -6466,6 +6467,7 @@ enum punit_power_well {
#define DPLL_CTRL2 0x6C05C
#define DPLL_CTRL2_DDI_CLK_OFF(port) (1<<(port+15))
#define DPLL_CTRL2_DDI_CLK_SEL_MASK(port) (3<<((port)*3+1))
+#define DPLL_CTRL2_DDI_CLK_SEL_SHIFT(port) ((port)*3+1)
#define DPLL_CTRL2_DDI_CLK_SEL(clk, port) (clk<<((port)*3+1))
#define DPLL_CTRL2_DDI_SEL_OVERRIDE(port) (1<<((port)*3))
@@ -6502,6 +6504,9 @@ enum punit_power_well {
#define DPLL_CFGCR2_PDIV_7 (4<<2)
#define DPLL_CFGCR2_CENTRAL_FREQ_MASK (3)
+#define GET_CFG_CR1_REG(id) (DPLL1_CFGCR1 + (id - SKL_DPLL1) * 8)
+#define GET_CFG_CR2_REG(id) (DPLL1_CFGCR2 + (id - SKL_DPLL1) * 8)
+
/* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
* since on HSW we can't write to it using I915_WRITE. */
#define D_COMP_HSW (MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 01c4f70..b06b213 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -670,6 +670,115 @@ static int intel_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv,
return (refclk * n * 100) / (p * r);
}
+static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv,
+ uint32_t dpll)
+{
+ uint32_t cfgcr1_reg, cfgcr2_reg;
+ uint32_t cfgcr1_val, cfgcr2_val;
+ uint32_t p0, p1, p2, dco_freq;
+
+ cfgcr1_reg = GET_CFG_CR1_REG(dpll);
+ cfgcr2_reg = GET_CFG_CR2_REG(dpll);
+
+ cfgcr1_val = I915_READ(cfgcr1_reg);
+ cfgcr2_val = I915_READ(cfgcr2_reg);
+
+ p0 = cfgcr2_val & DPLL_CFGCR2_PDIV_MASK;
+ p2 = cfgcr2_val & DPLL_CFGCR2_KDIV_MASK;
+
+ if (cfgcr2_val & DPLL_CFGCR2_QDIV_MODE(1))
+ p1 = (cfgcr2_val & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8;
+ else
+ p1 = 1;
+
+
+ switch (p0) {
+ case DPLL_CFGCR2_PDIV_1:
+ p0 = 1;
+ break;
+ case DPLL_CFGCR2_PDIV_2:
+ p0 = 2;
+ break;
+ case DPLL_CFGCR2_PDIV_3:
+ p0 = 3;
+ break;
+ case DPLL_CFGCR2_PDIV_7:
+ p0 = 7;
+ break;
+ }
+
+ switch (p2) {
+ case DPLL_CFGCR2_KDIV_5:
+ p2 = 5;
+ break;
+ case DPLL_CFGCR2_KDIV_2:
+ p2 = 2;
+ break;
+ case DPLL_CFGCR2_KDIV_3:
+ p2 = 3;
+ break;
+ case DPLL_CFGCR2_KDIV_1:
+ p2 = 1;
+ break;
+ }
+
+ dco_freq = (cfgcr1_val & DPLL_CFGCR1_DCO_INTEGER_MASK) * 24 * 1000;
+
+ dco_freq += (((cfgcr1_val & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9) * 24 *
+ 1000) / 0x8000;
+
+ return dco_freq / (p0 * p1 * p2 * 5);
+}
+
+
+static void skl_ddi_clock_get(struct intel_encoder *encoder,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ enum port port = intel_ddi_get_encoder_port(encoder);
+ int link_clock = 0;
+ uint32_t dpll_ctl1, dpll;
+
+ /* FIXME: This should be tracked in the pipe config. */
+ dpll = I915_READ(DPLL_CTRL2);
+ dpll &= DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
+ dpll >>= DPLL_CTRL2_DDI_CLK_SEL_SHIFT(port);
+
+ dpll_ctl1 = I915_READ(DPLL_CTRL1);
+
+ if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(dpll)) {
+ link_clock = skl_calc_wrpll_link(dev_priv, dpll);
+ } else {
+ link_clock = dpll_ctl1 & DPLL_CRTL1_LINK_RATE_MASK(dpll);
+ link_clock >>= DPLL_CRTL1_LINK_RATE_SHIFT(dpll);
+
+ switch (link_clock) {
+ case DPLL_CRTL1_LINK_RATE_810:
+ link_clock = 81000;
+ break;
+ case DPLL_CRTL1_LINK_RATE_1350:
+ link_clock = 135000;
+ break;
+ case DPLL_CRTL1_LINK_RATE_2700:
+ link_clock = 270000;
+ break;
+ default:
+ WARN(1, "Unsupported link rate\n");
+ break;
+ }
+ link_clock *= 2;
+ }
+
+ pipe_config->port_clock = link_clock;
+
+ if (pipe_config->has_dp_encoder)
+ pipe_config->adjusted_mode.crtc_clock =
+ intel_dotclock_calculate(pipe_config->port_clock,
+ &pipe_config->dp_m_n);
+ else
+ pipe_config->adjusted_mode.crtc_clock = pipe_config->port_clock;
+}
+
static void hsw_ddi_clock_get(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
@@ -1533,6 +1642,7 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
u32 temp, flags = 0;
+ struct drm_device *dev = dev_priv->dev;
temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
if (temp & TRANS_DDI_PHSYNC)
@@ -1604,7 +1714,10 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp;
}
- hsw_ddi_clock_get(encoder, pipe_config);
+ if (INTEL_INFO(dev)->gen <= 8)
+ hsw_ddi_clock_get(encoder, pipe_config);
+ else
+ skl_ddi_clock_get(encoder, pipe_config);
}
static void intel_ddi_destroy(struct drm_encoder *encoder)
--
1.8.3.1
More information about the Intel-gfx
mailing list