[Intel-gfx] [PATCH 10/15] drm/i915: Add PSR registers for PSR VLV/CHV.

[R, Durgadoss]

>-----Original Message-----
>From: Vivi, Rodrigo
>Sent: Friday, November 14, 2014 10:23 PM
>To: intel-gfx at lists.freedesktop.org
>Cc: Vivi, Rodrigo; R, Durgadoss
>Subject: [PATCH 10/15] drm/i915: Add PSR registers for PSR VLV/CHV.
>
>Baytrail (Valleyview) and Braswell (Cherryview) uses a complete different
>implementation of PSR that we currently have supported for
>Haswell and Broadwell. So let's start by adding registers definitions.
>
>I usually don't like commit that adds just registers without using,
>but after I put all in one commit I realized that no one would want
>to take the AR to review it so I decided to split in order to make
>reviewer's life easier. Only last commit in this series will actually
>enable the PSR on intel enable panel path.
>
>But as it happens currently with HSW/BDW the plan is to let it
>disabled by default (protected by kernel parameter)
>while we are able to fully validate it.
>
>v2: Remove a unused bit definition that isn't used on vlv and
>    reserved on chv as pointed out by Durgadoss.
>
>Cc: Durgadoss R <durgadoss.r at intel.com>
>Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>

Reviewed-by: Durgadoss R <durgadoss.r at intel.com>

Thanks,
Durga

>---
> drivers/gpu/drm/i915/i915_reg.h | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
>diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>index 35cfc16..667a923 100644
>--- a/drivers/gpu/drm/i915/i915_reg.h
>+++ b/drivers/gpu/drm/i915/i915_reg.h
>@@ -2511,6 +2511,42 @@ enum punit_power_well {
> #define PIPESRC(trans) _TRANSCODER2(trans, _PIPEASRC)
> #define PIPE_MULT(trans) _TRANSCODER2(trans, _PIPE_MULT_A)
>
>+/* VLV eDP PSR registers */
>+#define _PSRCTLA				(VLV_DISPLAY_BASE + 0x60090)
>+#define _PSRCTLB				(VLV_DISPLAY_BASE + 0x61090)
>+#define  VLV_EDP_PSR_ENABLE			(1<<0)
>+#define  VLV_EDP_PSR_RESET			(1<<1)
>+#define  VLV_EDP_PSR_MODE_MASK			(7<<2)
>+#define  VLV_EDP_PSR_MODE_HW_TIMER		(1<<3)
>+#define  VLV_EDP_PSR_MODE_SW_TIMER		(1<<2)
>+#define  VLV_EDP_PSR_SINGLE_FRAME_UPDATE	(1<<7)
>+#define  VLV_EDP_PSR_ACTIVE_ENTRY		(1<<8)
>+#define  VLV_EDP_PSR_SRC_TRANSMITTER_STATE	(1<<9)
>+#define  VLV_EDP_PSR_DBL_FRAME			(1<<10)
>+#define  VLV_EDP_PSR_FRAME_COUNT_MASK		(0xff<<16)
>+#define  VLV_EDP_PSR_IDLE_FRAME_SHIFT		16
>+#define VLV_PSRCTL(pipe) _PIPE(pipe, _PSRCTLA, _PSRCTLB)
>+
>+#define _VSCSDPA			(VLV_DISPLAY_BASE + 0x600a0)
>+#define _VSCSDPB			(VLV_DISPLAY_BASE + 0x610a0)
>+#define  VLV_EDP_PSR_SDP_FREQ_MASK	(3<<30)
>+#define  VLV_EDP_PSR_SDP_FREQ_ONCE	(1<<31)
>+#define  VLV_EDP_PSR_SDP_FREQ_EVFRAME	(1<<30)
>+#define VLV_VSCSDP(pipe)	_PIPE(pipe, _VSCSDPA, _VSCSDPB)
>+
>+#define _PSRSTATA			(VLV_DISPLAY_BASE + 0x60094)
>+#define _PSRSTATB			(VLV_DISPLAY_BASE + 0x61094)
>+#define  VLV_EDP_PSR_LAST_STATE_MASK	(7<<3)
>+#define  VLV_EDP_PSR_CURR_STATE_MASK	7
>+#define  VLV_EDP_PSR_DISABLED		(0<<0)
>+#define  VLV_EDP_PSR_INACTIVE		(1<<0)
>+#define  VLV_EDP_PSR_IN_TRANS_TO_ACTIVE	(2<<0)
>+#define  VLV_EDP_PSR_ACTIVE_NORFB_UP	(3<<0)
>+#define  VLV_EDP_PSR_ACTIVE_SF_UPDATE	(4<<0)
>+#define  VLV_EDP_PSR_EXIT		(5<<0)
>+#define  VLV_EDP_PSR_IN_TRANS		(1<<7)
>+#define VLV_PSRSTAT(pipe) _PIPE(pipe, _PSRSTATA, _PSRSTATB)
>+
> /* HSW+ eDP PSR registers */
> #define EDP_PSR_BASE(dev)                       (IS_HASWELL(dev) ? 0x64800 : 0x6f800)
> #define EDP_PSR_CTL(dev)			(EDP_PSR_BASE(dev) + 0)
>--
>1.9.3