[Intel-gfx] [PATCH 11/15] drm/i915: PSR VLV/CHV: Introduce setup, enable and disable functions
R, Durgadoss
durgadoss.r at intel.com
Tue Nov 18 19:32:59 CET 2014
>-----Original Message-----
>From: Vivi, Rodrigo
>Sent: Friday, November 14, 2014 10:23 PM
>To: intel-gfx at lists.freedesktop.org
>Cc: Vivi, Rodrigo; R, Durgadoss
>Subject: [PATCH 11/15] drm/i915: PSR VLV/CHV: Introduce setup, enable and disable functions
>
>The biggest difference from HSW/BDW PSR here is that VLV enable_source
>function enables PSR but let it in Inactive state. So it might be called
>on early stage along with setup and enable_sink ones.
>
>v2: Rebase over intel_psr.c;
> Remove docs from static functions;
> Merge vlv_psr_active_on_pipe;
> Timeout for psr transition is 250us;
> Remove SRC_TRASMITTER_STATE;
With SRC_TRANSMITTER_STATE not set to 1
explicitly, if entry/exit works, I would like to know what DPCD
register 71h is reading in your panel ?
I would expect bit 0 of 71h to be 1.
Is it the case ? Can we check once ?
Thanks,
Durga
>
>Cc: Durgadoss R <durgadoss.r at intel.com>
>Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
>---
> drivers/gpu/drm/i915/intel_psr.c | 154 ++++++++++++++++++++++++++++++++-------
> 1 file changed, 129 insertions(+), 25 deletions(-)
>
>diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
>index c296a89..bdb28f2 100644
>--- a/drivers/gpu/drm/i915/intel_psr.c
>+++ b/drivers/gpu/drm/i915/intel_psr.c
>@@ -81,6 +81,17 @@ bool intel_psr_is_enabled(struct drm_device *dev)
> return (bool)dev_priv->psr.enabled;
> }
>
>+static bool vlv_is_psr_active_on_pipe(struct drm_device *dev, int pipe)
>+{
>+ struct drm_i915_private *dev_priv = dev->dev_private;
>+ uint32_t val;
>+
>+ val = I915_READ(VLV_PSRSTAT(pipe)) &
>+ VLV_EDP_PSR_CURR_STATE_MASK;
>+ return (val == VLV_EDP_PSR_ACTIVE_NORFB_UP) ||
>+ (val == VLV_EDP_PSR_ACTIVE_SF_UPDATE);
>+}
>+
> static void intel_psr_write_vsc(struct intel_dp *intel_dp,
> struct edp_vsc_psr *vsc_psr)
> {
>@@ -110,7 +121,23 @@ static void intel_psr_write_vsc(struct intel_dp *intel_dp,
> POSTING_READ(ctl_reg);
> }
>
>-static void intel_psr_setup_vsc(struct intel_dp *intel_dp)
>+static void vlv_psr_setup_vsc(struct intel_dp *intel_dp)
>+{
>+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
>+ struct drm_device *dev = intel_dig_port->base.base.dev;
>+ struct drm_i915_private *dev_priv = dev->dev_private;
>+ struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
>+ enum pipe pipe = to_intel_crtc(crtc)->pipe;
>+ uint32_t val;
>+
>+ /* VLV auto-generate VSC package as per EDP 1.3 spec, Table 3.10 */
>+ val = I915_READ(VLV_VSCSDP(pipe));
>+ val &= ~VLV_EDP_PSR_SDP_FREQ_MASK;
>+ val |= VLV_EDP_PSR_SDP_FREQ_EVFRAME;
>+ I915_WRITE(VLV_VSCSDP(pipe), val);
>+}
>+
>+static void hsw_psr_setup_vsc(struct intel_dp *intel_dp)
> {
> struct edp_vsc_psr psr_vsc;
>
>@@ -123,7 +150,13 @@ static void intel_psr_setup_vsc(struct intel_dp *intel_dp)
> intel_psr_write_vsc(intel_dp, &psr_vsc);
> }
>
>-static void intel_psr_enable_sink(struct intel_dp *intel_dp)
>+static void vlv_psr_enable_sink(struct intel_dp *intel_dp)
>+{
>+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
>+ DP_PSR_ENABLE);
>+}
>+
>+static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
> {
> struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> struct drm_device *dev = dig_port->base.base.dev;
>@@ -167,7 +200,21 @@ static void intel_psr_enable_sink(struct intel_dp *intel_dp)
> (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
> }
>
>-static void intel_psr_enable_source(struct intel_dp *intel_dp)
>+static void vlv_psr_enable_source(struct intel_dp *intel_dp)
>+{
>+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
>+ struct drm_device *dev = dig_port->base.base.dev;
>+ struct drm_i915_private *dev_priv = dev->dev_private;
>+ struct drm_crtc *crtc = dig_port->base.base.crtc;
>+ enum pipe pipe = to_intel_crtc(crtc)->pipe;
>+
>+ /* Transition from PSR_state 0 to PSR_state 1, i.e. PSR Inactive */
>+ I915_WRITE(VLV_PSRCTL(pipe),
>+ VLV_EDP_PSR_MODE_SW_TIMER |
>+ VLV_EDP_PSR_ENABLE);
>+}
>+
>+static void hsw_psr_enable_source(struct intel_dp *intel_dp)
> {
> struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> struct drm_device *dev = dig_port->base.base.dev;
>@@ -247,7 +294,7 @@ static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
> return true;
> }
>
>-static void intel_psr_do_enable(struct intel_dp *intel_dp)
>+static void intel_psr_activate(struct intel_dp *intel_dp)
> {
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> struct drm_device *dev = intel_dig_port->base.base.dev;
>@@ -257,9 +304,12 @@ static void intel_psr_do_enable(struct intel_dp *intel_dp)
> WARN_ON(dev_priv->psr.active);
> lockdep_assert_held(&dev_priv->psr.lock);
>
>- /* Enable/Re-enable PSR on the host */
>- intel_psr_enable_source(intel_dp);
>-
>+ /* Enable/Re-enable PSR on the host
>+ * On HSW+ after we enable PSR on source it will activate it
>+ * as soon as it match configure idle_frame count. So
>+ * we just actually enable it here on activation time.
>+ */
>+ hsw_psr_enable_source(intel_dp);
> dev_priv->psr.active = true;
> }
>
>@@ -296,37 +346,67 @@ void intel_psr_enable(struct intel_dp *intel_dp)
>
> dev_priv->psr.busy_frontbuffer_bits = 0;
>
>- intel_psr_setup_vsc(intel_dp);
>+ if (HAS_DDI(dev)) {
>+ hsw_psr_setup_vsc(intel_dp);
>
>- /* Avoid continuous PSR exit by masking memup and hpd */
>- I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
>- EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
>+ /* Avoid continuous PSR exit by masking memup and hpd */
>+ I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
>+ EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
>
>- /* Enable PSR on the panel */
>- intel_psr_enable_sink(intel_dp);
>+ /* Enable PSR on the panel */
>+ hsw_psr_enable_sink(intel_dp);
>+ } else {
>+ vlv_psr_setup_vsc(intel_dp);
>+
>+ /* Enable PSR on the panel */
>+ vlv_psr_enable_sink(intel_dp);
>+
>+ /* On HSW+ enable_source also means go to PSR entry/active
>+ * state as soon as idle_frame achieved and here would be
>+ * to soon. However on VLV enable_source just enable PSR
>+ * but let it on inactive state. So we might do this prior
>+ * to active transition, i.e. here.
>+ */
>+ vlv_psr_enable_source(intel_dp);
>+ }
>
> dev_priv->psr.enabled = intel_dp;
> unlock:
> mutex_unlock(&dev_priv->psr.lock);
> }
>
>-/**
>- * intel_psr_disable - Disable PSR
>- * @intel_dp: Intel DP
>- *
>- * This function needs to be called before disabling pipe.
>- */
>-void intel_psr_disable(struct intel_dp *intel_dp)
>+static void vlv_psr_disable(struct intel_dp *intel_dp)
> {
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> struct drm_device *dev = intel_dig_port->base.base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
>+ struct intel_crtc *intel_crtc =
>+ to_intel_crtc(intel_dig_port->base.base.crtc);
>+ uint32_t val;
>
>- mutex_lock(&dev_priv->psr.lock);
>- if (!dev_priv->psr.enabled) {
>- mutex_unlock(&dev_priv->psr.lock);
>- return;
>+ if (dev_priv->psr.active) {
>+ /* Put VLV PSR back to PSR_state 0 that is PSR Disabled. */
>+ if (wait_for((I915_READ(VLV_PSRSTAT(intel_crtc->pipe)) &
>+ VLV_EDP_PSR_IN_TRANS) == 0, 0.250))
>+ WARN(1, "PSR transition took longer than expected\n");
>+
>+ val = I915_READ(VLV_PSRCTL(intel_crtc->pipe));
>+ val &= ~VLV_EDP_PSR_ACTIVE_ENTRY;
>+ val &= ~VLV_EDP_PSR_ENABLE;
>+ val &= ~VLV_EDP_PSR_MODE_MASK;
>+ I915_WRITE(VLV_PSRCTL(intel_crtc->pipe), val);
>+
>+ dev_priv->psr.active = false;
>+ } else {
>+ WARN_ON(vlv_is_psr_active_on_pipe(dev, intel_crtc->pipe));
> }
>+}
>+
>+static void hsw_psr_disable(struct intel_dp *intel_dp)
>+{
>+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
>+ struct drm_device *dev = intel_dig_port->base.base.dev;
>+ struct drm_i915_private *dev_priv = dev->dev_private;
>
> if (dev_priv->psr.active) {
> I915_WRITE(EDP_PSR_CTL(dev),
>@@ -341,6 +421,30 @@ void intel_psr_disable(struct intel_dp *intel_dp)
> } else {
> WARN_ON(I915_READ(EDP_PSR_CTL(dev)) & EDP_PSR_ENABLE);
> }
>+}
>+
>+/**
>+ * intel_psr_disable - Disable PSR
>+ * @intel_dp: Intel DP
>+ *
>+ * This function needs to be called before disabling pipe.
>+ */
>+void intel_psr_disable(struct intel_dp *intel_dp)
>+{
>+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
>+ struct drm_device *dev = intel_dig_port->base.base.dev;
>+ struct drm_i915_private *dev_priv = dev->dev_private;
>+
>+ mutex_lock(&dev_priv->psr.lock);
>+ if (!dev_priv->psr.enabled) {
>+ mutex_unlock(&dev_priv->psr.lock);
>+ return;
>+ }
>+
>+ if (HAS_DDI(dev))
>+ hsw_psr_disable(intel_dp);
>+ else
>+ vlv_psr_disable(intel_dp);
>
> dev_priv->psr.enabled = NULL;
> mutex_unlock(&dev_priv->psr.lock);
>@@ -379,7 +483,7 @@ static void intel_psr_work(struct work_struct *work)
> if (dev_priv->psr.busy_frontbuffer_bits)
> goto unlock;
>
>- intel_psr_do_enable(intel_dp);
>+ intel_psr_activate(intel_dp);
> unlock:
> mutex_unlock(&dev_priv->psr.lock);
> }
>--
>1.9.3
More information about the Intel-gfx
mailing list