[Intel-gfx] [PATCH 6/9] drm/i915: Enable DSI PLL for both DSI0 and DSI1 in case of dual link

[Gaurav K Singh]

For Dual link MIPI Panels, dsipll clock for both DSI0 and DSI1 needs to be enabled.

v2: Address review comments by Jani
    - Added wait time for PLL to be locked.

Signed-off-by: Gaurav K Singh <gaurav.k.singh at intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar at intel.com>
---
 drivers/gpu/drm/i915/intel_dsi_pll.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c
index fa7a6ca..93d8e9a 100644
--- a/drivers/gpu/drm/i915/intel_dsi_pll.c
+++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
@@ -243,6 +243,9 @@ static void vlv_configure_dsi_pll(struct intel_encoder *encoder)
 
 	dsi_mnp.dsi_pll_ctrl |= DSI_PLL_CLK_GATE_DSI0_DSIPLL;
 
+	if (intel_dsi->dual_link)
+		dsi_mnp.dsi_pll_ctrl |= DSI_PLL_CLK_GATE_DSI1_DSIPLL;
+
 	DRM_DEBUG_KMS("dsi pll div %08x, ctrl %08x\n",
 		      dsi_mnp.dsi_pll_div, dsi_mnp.dsi_pll_ctrl);
 
@@ -269,12 +272,12 @@ void vlv_enable_dsi_pll(struct intel_encoder *encoder)
 	tmp |= DSI_PLL_VCO_EN;
 	vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, tmp);
 
-	mutex_unlock(&dev_priv->dpio_lock);
-
-	if (wait_for(I915_READ(PIPECONF(PIPE_A)) & PIPECONF_DSI_PLL_LOCKED, 20)) {
+	if (wait_for(vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL) &
+					DSI_PLL_LOCK, 20)) {
 		DRM_ERROR("DSI PLL lock failed\n");
 		return;
 	}
+	mutex_unlock(&dev_priv->dpio_lock);
 
 	DRM_DEBUG_KMS("DSI PLL locked\n");
 }
-- 
1.7.9.5