[Intel-gfx] [RFC 2/6] drm/i915: Define PPS setup functions

Vandana Kannan vandana.kannan at intel.com
Tue Oct 7 17:09:40 CEST 2014


Defining functions equivalent to intel_dp_panel_power_sequencer.
In the setup part, the differnce between vlv and other platforms is only
w.r.t registers. Other parts like reading VBT are common.

Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c |   1 +
 drivers/gpu/drm/i915/intel_dp.c      |  31 ++-----
 drivers/gpu/drm/i915/intel_drv.h     |   8 ++
 drivers/gpu/drm/i915/intel_panel.c   | 153 +++++++++++++++++++++++++++++++++++
 4 files changed, 169 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b8488a8..22529b9 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12632,6 +12632,7 @@ static void intel_init_display(struct drm_device *dev)
 	}
 
 	intel_panel_init_backlight_funcs(dev);
+	intel_panel_init_pps_funcs(dev);
 
 	mutex_init(&dev_priv->pps_mutex);
 }
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 9113497..861b634 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -322,7 +322,7 @@ static void pps_unlock(struct intel_dp *intel_dp)
 	intel_display_power_put(dev_priv, power_domain);
 }
 
-static enum pipe
+enum pipe
 vlv_power_sequencer_pipe(struct intel_dp *intel_dp)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
@@ -419,13 +419,12 @@ vlv_initial_pps_pipe(struct drm_i915_private *dev_priv,
 	return INVALID_PIPE;
 }
 
-static void
-vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp)
+void
+vlv_initial_power_sequencer_setup(struct intel_digital_port *intel_dig_port)
 {
-	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+	struct intel_dp *intel_dp = &intel_dig_port->dp;
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct edp_power_seq power_seq;
 	enum port port = intel_dig_port->port;
 
 	lockdep_assert_held(&dev_priv->pps_mutex);
@@ -452,10 +451,6 @@ vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp)
 
 	DRM_DEBUG_KMS("initial power sequencer for port %c: pipe %c\n",
 		      port_name(port), pipe_name(intel_dp->pps_pipe));
-
-	intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
-	intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
-						      &power_seq);
 }
 
 void vlv_power_sequencer_reset(struct drm_i915_private *dev_priv)
@@ -1366,7 +1361,7 @@ static void edp_wait_backlight_off(struct intel_dp *intel_dp)
  * is locked
  */
 
-static  u32 ironlake_get_pp_control(struct intel_dp *intel_dp)
+u32 ironlake_get_pp_control(struct intel_dp *intel_dp)
 {
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -5034,9 +5029,9 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 		return false;
 	}
 
-	/* We now know it's not a ghost, init power sequence regs. */
 	pps_lock(intel_dp);
-	intel_dp_init_panel_power_sequencer_registers(dev, intel_dp, power_seq);
+	intel_dp_init_panel_power_timestamps(intel_dp);
+	intel_panel_setup_panel_power_sequencer(intel_connector);
 	pps_unlock(intel_dp);
 
 	mutex_lock(&dev->mode_config.mutex);
@@ -5176,18 +5171,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		BUG();
 	}
 
-	if (is_edp(intel_dp)) {
-		pps_lock(intel_dp);
-		if (IS_VALLEYVIEW(dev)) {
-			vlv_initial_power_sequencer_setup(intel_dp);
-		} else {
-			intel_dp_init_panel_power_timestamps(intel_dp);
-			intel_dp_init_panel_power_sequencer(dev, intel_dp,
-							    &power_seq);
-		}
-		pps_unlock(intel_dp);
-	}
-
 	intel_dp_aux_init(intel_dp, intel_connector);
 
 	/* init MST on ports that can support it */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index ddf839d..8f4332e 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -989,7 +989,12 @@ void intel_dp_mst_suspend(struct drm_device *dev);
 void intel_dp_mst_resume(struct drm_device *dev);
 int intel_dp_max_link_bw(struct intel_dp *intel_dp);
 void intel_dp_hot_plug(struct intel_encoder *intel_encoder);
+enum pipe vlv_power_sequencer_pipe(struct intel_dp *intel_dp);
+void vlv_initial_power_sequencer_setup(
+				struct intel_digital_port *intel_dig_port);
 void vlv_power_sequencer_reset(struct drm_i915_private *dev_priv);
+u32 ironlake_get_pp_control(struct intel_dp *intel_dp);
+
 /* intel_dp_mst.c */
 int intel_dp_mst_encoder_init(struct intel_digital_port *intel_dig_port, int conn_id);
 void intel_dp_mst_encoder_cleanup(struct intel_digital_port *intel_dig_port);
@@ -1089,6 +1094,9 @@ extern struct drm_display_mode *intel_find_panel_downclock(
 				struct drm_device *dev,
 				struct drm_display_mode *fixed_mode,
 				struct drm_connector *connector);
+void intel_panel_setup_panel_power_sequencer(
+				struct intel_connector *connector);
+void intel_panel_init_pps_funcs(struct drm_device *dev);
 
 /* intel_pm.c */
 void intel_init_clock_gating(struct drm_device *dev);
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 543e0f1..cfb6e9d 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -1344,6 +1344,159 @@ void intel_panel_init_backlight_funcs(struct drm_device *dev)
 	}
 }
 
+
+static struct edp_power_seq pch_get_pps_registers(
+					struct intel_connector *connector,
+					u32 pp_ctrl_reg, u32 pp_on_reg,
+					u32 pp_off_reg, u32 pp_div_reg)
+{
+	struct drm_device *dev = connector->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_encoder *encoder = connector->base.encoder;
+	struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
+	struct edp_power_seq cur;
+	u32 pp_on, pp_off, pp_div, pp;
+
+	pp_on = I915_READ(pp_on_reg);
+	pp_off = I915_READ(pp_off_reg);
+	pp_div = I915_READ(pp_div_reg);
+
+	/* Workaround: Need to write PP_CONTROL with the unlock key as
+	 * the very first thing. */
+	pp = ironlake_get_pp_control(&intel_dig_port->dp);
+	I915_WRITE(pp_ctrl_reg, pp);
+
+	/* Pull timing values out of registers */
+	cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
+		PANEL_POWER_UP_DELAY_SHIFT;
+
+	cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >>
+		PANEL_LIGHT_ON_DELAY_SHIFT;
+
+	cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >>
+		PANEL_LIGHT_OFF_DELAY_SHIFT;
+
+	cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >>
+		PANEL_POWER_DOWN_DELAY_SHIFT;
+
+	cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >>
+			PANEL_POWER_CYCLE_DELAY_SHIFT) * 1000;
+
+	DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
+			cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12);
+
+	return cur;
+}
+
+static struct edp_power_seq pch_setup_pps(struct intel_connector *connector)
+{
+	struct drm_device *dev = connector->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg;
+
+	lockdep_assert_held(&dev_priv->pps_mutex);
+
+	pp_ctrl_reg = PCH_PP_CONTROL;
+	pp_on_reg = PCH_PP_ON_DELAYS;
+	pp_off_reg = PCH_PP_OFF_DELAYS;
+	pp_div_reg = PCH_PP_DIVISOR;
+
+	return pch_get_pps_registers(connector, pp_ctrl_reg, pp_on_reg,
+				pp_off_reg, pp_div_reg);
+}
+
+static struct edp_power_seq vlv_setup_pps(struct intel_connector *connector)
+{
+	struct drm_device *dev = connector->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_encoder *encoder = connector->base.encoder;
+	struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
+	enum pipe pipe = vlv_power_sequencer_pipe(&intel_dig_port->dp);
+	int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg;
+
+	vlv_initial_power_sequencer_setup(intel_dig_port);
+
+	lockdep_assert_held(&dev_priv->pps_mutex);
+
+	pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
+	pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
+	pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe);
+	pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
+
+	return pch_get_pps_registers(connector, pp_ctrl_reg, pp_on_reg,
+				pp_off_reg, pp_div_reg);
+}
+
+void intel_panel_setup_panel_power_sequencer(struct intel_connector *connector)
+{
+	struct drm_device *dev = connector->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_panel *panel = &connector->panel;
+	struct edp_power_seq cur, spec, vbt, final;
+
+	/* Get chip specific register values */
+	cur = dev_priv->display.setup_panel_power_seq(connector);
+
+	vbt = dev_priv->vbt.edp_pps;
+
+	/* Upper limits from eDP 1.3 spec. Note that we use the clunky units of
+	 * our hw here, which are all in 100usec. */
+	spec.t1_t3 = 210 * 10;
+	spec.t8 = 50 * 10; /* no limit for t8, use t7 instead */
+	spec.t9 = 50 * 10; /* no limit for t9, make it symmetric with t8 */
+	spec.t10 = 500 * 10;
+	/* This one is special and actually in units of 100ms, but zero
+	 * based in the hw (so we need to add 100 ms). But the sw vbt
+	 * table multiplies it with 1000 to make it in units of 100usec,
+	 * too. */
+	spec.t11_t12 = (510 + 100) * 10;
+
+	DRM_DEBUG_KMS("vbt t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n",
+			vbt.t1_t3, vbt.t8, vbt.t9, vbt.t10, vbt.t11_t12);
+
+	/* Use the max of the register settings and vbt. If both are
+	 * unset, fall back to the spec limits. */
+#define assign_final(field)     final.field = (max(cur.field, vbt.field) == 0 ? \
+		spec.field : \
+		max(cur.field, vbt.field))
+	assign_final(t1_t3);
+	assign_final(t8);
+	assign_final(t9);
+	assign_final(t10);
+	assign_final(t11_t12);
+#undef assign_final
+
+#define get_delay(field)        (DIV_ROUND_UP(final.field, 10))
+	panel->pps.panel_power_up_delay = get_delay(t1_t3);
+	panel->pps.backlight_on_delay = get_delay(t8);
+	panel->pps.backlight_off_delay = get_delay(t9);
+	panel->pps.panel_power_down_delay = get_delay(t10);
+	panel->pps.panel_power_cycle_delay = get_delay(t11_t12);
+#undef get_delay
+
+	DRM_DEBUG_KMS("panel power up delay %d, power down delay %d,"
+			"power cycle delay %d\n",
+			panel->pps.panel_power_up_delay,
+			panel->pps.panel_power_down_delay,
+			panel->pps.panel_power_cycle_delay);
+
+	DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
+			panel->pps.backlight_on_delay,
+			panel->pps.backlight_off_delay);
+
+}
+
+/* Setup chip specific PPS functions */
+void intel_panel_init_pps_funcs(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (IS_VALLEYVIEW(dev))
+		dev_priv->display.setup_panel_power_seq = vlv_setup_pps;
+	else
+		dev_priv->display.setup_panel_power_seq = pch_setup_pps;
+}
+
 int intel_panel_init(struct intel_panel *panel,
 		     struct drm_display_mode *fixed_mode,
 		     struct drm_display_mode *downclock_mode)
-- 
2.0.1




More information about the Intel-gfx mailing list