[Intel-gfx] [PATCH 1/8] drm/i915/skl: Make 'end' of the DDB allocation entry exclusive

Damien Lespiau damien.lespiau at intel.com
Tue Oct 14 18:30:59 CEST 2014


Ville suggested that we should use the same semantics as C arrays to
reduce the number of those pesky +1/-1 in the allocation code.

This patch leaves the debugfs file as is, showing the internal DDB
allocation structure, not the values written in the registers.

Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h |  4 ++--
 drivers/gpu/drm/i915/intel_pm.c | 28 +++++++++++++++++++---------
 2 files changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 14be1dc..0320698 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1414,7 +1414,7 @@ struct ilk_wm_values {
 };
 
 struct skl_ddb_entry {
-	uint16_t start, end;	/* in number of blocks */
+	uint16_t start, end;	/* in number of blocks, 'end' is exclusive */
 };
 
 static inline uint16_t skl_ddb_entry_size(const struct skl_ddb_entry *entry)
@@ -1423,7 +1423,7 @@ static inline uint16_t skl_ddb_entry_size(const struct skl_ddb_entry *entry)
 	if (entry->end == 0)
 		return 0;
 
-	return entry->end - entry->start + 1;
+	return entry->end - entry->start;
 }
 
 static inline bool skl_ddb_entry_equal(const struct skl_ddb_entry *e1,
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 2a41ae8..016b54e 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3038,7 +3038,7 @@ skl_ddb_get_pipe_allocation_limits(struct drm_device *dev,
 
 	pipe_size = ddb_size / config->num_pipes_active;
 	alloc->start = nth_active_pipe * ddb_size / config->num_pipes_active;
-	alloc->end = alloc->start + pipe_size - 1;
+	alloc->end = alloc->start + pipe_size;
 }
 
 static unsigned int skl_cursor_allocation(const struct intel_wm_config *config)
@@ -3053,6 +3053,8 @@ static void skl_ddb_entry_init_from_hw(struct skl_ddb_entry *entry, u32 reg)
 {
 	entry->start = reg & 0x3ff;
 	entry->end = (reg >> 16) & 0x3ff;
+	if (entry->end)
+		entry->end += 1;
 }
 
 void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv,
@@ -3129,7 +3131,7 @@ skl_allocate_pipe_ddb(struct drm_crtc *crtc,
 	}
 
 	cursor_blocks = skl_cursor_allocation(config);
-	ddb->cursor[pipe].start = alloc.end - cursor_blocks + 1;
+	ddb->cursor[pipe].start = alloc.end - cursor_blocks;
 	ddb->cursor[pipe].end = alloc.end;
 
 	alloc_size -= cursor_blocks;
@@ -3163,7 +3165,7 @@ skl_allocate_pipe_ddb(struct drm_crtc *crtc,
 				       total_data_rate);
 
 		ddb->plane[pipe][plane].start = start;
-		ddb->plane[pipe][plane].end = start + plane_blocks - 1;
+		ddb->plane[pipe][plane].end = start + plane_blocks;
 
 		start += plane_blocks;
 	}
@@ -3467,6 +3469,15 @@ static void skl_compute_wm_results(struct drm_device *dev,
 	r->wm_linetime[pipe] = p_wm->linetime;
 }
 
+static void skl_ddb_entry_write(struct drm_i915_private *dev_priv, uint32_t reg,
+				const struct skl_ddb_entry *entry)
+{
+	if (entry->end)
+		I915_WRITE(reg, (entry->end - 1) << 16 | entry->start);
+	else
+		I915_WRITE(reg, 0);
+}
+
 static void skl_write_wm_values(struct drm_i915_private *dev_priv,
 				const struct skl_wm_values *new)
 {
@@ -3494,13 +3505,12 @@ static void skl_write_wm_values(struct drm_i915_private *dev_priv,
 			I915_WRITE(CUR_WM_TRANS(pipe), new->cursor_trans[pipe]);
 
 			for (i = 0; i < intel_num_planes(crtc); i++)
-				I915_WRITE(PLANE_BUF_CFG(pipe, i),
-					   new->ddb.plane[pipe][i].end << 16 |
-					   new->ddb.plane[pipe][i].start);
+				skl_ddb_entry_write(dev_priv,
+						    PLANE_BUF_CFG(pipe, i),
+						    &new->ddb.plane[pipe][i]);
 
-			I915_WRITE(CUR_BUF_CFG(pipe),
-				   new->ddb.cursor[pipe].end << 16 |
-				   new->ddb.cursor[pipe].start);
+			skl_ddb_entry_write(dev_priv, CUR_BUF_CFG(pipe),
+					    &new->ddb.cursor[pipe]);
 		}
 	}
 }
-- 
1.8.3.1




More information about the Intel-gfx mailing list