[Intel-gfx] [PATCH 1/6] drm/i915: factor out compute_config from __intel_set_mode

[Jesse Barnes]

This allows us to calculate the full pipe config before we do any mode
setting work.

Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_display.c | 93 +++++++++++++++++++++++++-----------
 1 file changed, 65 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6e5bc3c..d5f95e4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10910,45 +10910,62 @@ static void update_scanline_offset(struct intel_crtc *crtc)
 		crtc->scanline_offset = 1;
 }
 
+static int intel_modeset_compute_config(struct drm_crtc *crtc,
+					struct drm_display_mode *mode,
+					struct drm_framebuffer *fb,
+					unsigned *modeset_pipes,
+					unsigned *prepare_pipes,
+					unsigned *disable_pipes)
+{
+	struct intel_crtc_config *pipe_config = NULL;
+	int ret = 0;
+
+	intel_modeset_affected_pipes(crtc, modeset_pipes,
+				     prepare_pipes, disable_pipes);
+
+	if (!modeset_pipes)
+		goto out;
+
+	/* Hack: Because we don't (yet) support global modeset on multiple
+	 * crtcs, we don't keep track of the new mode for more than one crtc.
+	 * Hence simply check whether any bit is set in modeset_pipes in all the
+	 * pieces of code that are not yet converted to deal with mutliple crtcs
+	 * changing their mode at the same time. */
+	pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
+	if (IS_ERR(pipe_config)) {
+		ret = PTR_ERR(pipe_config);
+		pipe_config = NULL;
+
+		goto out;
+	}
+	intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
+			       "[modeset]");
+	to_intel_crtc(crtc)->new_config = pipe_config;
+
+out:
+	return ret;
+}
+
 static int __intel_set_mode(struct drm_crtc *crtc,
 			    struct drm_display_mode *mode,
-			    int x, int y, struct drm_framebuffer *fb)
+			    int x, int y, struct drm_framebuffer *fb,
+			    unsigned disable_pipes,
+			    unsigned prepare_pipes,
+			    unsigned modeset_pipes)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_display_mode *saved_mode;
 	struct intel_crtc_config *pipe_config = NULL;
 	struct intel_crtc *intel_crtc;
-	unsigned disable_pipes, prepare_pipes, modeset_pipes;
 	int ret = 0;
 
 	saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL);
 	if (!saved_mode)
 		return -ENOMEM;
 
-	intel_modeset_affected_pipes(crtc, &modeset_pipes,
-				     &prepare_pipes, &disable_pipes);
-
 	*saved_mode = crtc->mode;
 
-	/* Hack: Because we don't (yet) support global modeset on multiple
-	 * crtcs, we don't keep track of the new mode for more than one crtc.
-	 * Hence simply check whether any bit is set in modeset_pipes in all the
-	 * pieces of code that are not yet converted to deal with mutliple crtcs
-	 * changing their mode at the same time. */
-	if (modeset_pipes) {
-		pipe_config = intel_modeset_pipe_config(crtc, fb, mode);
-		if (IS_ERR(pipe_config)) {
-			ret = PTR_ERR(pipe_config);
-			pipe_config = NULL;
-
-			goto out;
-		}
-		intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,
-				       "[modeset]");
-		to_intel_crtc(crtc)->new_config = pipe_config;
-	}
-
 	/*
 	 * See if the config requires any additional preparation, e.g.
 	 * to adjust global state with pipes off.  We need to do this
@@ -11042,19 +11059,22 @@ done:
 	if (ret && crtc->enabled)
 		crtc->mode = *saved_mode;
 
-out:
 	kfree(pipe_config);
 	kfree(saved_mode);
 	return ret;
 }
 
-static int intel_set_mode(struct drm_crtc *crtc,
-			  struct drm_display_mode *mode,
-			  int x, int y, struct drm_framebuffer *fb)
+static int intel_set_mode_pipes(struct drm_crtc *crtc,
+				struct drm_display_mode *mode,
+				int x, int y, struct drm_framebuffer *fb,
+				unsigned modeset_pipes,
+				unsigned prepare_pipes,
+				unsigned disable_pipes)
 {
 	int ret;
 
-	ret = __intel_set_mode(crtc, mode, x, y, fb);
+	ret = __intel_set_mode(crtc, mode, x, y, fb, modeset_pipes,
+			       prepare_pipes, disable_pipes);
 
 	if (ret == 0)
 		intel_modeset_check_state(crtc->dev);
@@ -11062,6 +11082,23 @@ static int intel_set_mode(struct drm_crtc *crtc,
 	return ret;
 }
 
+static int intel_set_mode(struct drm_crtc *crtc,
+			  struct drm_display_mode *mode,
+			  int x, int y, struct drm_framebuffer *fb)
+{
+	unsigned modeset_pipes, prepare_pipes, disable_pipes;
+	int ret;
+
+	ret = intel_modeset_compute_config(crtc, mode, fb,
+					   &modeset_pipes, &prepare_pipes,
+					   &disable_pipes);
+	if (ret)
+		return ret;
+
+	return intel_set_mode_pipes(crtc, mode, x, y, fb, modeset_pipes,
+				    prepare_pipes, disable_pipes);
+}
+
 void intel_crtc_restore_mode(struct drm_crtc *crtc)
 {
 	intel_set_mode(crtc, &crtc->mode, crtc->x, crtc->y, crtc->primary->fb);
-- 
1.9.1