[Intel-gfx] [PATCH 1/3] drm: Pull drm_crtc.h into the kerneldoc template
Daniel Vetter
daniel at ffwll.ch
Fri Oct 31 18:23:11 CET 2014
On Fri, Oct 31, 2014 at 07:25:08AM -0400, Sean Paul wrote:
> On Wed, Oct 29, 2014 at 5:12 AM, Daniel Vetter <daniel.vetter at ffwll.ch> wrote:
> > While writing atomic docs I've noticed that I don't get any errors
> > for my screw-ups in drm_crtc.h. Fix this immediately.
> >
> > This just does the bare minimum to get starts, lots of stuff isn't
> > properly documented yet unfortunately.
> >
> > Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>
>
> Small spelling nit below, not sure if you want to fix it in this patch.
Fixed locally, I'll resend the entire pile with the atomic patches again.
>
> Reviewed-by: Sean Paul <seanpaul at chromium.org>
Thanks for your review.
-Daniel
>
>
> > ---
> > Documentation/DocBook/drm.tmpl | 4 ++++
> > include/drm/drm_crtc.h | 26 +++++++++++++-------------
> > 2 files changed, 17 insertions(+), 13 deletions(-)
> >
> > diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
> > index be35bc328b77..89829ae58e97 100644
> > --- a/Documentation/DocBook/drm.tmpl
> > +++ b/Documentation/DocBook/drm.tmpl
> > @@ -1827,6 +1827,10 @@ void intel_crt_init(struct drm_device *dev)
> > !Edrivers/gpu/drm/drm_crtc.c
> > </sect2>
> > <sect2>
> > + <title>KMS Data Structures</title>
> > +!Iinclude/drm/drm_crtc.h
> > + </sect2>
> > + <sect2>
> > <title>KMS Locking</title>
> > !Pdrivers/gpu/drm/drm_modeset_lock.c kms locking
> > !Iinclude/drm/drm_modeset_lock.h
> > diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> > index 44c57d2a64ec..21a15850a4d5 100644
> > --- a/include/drm/drm_crtc.h
> > +++ b/include/drm/drm_crtc.h
> > @@ -142,7 +142,7 @@ struct drm_framebuffer_funcs {
> > int (*create_handle)(struct drm_framebuffer *fb,
> > struct drm_file *file_priv,
> > unsigned int *handle);
> > - /**
> > + /*
> > * Optinal callback for the dirty fb ioctl.
>
> Couldn't hurt to add an extra 'o' here while you're at it.
>
> > *
> > * Userspace can notify the driver via this callback
> > @@ -226,7 +226,7 @@ struct drm_plane;
> > struct drm_bridge;
> >
> > /**
> > - * drm_crtc_funcs - control CRTCs for a given device
> > + * struct drm_crtc_funcs - control CRTCs for a given device
> > * @save: save CRTC state
> > * @restore: restore CRTC state
> > * @reset: reset CRTC after state has been invalidated (e.g. resume)
> > @@ -290,7 +290,7 @@ struct drm_crtc_funcs {
> > };
> >
> > /**
> > - * drm_crtc - central CRTC control structure
> > + * struct drm_crtc - central CRTC control structure
> > * @dev: parent DRM device
> > * @head: list management
> > * @mutex: per-CRTC locking
> > @@ -322,7 +322,7 @@ struct drm_crtc {
> > struct device_node *port;
> > struct list_head head;
> >
> > - /**
> > + /*
> > * crtc mutex
> > *
> > * This provides a read lock for the overall crtc state (mode, dpms
> > @@ -377,7 +377,7 @@ struct drm_crtc {
> >
> >
> > /**
> > - * drm_connector_funcs - control connectors on a given device
> > + * struct drm_connector_funcs - control connectors on a given device
> > * @dpms: set power state (see drm_crtc_funcs above)
> > * @save: save connector state
> > * @restore: restore connector state
> > @@ -414,7 +414,7 @@ struct drm_connector_funcs {
> > };
> >
> > /**
> > - * drm_encoder_funcs - encoder controls
> > + * struct drm_encoder_funcs - encoder controls
> > * @reset: reset state (e.g. at init or resume time)
> > * @destroy: cleanup and free associated data
> > *
> > @@ -428,7 +428,7 @@ struct drm_encoder_funcs {
> > #define DRM_CONNECTOR_MAX_ENCODER 3
> >
> > /**
> > - * drm_encoder - central DRM encoder structure
> > + * struct drm_encoder - central DRM encoder structure
> > * @dev: parent DRM device
> > * @head: list management
> > * @base: base KMS object
> > @@ -472,7 +472,7 @@ struct drm_encoder {
> > #define MAX_ELD_BYTES 128
> >
> > /**
> > - * drm_connector - central DRM connector control structure
> > + * struct drm_connector - central DRM connector control structure
> > * @dev: parent DRM device
> > * @kdev: kernel device for sysfs attributes
> > * @attr: sysfs attributes
> > @@ -566,7 +566,7 @@ struct drm_connector {
> > };
> >
> > /**
> > - * drm_plane_funcs - driver plane control functions
> > + * struct drm_plane_funcs - driver plane control functions
> > * @update_plane: update the plane configuration
> > * @disable_plane: shut down the plane
> > * @destroy: clean up plane resources
> > @@ -594,7 +594,7 @@ enum drm_plane_type {
> > };
> >
> > /**
> > - * drm_plane - central DRM plane control structure
> > + * struct drm_plane - central DRM plane control structure
> > * @dev: DRM device this plane belongs to
> > * @head: for list management
> > * @base: base mode object
> > @@ -632,7 +632,7 @@ struct drm_plane {
> > };
> >
> > /**
> > - * drm_bridge_funcs - drm_bridge control functions
> > + * struct drm_bridge_funcs - drm_bridge control functions
> > * @attach: Called during drm_bridge_attach
> > * @mode_fixup: Try to fixup (or reject entirely) proposed mode for this bridge
> > * @disable: Called right before encoder prepare, disables the bridge
> > @@ -658,7 +658,7 @@ struct drm_bridge_funcs {
> > };
> >
> > /**
> > - * drm_bridge - central DRM bridge control structure
> > + * struct drm_bridge - central DRM bridge control structure
> > * @dev: DRM device this bridge belongs to
> > * @head: list management
> > * @base: base mode object
> > @@ -679,7 +679,7 @@ struct drm_bridge {
> > };
> >
> > /**
> > - * drm_mode_set - new values for a CRTC config change
> > + * struct drm_mode_set - new values for a CRTC config change
> > * @head: list management
> > * @fb: framebuffer to use for new config
> > * @crtc: CRTC whose configuration we're about to change
> > --
> > 2.1.1
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Intel-gfx
mailing list