[Intel-gfx] [PATCH 10/14] drm/i915: Track which port is using which pipe's power sequencer
Antti Koskipää
antti.koskipaa at linux.intel.com
Mon Sep 1 13:19:51 CEST 2014
Reviewed-by: Antti Koskipaa <antti.koskipaa at linux.intel.com>
--
- Antti
On 08/18/2014 10:16 PM, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> VLV/CHV have a per-pipe panel power sequencer which locks onto the
> port once used. We need to keep track wich power sequencers are
> locked to which ports.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 185 ++++++++++++++++++++++++++++++++++-----
> drivers/gpu/drm/i915/intel_drv.h | 6 ++
> 2 files changed, 168 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 556e4de..4614e6e 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -294,28 +294,99 @@ static enum pipe
> vlv_power_sequencer_pipe(struct intel_dp *intel_dp)
> {
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> - struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
> struct drm_device *dev = intel_dig_port->base.base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - enum port port = intel_dig_port->port;
> - enum pipe pipe;
> + struct intel_encoder *encoder;
> + unsigned int pipes = (1 << PIPE_A) | (1 << PIPE_B);
> + struct edp_power_seq power_seq;
>
> lockdep_assert_held(&dev_priv->pps_mutex);
>
> - /* modeset should have pipe */
> - if (crtc)
> - return to_intel_crtc(crtc)->pipe;
> + if (intel_dp->pps_pipe != INVALID_PIPE)
> + return intel_dp->pps_pipe;
> +
> + /*
> + * We don't have power sequencer currently.
> + * Pick one that's not used by other ports.
> + */
> + list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
> + struct intel_dp *tmp;
> +
> + if (encoder->type != INTEL_OUTPUT_EDP)
> + continue;
> +
> + tmp = enc_to_intel_dp(&encoder->base);
> +
> + if (tmp->pps_pipe != INVALID_PIPE)
> + pipes &= ~(1 << tmp->pps_pipe);
> + }
> +
> + /*
> + * Didn't find one. This should not happen since there
> + * are two power sequencers and up to two eDP ports.
> + */
> + if (WARN_ON(pipes == 0))
> + return PIPE_A;
> +
> + intel_dp->pps_pipe = ffs(pipes) - 1;
> +
> + DRM_DEBUG_KMS("picked pipe %c power sequencer for port %c\n",
> + pipe_name(intel_dp->pps_pipe), port_name(intel_dig_port->port));
> +
> + /* init power sequencer on this pipe and port */
> + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
> + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
> + &power_seq);
> +
> + return intel_dp->pps_pipe;
> +}
> +
> +static enum pipe
> +vlv_initial_power_sequencer_pipe(struct drm_i915_private *dev_priv,
> + enum port port)
> +{
> + enum pipe pipe;
>
> - /* init time, try to find a pipe with this port selected */
> for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) {
> u32 port_sel = I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe)) &
> PANEL_PORT_SELECT_MASK;
> - if (port_sel == PANEL_PORT_SELECT_VLV(port))
> - return pipe;
> +
> + if (port_sel != PANEL_PORT_SELECT_VLV(port))
> + continue;
> +
> + return pipe;
> + }
> +
> + return INVALID_PIPE;
> +}
> +
> +static void
> +vlv_initial_power_sequencer_setup(struct intel_dp *intel_dp)
> +{
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + struct drm_device *dev = intel_dig_port->base.base.dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct edp_power_seq power_seq;
> + enum port port = intel_dig_port->port;
> +
> + lockdep_assert_held(&dev_priv->pps_mutex);
> +
> + /* try to find a pipe with this port selected */
> + intel_dp->pps_pipe = vlv_initial_power_sequencer_pipe(dev_priv, port);
> +
> + /* didn't find one? just let vlv_power_sequencer_pipe() pick one when needed */
> + if (intel_dp->pps_pipe == INVALID_PIPE) {
> + DRM_DEBUG_KMS("no initial power sequencer for port %c\n",
> + port_name(port));
> + return;
> }
>
> - /* shrug */
> - return PIPE_A;
> + DRM_DEBUG_KMS("initial power sequencer for port %c: pipe %c\n",
> + port_name(port), pipe_name(intel_dp->pps_pipe));
> +
> + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
> + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
> + &power_seq);
> }
>
> static u32 _pp_ctrl_reg(struct intel_dp *intel_dp)
> @@ -2209,6 +2280,76 @@ static void g4x_pre_enable_dp(struct intel_encoder *encoder)
> }
> }
>
> +static void vlv_steal_power_sequencer(struct drm_device *dev,
> + enum pipe pipe)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_encoder *encoder;
> +
> + lockdep_assert_held(&dev_priv->pps_mutex);
> +
> + list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
> + struct intel_dp *intel_dp;
> +
> + if (encoder->type != INTEL_OUTPUT_EDP)
> + continue;
> +
> + intel_dp = enc_to_intel_dp(&encoder->base);
> +
> + if (intel_dp->pps_pipe != pipe)
> + continue;
> +
> + DRM_DEBUG_KMS("stealing pipe %c power sequencer from port %c\n",
> + pipe_name(pipe),
> + port_name(dp_to_dig_port(intel_dp)->port));
> +
> + /* make sure vdd is off before we steal it */
> + edp_panel_vdd_off_sync(intel_dp);
> +
> + intel_dp->pps_pipe = INVALID_PIPE;
> + }
> +}
> +
> +static void vlv_init_panel_power_sequencer(struct intel_dp *intel_dp)
> +{
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + struct intel_encoder *encoder = &intel_dig_port->base;
> + struct drm_device *dev = encoder->base.dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
> + struct edp_power_seq power_seq;
> +
> + lockdep_assert_held(&dev_priv->pps_mutex);
> +
> + if (intel_dp->pps_pipe == crtc->pipe)
> + return;
> +
> + /*
> + * If another power sequencer was being used on this
> + * port previously make sure to turn off vdd there while
> + * we still have control of it.
> + */
> + if (intel_dp->pps_pipe != INVALID_PIPE)
> + edp_panel_vdd_off_sync(intel_dp);
> +
> + /*
> + * We may be stealing the power
> + * sequencer from another port.
> + */
> + vlv_steal_power_sequencer(dev, crtc->pipe);
> +
> + /* now it's all ours */
> + intel_dp->pps_pipe = crtc->pipe;
> +
> + DRM_DEBUG_KMS("initializing pipe %c power sequencer for port %c\n",
> + pipe_name(intel_dp->pps_pipe), port_name(intel_dig_port->port));
> +
> + /* init power sequencer on this pipe and port */
> + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
> + intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
> + &power_seq);
> +}
> +
> static void vlv_pre_enable_dp(struct intel_encoder *encoder)
> {
> struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
> @@ -2218,7 +2359,6 @@ static void vlv_pre_enable_dp(struct intel_encoder *encoder)
> struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> enum dpio_channel port = vlv_dport_to_channel(dport);
> int pipe = intel_crtc->pipe;
> - struct edp_power_seq power_seq;
> u32 val;
>
> mutex_lock(&dev_priv->dpio_lock);
> @@ -2237,11 +2377,8 @@ static void vlv_pre_enable_dp(struct intel_encoder *encoder)
> mutex_unlock(&dev_priv->dpio_lock);
>
> if (is_edp(intel_dp)) {
> - /* init power sequencer on this pipe and port */
> mutex_lock(&dev_priv->pps_mutex);
> - intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
> - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
> - &power_seq);
> + vlv_init_panel_power_sequencer(intel_dp);
> mutex_unlock(&dev_priv->pps_mutex);
> }
>
> @@ -2286,7 +2423,6 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)
> struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
> struct drm_device *dev = encoder->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - struct edp_power_seq power_seq;
> struct intel_crtc *intel_crtc =
> to_intel_crtc(encoder->base.crtc);
> enum dpio_channel ch = vlv_dport_to_channel(dport);
> @@ -2341,11 +2477,8 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)
> mutex_unlock(&dev_priv->dpio_lock);
>
> if (is_edp(intel_dp)) {
> - /* init power sequencer on this pipe and port */
> mutex_lock(&dev_priv->pps_mutex);
> - intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
> - intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
> - &power_seq);
> + vlv_init_panel_power_sequencer(intel_dp);
> mutex_unlock(&dev_priv->pps_mutex);
> }
>
> @@ -4691,6 +4824,8 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> struct edp_power_seq power_seq = { 0 };
> int type;
>
> + intel_dp->pps_pipe = INVALID_PIPE;
> +
> /* intel_dp vfuncs */
> if (IS_VALLEYVIEW(dev))
> intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider;
> @@ -4762,8 +4897,12 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
>
> if (is_edp(intel_dp)) {
> mutex_lock(&dev_priv->pps_mutex);
> - intel_dp_init_panel_power_timestamps(intel_dp);
> - intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
> + if (IS_VALLEYVIEW(dev)) {
> + vlv_initial_power_sequencer_setup(intel_dp);
> + } else {
> + intel_dp_init_panel_power_timestamps(intel_dp);
> + intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
> + }
> mutex_unlock(&dev_priv->pps_mutex);
> }
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index ad4e69b..d36299b 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -560,6 +560,12 @@ struct intel_dp {
>
> struct notifier_block edp_notifier;
>
> + /*
> + * Pipe whose power sequencer is currently locked into
> + * this port. Only relevant on VLV/CHV.
> + */
> + enum pipe pps_pipe;
> +
> bool use_tps3;
> bool can_mst; /* this port supports mst */
> bool is_mst;
>
More information about the Intel-gfx
mailing list