[Intel-gfx] [PATCH -v2 4/4] drm/i915: split intel_update_plane into check() and commit()

Gustavo Padovan gustavo at padovan.org
Tue Sep 2 21:23:47 CEST 2014


From: Gustavo Padovan <gustavo.padovan at collabora.co.uk>

Due to the upcoming atomic modesetting feature we need to separate
some update functions into a check step that can fail and a commit
step that should, ideally, never fail.

This commit splits intel_update_plane() and its commit part can still
fail due to the fb pinning procedure.

v2: use the new struct intel_plane_state to store information
between check and commit stages.

Signed-off-by: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
---
 drivers/gpu/drm/i915/intel_sprite.c | 236 ++++++++++++++++++++++--------------
 1 file changed, 146 insertions(+), 90 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 4cbe286..062eca2 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -845,57 +845,28 @@ static bool colorkey_enabled(struct intel_plane *intel_plane)
 }
 
 static int
-intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
-		   struct drm_framebuffer *fb, int crtc_x, int crtc_y,
-		   unsigned int crtc_w, unsigned int crtc_h,
-		   uint32_t src_x, uint32_t src_y,
-		   uint32_t src_w, uint32_t src_h)
+intel_check_sprite_plane(struct drm_plane *plane,
+			 struct intel_plane_state *pstate)
 {
-	struct drm_device *dev = plane->dev;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_crtc *intel_crtc = to_intel_crtc(pstate->crtc);
 	struct intel_plane *intel_plane = to_intel_plane(plane);
-	enum pipe pipe = intel_crtc->pipe;
+	struct drm_framebuffer *fb = pstate->fb;
 	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
 	struct drm_i915_gem_object *obj = intel_fb->obj;
-	struct drm_i915_gem_object *old_obj = intel_plane->obj;
-	int ret;
-	bool primary_enabled;
-	bool visible;
+	int crtc_x = pstate->crtc_x;
+	int crtc_y = pstate->crtc_y;
+	int crtc_w = pstate->crtc_w;
+	int crtc_h = pstate->crtc_h;
+	int src_x = pstate->src_x;
+	int src_y = pstate->src_y;
+	int src_w = pstate->src_w;
+	int src_h = pstate->src_h;
+	struct drm_rect *src = &pstate->src;
+	struct drm_rect *dst = &pstate->dst;
+	struct drm_rect *clip = &pstate->clip;
 	int hscale, vscale;
 	int max_scale, min_scale;
 	int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
-	struct drm_rect src = {
-		/* sample coordinates in 16.16 fixed point */
-		.x1 = src_x,
-		.x2 = src_x + src_w,
-		.y1 = src_y,
-		.y2 = src_y + src_h,
-	};
-	struct drm_rect dst = {
-		/* integer pixels */
-		.x1 = crtc_x,
-		.x2 = crtc_x + crtc_w,
-		.y1 = crtc_y,
-		.y2 = crtc_y + crtc_h,
-	};
-	const struct drm_rect clip = {
-		.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0,
-		.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0,
-	};
-	const struct {
-		int crtc_x, crtc_y;
-		unsigned int crtc_w, crtc_h;
-		uint32_t src_x, src_y, src_w, src_h;
-	} orig = {
-		.crtc_x = crtc_x,
-		.crtc_y = crtc_y,
-		.crtc_w = crtc_w,
-		.crtc_h = crtc_h,
-		.src_x = src_x,
-		.src_y = src_y,
-		.src_w = src_w,
-		.src_h = src_h,
-	};
 
 	/* Don't modify another pipe's plane */
 	if (intel_plane->pipe != intel_crtc->pipe) {
@@ -927,55 +898,55 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	max_scale = intel_plane->max_downscale << 16;
 	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
 
-	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
+	drm_rect_rotate(src, fb->width << 16, fb->height << 16,
 			intel_plane->rotation);
 
-	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
+	hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
 	BUG_ON(hscale < 0);
 
-	vscale = drm_rect_calc_vscale_relaxed(&src, &dst, min_scale, max_scale);
+	vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale);
 	BUG_ON(vscale < 0);
 
-	visible = drm_rect_clip_scaled(&src, &dst, &clip, hscale, vscale);
+	pstate->visible =  drm_rect_clip_scaled(src, dst, clip, hscale, vscale);
 
-	crtc_x = dst.x1;
-	crtc_y = dst.y1;
-	crtc_w = drm_rect_width(&dst);
-	crtc_h = drm_rect_height(&dst);
+	crtc_x = dst->x1;
+	crtc_y = dst->y1;
+	crtc_w = drm_rect_width(dst);
+	crtc_h = drm_rect_height(dst);
 
-	if (visible) {
+	if (pstate->visible) {
 		/* check again in case clipping clamped the results */
-		hscale = drm_rect_calc_hscale(&src, &dst, min_scale, max_scale);
+		hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
 		if (hscale < 0) {
 			DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n");
-			drm_rect_debug_print(&src, true);
-			drm_rect_debug_print(&dst, false);
+			drm_rect_debug_print(src, true);
+			drm_rect_debug_print(dst, false);
 
 			return hscale;
 		}
 
-		vscale = drm_rect_calc_vscale(&src, &dst, min_scale, max_scale);
+		vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
 		if (vscale < 0) {
 			DRM_DEBUG_KMS("Vertical scaling factor out of limits\n");
-			drm_rect_debug_print(&src, true);
-			drm_rect_debug_print(&dst, false);
+			drm_rect_debug_print(src, true);
+			drm_rect_debug_print(dst, false);
 
 			return vscale;
 		}
 
 		/* Make the source viewport size an exact multiple of the scaling factors. */
-		drm_rect_adjust_size(&src,
-				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
-				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
+		drm_rect_adjust_size(src,
+				     drm_rect_width(dst) * hscale - drm_rect_width(src),
+				     drm_rect_height(dst) * vscale - drm_rect_height(src));
 
-		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
+		drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
 				    intel_plane->rotation);
 
 		/* sanity check to make sure the src viewport wasn't enlarged */
-		WARN_ON(src.x1 < (int) src_x ||
-			src.y1 < (int) src_y ||
-			src.x2 > (int) (src_x + src_w) ||
-			src.y2 > (int) (src_y + src_h));
+		WARN_ON(src->x1 < (int) src_x ||
+			src->y1 < (int) src_y ||
+			src->x2 > (int) (src_x + src_w) ||
+			src->y2 > (int) (src_y + src_h));
 
 		/*
 		 * Hardware doesn't handle subpixel coordinates.
@@ -983,10 +954,10 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		 * increase the source viewport size, because that could
 		 * push the downscaling factor out of bounds.
 		 */
-		src_x = src.x1 >> 16;
-		src_w = drm_rect_width(&src) >> 16;
-		src_y = src.y1 >> 16;
-		src_h = drm_rect_height(&src) >> 16;
+		src_x = src->x1 >> 16;
+		src_w = drm_rect_width(src) >> 16;
+		src_y = src->y1 >> 16;
+		src_h = drm_rect_height(src) >> 16;
 
 		if (format_is_yuv(fb->pixel_format)) {
 			src_x &= ~1;
@@ -1000,12 +971,12 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 				crtc_w &= ~1;
 
 			if (crtc_w == 0)
-				visible = false;
+				pstate->visible = false;
 		}
 	}
 
 	/* Check size restrictions when scaling */
-	if (visible && (src_w != crtc_w || src_h != crtc_h)) {
+	if (pstate->visible && (src_w != crtc_w || src_h != crtc_h)) {
 		unsigned int width_bytes;
 
 		WARN_ON(!intel_plane->can_scale);
@@ -1013,10 +984,10 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		/* FIXME interlacing min height is 6 */
 
 		if (crtc_w < 3 || crtc_h < 3)
-			visible = false;
+			pstate->visible = false;
 
 		if (src_w < 3 || src_h < 3)
-			visible = false;
+			pstate->visible = false;
 
 		width_bytes = ((src_x * pixel_size) & 63) + src_w * pixel_size;
 
@@ -1027,17 +998,55 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		}
 	}
 
-	dst.x1 = crtc_x;
-	dst.x2 = crtc_x + crtc_w;
-	dst.y1 = crtc_y;
-	dst.y2 = crtc_y + crtc_h;
+	dst->x1 = crtc_x;
+	dst->x2 = crtc_x + crtc_w;
+	dst->y1 = crtc_y;
+	dst->y2 = crtc_y + crtc_h;
+
+	pstate->src_x = src_x;
+	pstate->src_y = src_y;
+	pstate->src_w = src_w;
+	pstate->src_h = src_h;
+	pstate->crtc_x = crtc_x;
+	pstate->crtc_y = crtc_y;
+	pstate->crtc_w = crtc_w;
+	pstate->crtc_x = crtc_h;
+
+	return 0;
+}
+
+static int
+intel_commit_sprite_plane(struct drm_plane *plane,
+			  struct intel_plane_state *pstate)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_crtc *crtc = pstate->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	enum pipe pipe = intel_crtc->pipe;
+	struct drm_framebuffer *fb = pstate->fb;
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+	struct drm_i915_gem_object *old_obj = intel_plane->obj;
+	int crtc_x = pstate->crtc_x;
+	int crtc_y = pstate->crtc_y;
+	int crtc_w = pstate->crtc_w;
+	int crtc_h = pstate->crtc_h;
+	int src_x = pstate->src_x;
+	int src_y = pstate->src_y;
+	int src_w = pstate->src_w;
+	int src_h = pstate->src_h;
+	struct drm_rect *dst = &pstate->dst;
+	struct drm_rect *clip = &pstate->clip;
+	int ret;
+	bool primary_enabled;
 
 	/*
 	 * If the sprite is completely covering the primary plane,
 	 * we can disable the primary and save power.
 	 */
-	primary_enabled = !drm_rect_equals(&dst, &clip) || colorkey_enabled(intel_plane);
-	WARN_ON(!primary_enabled && !visible && intel_crtc->active);
+	primary_enabled = !drm_rect_equals(dst, clip) || colorkey_enabled(intel_plane);
+	WARN_ON(!primary_enabled && !pstate->visible && intel_crtc->active);
 
 	mutex_lock(&dev->struct_mutex);
 
@@ -1055,14 +1064,14 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	if (ret)
 		return ret;
 
-	intel_plane->crtc_x = orig.crtc_x;
-	intel_plane->crtc_y = orig.crtc_y;
-	intel_plane->crtc_w = orig.crtc_w;
-	intel_plane->crtc_h = orig.crtc_h;
-	intel_plane->src_x = orig.src_x;
-	intel_plane->src_y = orig.src_y;
-	intel_plane->src_w = orig.src_w;
-	intel_plane->src_h = orig.src_h;
+	intel_plane->crtc_x = pstate->orig_dst.x1;
+	intel_plane->crtc_y = pstate->orig_dst.y1;
+	intel_plane->crtc_w = drm_rect_width(&pstate->orig_dst);
+	intel_plane->crtc_h = drm_rect_height(&pstate->orig_dst);
+	intel_plane->src_x = pstate->orig_src.x1;
+	intel_plane->src_y = pstate->orig_src.y1;
+	intel_plane->src_w = drm_rect_width(&pstate->orig_src);
+	intel_plane->src_h = drm_rect_height(&pstate->orig_src);
 	intel_plane->obj = obj;
 
 	if (intel_crtc->active) {
@@ -1076,7 +1085,7 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		if (primary_was_enabled && !primary_enabled)
 			intel_pre_disable_primary(crtc);
 
-		if (visible)
+		if (pstate->visible)
 			intel_plane->update_plane(plane, crtc, fb, obj,
 						  crtc_x, crtc_y, crtc_w, crtc_h,
 						  src_x, src_y, src_w, src_h);
@@ -1109,6 +1118,53 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 }
 
 static int
+intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
+		   struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+		   unsigned int crtc_w, unsigned int crtc_h,
+		   uint32_t src_x, uint32_t src_y,
+		   uint32_t src_w, uint32_t src_h)
+{
+	struct intel_plane_state pstate;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int ret;
+
+	pstate.crtc = crtc;
+	pstate.fb = fb;
+	pstate.crtc_x = crtc_x;
+	pstate.crtc_y = crtc_y;
+	pstate.crtc_w = crtc_w;
+	pstate.crtc_h = crtc_h;
+	pstate.src_x = src_x;
+	pstate.src_y = src_y;
+	pstate.src_w = src_w;
+	pstate.src_h = src_h;
+	pstate.src.x1 = src_x,
+	pstate.src.x2 = src_x + src_w,
+	pstate.src.y1 = src_y,
+	pstate.src.y2 = src_y + src_h,
+	pstate.dst.x1 = crtc_x,
+	pstate.dst.x2 = crtc_x + crtc_w,
+	pstate.dst.y1 = crtc_y,
+	pstate.dst.y2 = crtc_y + crtc_h,
+	pstate.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0,
+	pstate.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0,
+	pstate.orig_src.x1 = src_x,
+	pstate.orig_src.x2 = src_x + src_w,
+	pstate.orig_src.y1 = src_y,
+	pstate.orig_src.y2 = src_y + src_h,
+	pstate.orig_dst.x1 = crtc_x,
+	pstate.orig_dst.x2 = crtc_x + crtc_w,
+	pstate.orig_dst.y1 = crtc_y,
+	pstate.orig_dst.y2 = crtc_y + crtc_h,
+
+	ret = intel_check_sprite_plane(plane, &pstate);
+	if (ret)
+		return ret;
+
+	return intel_commit_sprite_plane(plane, &pstate);
+}
+
+static int
 intel_disable_plane(struct drm_plane *plane)
 {
 	struct drm_device *dev = plane->dev;
-- 
1.9.3




More information about the Intel-gfx mailing list