[Intel-gfx] [PATCH 32/89] drm/i915/skl: Adjust the display engine interrupts

[Daniel Vetter]

On Thu, Sep 04, 2014 at 12:26:58PM +0100, Damien Lespiau wrote:
> To accomodate the extra planes, the bit definitions were shuffled around
> a bit.
> 
> v2: Rebase on top of the for_each_pipe() change adding dev_priv as first
>     argument.
> 
> Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_irq.c | 37 ++++++++++++++++++++++++++++---------
>  drivers/gpu/drm/i915/i915_reg.h | 13 +++++++++++++
>  2 files changed, 41 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index c62a2e4..734b73e 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -2584,7 +2584,7 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
>  	}
>  
>  	for_each_pipe(dev_priv, pipe) {
> -		uint32_t pipe_iir;
> +		uint32_t pipe_iir, flip_done = 0, fault_errors = 0;
>  
>  		if (!(master_ctl & GEN8_DE_PIPE_IRQ(pipe)))
>  			continue;
> @@ -2593,10 +2593,16 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
>  		if (pipe_iir) {
>  			ret = IRQ_HANDLED;
>  			I915_WRITE(GEN8_DE_PIPE_IIR(pipe), pipe_iir);
> +
>  			if (pipe_iir & GEN8_PIPE_VBLANK)
>  				intel_pipe_handle_vblank(dev, pipe);
>  
> -			if (pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE) {
> +			if (IS_GEN9(dev))
> +				flip_done = pipe_iir & GEN9_PIPE_PLANE1_FLIP_DONE;
> +			else
> +				flip_done = pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE;
> +
> +			if (flip_done) {
>  				intel_prepare_page_flip(dev, pipe);
>  				intel_finish_page_flip_plane(dev, pipe);
>  			}
> @@ -2611,11 +2617,16 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
>  						  pipe_name(pipe));
>  			}
>  
> -			if (pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS) {
> +
> +			if (IS_GEN9(dev))
> +				fault_errors = pipe_iir & GEN9_DE_PIPE_IRQ_FAULT_ERRORS;
> +			else
> +				fault_errors = pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
> +
> +			if (fault_errors)
>  				DRM_ERROR("Fault errors on pipe %c\n: 0x%08x",
>  					  pipe_name(pipe),
>  					  pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS);
> -			}
>  		} else
>  			DRM_ERROR("The master control interrupt lied (DE PIPE)!\n");

gen8+ irq handling functions would _really_ benefit from a bit of function
extraction to prevent them from falling off the right edge of my screen
all the time ...

Just in case you have no idea what to do on a rainy day ;-)
-Daniel

>  	}
> @@ -3845,12 +3856,20 @@ static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv)
>  
>  static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
>  {
> -	uint32_t de_pipe_masked = GEN8_PIPE_PRIMARY_FLIP_DONE |
> -		GEN8_PIPE_CDCLK_CRC_DONE |
> -		GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
> -	uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
> -		GEN8_PIPE_FIFO_UNDERRUN;
> +	uint32_t de_pipe_masked = GEN8_PIPE_CDCLK_CRC_DONE;
> +	uint32_t de_pipe_enables;
>  	int pipe;
> +
> +	if (IS_GEN9(dev_priv))
> +		de_pipe_masked |= GEN9_PIPE_PLANE1_FLIP_DONE |
> +				  GEN9_DE_PIPE_IRQ_FAULT_ERRORS;
> +	else
> +		de_pipe_masked |= GEN8_PIPE_PRIMARY_FLIP_DONE |
> +				  GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
> +
> +	de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
> +					   GEN8_PIPE_FIFO_UNDERRUN;
> +
>  	dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked;
>  	dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked;
>  	dev_priv->de_irq_mask[PIPE_C] = ~de_pipe_masked;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index acd0a7b..5928a75 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4840,10 +4840,23 @@ enum punit_power_well {
>  #define  GEN8_PIPE_SCAN_LINE_EVENT	(1 << 2)
>  #define  GEN8_PIPE_VSYNC		(1 << 1)
>  #define  GEN8_PIPE_VBLANK		(1 << 0)
> +#define  GEN9_PIPE_CURSOR_FAULT		(1 << 11)
> +#define  GEN9_PIPE_PLANE3_FAULT		(1 << 9)
> +#define  GEN9_PIPE_PLANE2_FAULT		(1 << 8)
> +#define  GEN9_PIPE_PLANE1_FAULT		(1 << 7)
> +#define  GEN9_PIPE_PLANE3_FLIP_DONE	(1 << 5)
> +#define  GEN9_PIPE_PLANE2_FLIP_DONE	(1 << 4)
> +#define  GEN9_PIPE_PLANE1_FLIP_DONE	(1 << 3)
> +#define  GEN9_PIPE_PLANE_FLIP_DONE(p)	(1 << (3 + p))
>  #define GEN8_DE_PIPE_IRQ_FAULT_ERRORS \
>  	(GEN8_PIPE_CURSOR_FAULT | \
>  	 GEN8_PIPE_SPRITE_FAULT | \
>  	 GEN8_PIPE_PRIMARY_FAULT)
> +#define GEN9_DE_PIPE_IRQ_FAULT_ERRORS \
> +	(GEN9_PIPE_CURSOR_FAULT | \
> +	 GEN9_PIPE_PLANE3_FAULT | \
> +	 GEN9_PIPE_PLANE2_FAULT | \
> +	 GEN9_PIPE_PLANE1_FAULT)
>  
>  #define GEN8_DE_PORT_ISR 0x44440
>  #define GEN8_DE_PORT_IMR 0x44444
> -- 
> 1.8.3.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch