[Intel-gfx] [PATCH] drm/i915: De-magic the PSR AUX message

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Use pack_aux() to construct the PSR exit DPMS D0 AUX message,
and use the defines from dp_dp_helper.h to populate the message
contents.

Cc: Rodrigo Vivi <rodrigo.vivi at gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h |  2 --
 drivers/gpu/drm/i915/intel_dp.c | 16 +++++++++++-----
 2 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index e4d7607..fb60493 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2453,9 +2453,7 @@ enum punit_power_well {
 
 #define EDP_PSR_AUX_CTL(dev)			(EDP_PSR_BASE(dev) + 0x10)
 #define EDP_PSR_AUX_DATA1(dev)			(EDP_PSR_BASE(dev) + 0x14)
-#define   EDP_PSR_DPCD_COMMAND		0x80060000
 #define EDP_PSR_AUX_DATA2(dev)			(EDP_PSR_BASE(dev) + 0x18)
-#define   EDP_PSR_DPCD_NORMAL_OPERATION	(1<<24)
 #define EDP_PSR_AUX_DATA3(dev)			(EDP_PSR_BASE(dev) + 0x1c)
 #define EDP_PSR_AUX_DATA4(dev)			(EDP_PSR_BASE(dev) + 0x20)
 #define EDP_PSR_AUX_DATA5(dev)			(EDP_PSR_BASE(dev) + 0x24)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 81d7681..05bab25 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -225,7 +225,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
 }
 
 static uint32_t
-pack_aux(uint8_t *src, int src_bytes)
+pack_aux(const uint8_t *src, int src_bytes)
 {
 	int	i;
 	uint32_t v = 0;
@@ -1741,8 +1741,14 @@ static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t aux_clock_divider;
 	int precharge = 0x3;
-	int msg_size = 5;       /* Header(4) + Message(1) */
 	bool only_standby = false;
+	static const uint8_t aux_msg[] = {
+		[0] = DP_AUX_NATIVE_WRITE << 4,
+		[1] = DP_SET_POWER >> 8,
+		[2] = DP_SET_POWER & 0xff,
+		[3] = 1 - 1,
+		[4] = DP_SET_POWER_D0,
+	};
 
 	aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
 
@@ -1758,11 +1764,11 @@ static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp)
 				   DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
 
 	/* Setup AUX registers */
-	I915_WRITE(EDP_PSR_AUX_DATA1(dev), EDP_PSR_DPCD_COMMAND);
-	I915_WRITE(EDP_PSR_AUX_DATA2(dev), EDP_PSR_DPCD_NORMAL_OPERATION);
+	I915_WRITE(EDP_PSR_AUX_DATA1(dev), pack_aux(&aux_msg[0], 4));
+	I915_WRITE(EDP_PSR_AUX_DATA2(dev), pack_aux(&aux_msg[4], 1));
 	I915_WRITE(EDP_PSR_AUX_CTL(dev),
 		   DP_AUX_CH_CTL_TIME_OUT_400us |
-		   (msg_size << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+		   (5 << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
 		   (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
 		   (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
 }
-- 
1.8.5.5