[Intel-gfx] v3.17-rc4+: DRM warning
Daniel Vetter
daniel at ffwll.ch
Fri Sep 12 10:51:05 CEST 2014
On Fri, Sep 12, 2014 at 08:49:48AM +0100, Chris Clayton wrote:
> Hi,
>
> Firstly, please cc me on any reply because I'm not subscribed to LKML.
>
> I've just built and installed the current development kernel (v3.17-rc4-222-gc73f6fd)on a desktop machine and I'm
> getting a warning that I haven't seen before. A full dmesg is attached, but the warning is:
Please boot with drm.debug=0xe, reproduce the issue and attach the
complete dmesg (from boot-up to the backtrace).
Thanks, Daniel
>
> [ 23.131726] [drm:intel_pipe_config_compare] *ERROR* mismatch in limited_color_range (expected 1, found 0)
> [ 23.131727] ------------[ cut here ]------------
> [ 23.131770] WARNING: CPU: 3 PID: 149 at drivers/gpu/drm/i915/intel_display.c:10659 check_crtc_state+0x7e3/0xe50 [i915]()
> [ 23.131770] pipe state doesn't match!
> [ 23.131778] Modules linked in: firewire_ohci uhci_hcd(+) videobuf2_dma_sg videobuf2_memops videobuf2_core i915(+)
> ehci_pci rc_core v4l2_common videodev firewire_core ehci_hcd evdev cfbfillrect cfbimgblt cfbcopyarea drm_kms_helper
> [ 23.131780] CPU: 3 PID: 149 Comm: modprobe Not tainted 3.17.0-rc4+ #322
> [ 23.131781] Hardware name: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009
> [ 23.131783] 0000000000000009 ffffffff8145a016 ffff8802316eb3c0 ffffffff81040d0d
> [ 23.131784] ffff8802369e0060 ffff8802316eb410 0000000000000001 ffff8802369e0708
> [ 23.131786] ffff8802316f3338 ffffffff81040d77 ffffffffa0187529 ffffffff00000018
> [ 23.131786] Call Trace:
> [ 23.131791] [<ffffffff8145a016>] ? dump_stack+0x49/0x6a
> [ 23.131795] [<ffffffff81040d0d>] ? warn_slowpath_common+0x6d/0x90
> [ 23.131797] [<ffffffff81040d77>] ? warn_slowpath_fmt+0x47/0x50
> [ 23.131817] [<ffffffffa0123d03>] ? check_crtc_state+0x7e3/0xe50 [i915]
> [ 23.131838] [<ffffffffa0131c81>] ? intel_modeset_check_state+0x1f1/0x760 [i915]
> [ 23.131858] [<ffffffffa013227d>] ? intel_set_mode+0x1d/0x30 [i915]
> [ 23.131882] [<ffffffffa013334b>] ? intel_crtc_set_config+0xaab/0xe90 [i915]
> [ 23.131884] [<ffffffff811ec3a2>] ? idr_get_empty_slot+0x192/0x3b0
> [ 23.131886] [<ffffffff811eba9b>] ? get_from_free_list+0x3b/0x50
> [ 23.131889] [<ffffffff812a1b6d>] ? drm_mode_set_config_internal+0x5d/0xe0
> [ 23.131893] [<ffffffffa0007eec>] ? restore_fbdev_mode+0xac/0xd0 [drm_kms_helper]
> [ 23.131895] [<ffffffffa0007f29>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x19/0x30 [drm_kms_helper]
> [ 23.131898] [<ffffffffa0009f8d>] ? drm_fb_helper_set_par+0x1d/0x60 [drm_kms_helper]
> [ 23.131918] [<ffffffffa013db61>] ? intel_fbdev_set_par+0x11/0x60 [i915]
> [ 23.131920] [<ffffffff81227720>] ? fbcon_init+0x5e0/0x670
> [ 23.131923] [<ffffffff8127a66c>] ? visual_init+0xac/0x110
> [ 23.131924] [<ffffffff8127c930>] ? do_bind_con_driver+0x170/0x410
> [ 23.131926] [<ffffffff8127d153>] ? do_take_over_console+0xa3/0x190
> [ 23.131928] [<ffffffff81227803>] ? do_fbcon_takeover+0x53/0xb0
> [ 23.131930] [<ffffffff81059e35>] ? notifier_call_chain+0x45/0x70
> [ 23.131931] [<ffffffff8105a12c>] ? __blocking_notifier_call_chain+0x3c/0x60
> [ 23.131934] [<ffffffff8122f5d6>] ? register_framebuffer+0x1f6/0x320
> [ 23.131936] [<ffffffffa0009dcd>] ? drm_fb_helper_initial_config+0x36d/0x510 [drm_kms_helper]
> [ 23.131955] [<ffffffffa01164f7>] ? gen4_read32+0x37/0x40 [i915]
> [ 23.131979] [<ffffffffa0161f20>] ? i915_driver_load+0xfd0/0x1030 [i915]
> [ 23.131982] [<ffffffff8106ef8f>] ? __wake_up+0x2f/0x50
> [ 23.131985] [<ffffffff813ea188>] ? netlink_broadcast_filtered+0x1f8/0x370
> [ 23.131987] [<ffffffff811eded0>] ? kobj_ns_drop+0x60/0x60
> [ 23.131988] [<ffffffff811ee15c>] ? kobject_uevent_env+0xfc/0x400
> [ 23.131991] [<ffffffff812b3b0e>] ? get_device+0xe/0x20
> [ 23.131992] [<ffffffff8145708b>] ? klist_add_tail+0x1b/0x40
> [ 23.131994] [<ffffffff812b4ef2>] ? device_add+0x192/0x5b0
> [ 23.131997] [<ffffffff8129bf4c>] ? drm_dev_register+0x9c/0xf0
> [ 23.131998] [<ffffffff8129e533>] ? drm_get_pci_dev+0xc3/0x1e0
> [ 23.132001] [<ffffffff81213ee0>] ? pci_device_probe+0x60/0xb0
> [ 23.132014] [<ffffffff812b7a9a>] ? really_probe+0x5a/0x220
> [ 23.132015] [<ffffffff812b7d21>] ? __driver_attach+0x81/0x90
> [ 23.132017] [<ffffffff812b7ca0>] ? __device_attach+0x40/0x40
> [ 23.132018] [<ffffffff812b5e4b>] ? bus_for_each_dev+0x5b/0x90
> [ 23.132019] [<ffffffff812b7310>] ? bus_add_driver+0x160/0x210
> [ 23.132021] [<ffffffffa01a0000>] ? 0xffffffffa01a0000
> [ 23.132022] [<ffffffff812b8326>] ? driver_register+0x56/0xe0
> [ 23.132028] [<ffffffff810002b4>] ? do_one_initcall+0x84/0x1b0
> [ 23.132031] [<ffffffff8109f11f>] ? load_module+0x1b5f/0x2150
> [ 23.132033] [<ffffffff8109c090>] ? store_uevent+0x40/0x40
> [ 23.132035] [<ffffffff8109f7a1>] ? SyS_init_module+0x91/0xc0
> [ 23.132037] [<ffffffff81460a21>] ? sysenter_dispatch+0x7/0x1e
> [ 23.132038] ---[ end trace e6521cda3000b0ed ]---
> [ 23.132047] Console: switching to colour frame buffer device 240x67
> [ 23.164707] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 23.165971] i915 0000:00:02.0: registered panic notifier
> [ 23.172065] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
>
> I don't see this warning on my laptop, which also has intel-based graphics, so I guess it's related to the specific
> hardware on the desktop machine.
>
> Please let me know if I can help diagnose this warning or test any fix.
>
> Chris
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.17.0-rc4+ (chris at upstairs) (gcc version 4.9.2 20140910 (prerelease) (GCC) ) #322 SMP PREEMPT Fri Sep 12 07:43:31 BST 2014
> [ 0.000000] Command line: root=/dev/sda2 ro resume=/dev/sda11
> [ 0.000000] e820: BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
> [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bdcdffff] usable
> [ 0.000000] BIOS-e820: [mem 0x00000000bdce0000-0x00000000bdce2fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000bdce3000-0x00000000bdceffff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000bdcf0000-0x00000000bdcfffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] SMBIOS 2.4 present.
> [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009
> [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
> [ 0.000000] AGP: No AGP bridge found
> [ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CBFFF write-protect
> [ 0.000000] CC000-EFFFF uncachable
> [ 0.000000] F0000-FFFFF write-through
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask F00000000 write-back
> [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable
> [ 0.000000] 2 base 0BE000000 mask FFE000000 uncachable
> [ 0.000000] 3 base 0BDE00000 mask FFFE00000 uncachable
> [ 0.000000] 4 base 100000000 mask F00000000 write-back
> [ 0.000000] 5 base 200000000 mask FC0000000 write-back
> [ 0.000000] 6 base 0BDD00000 mask FFFF00000 uncachable
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] original variable MTRRs
> [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
> [ 0.000000] reg 1, base: 3GB, range: 1GB, type UC
> [ 0.000000] reg 2, base: 3040MB, range: 32MB, type UC
> [ 0.000000] reg 3, base: 3038MB, range: 2MB, type UC
> [ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
> [ 0.000000] reg 5, base: 8GB, range: 1GB, type WB
> [ 0.000000] reg 6, base: 3037MB, range: 1MB, type UC
> [ 0.000000] total RAM covered: 8157M
> [ 0.000000] Found optimal setting for mtrr clean up
> [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 7 lose cover RAM: 0G
> [ 0.000000] New variable MTRRs
> [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
> [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
> [ 0.000000] reg 2, base: 3037MB, range: 1MB, type UC
> [ 0.000000] reg 3, base: 3038MB, range: 2MB, type UC
> [ 0.000000] reg 4, base: 3040MB, range: 32MB, type UC
> [ 0.000000] reg 5, base: 4GB, range: 4GB, type WB
> [ 0.000000] reg 6, base: 8GB, range: 1GB, type WB
> [ 0.000000] e820: update [mem 0xbdd00000-0xffffffff] usable ==> reserved
> [ 0.000000] e820: last_pfn = 0xbdce0 max_arch_pfn = 0x400000000
> [ 0.000000] found SMP MP-table at [mem 0x000f5760-0x000f576f] mapped at [ffff8800000f5760]
> [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
> [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
> [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
> [ 0.000000] BRK [0x01793000, 0x01793fff] PGTABLE
> [ 0.000000] BRK [0x01794000, 0x01794fff] PGTABLE
> [ 0.000000] BRK [0x01795000, 0x01795fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
> [ 0.000000] [mem 0x23fe00000-0x23fffffff] page 2M
> [ 0.000000] BRK [0x01796000, 0x01796fff] PGTABLE
> [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
> [ 0.000000] [mem 0x23c000000-0x23fdfffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
> [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
> [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbdcdffff]
> [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
> [ 0.000000] [mem 0x00200000-0xbdbfffff] page 2M
> [ 0.000000] [mem 0xbdc00000-0xbdcdffff] page 4k
> [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
> [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
> [ 0.000000] BRK [0x01797000, 0x01797fff] PGTABLE
> [ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
> [ 0.000000] ACPI: Early table checksum verification disabled
> [ 0.000000] ACPI: RSDP 0x00000000000F7150 000014 (v00 GBT )
> [ 0.000000] ACPI: RSDT 0x00000000BDCE3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
> [ 0.000000] ACPI: FACP 0x00000000BDCE30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
> [ 0.000000] ACPI: DSDT 0x00000000BDCE3180 003DE7 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
> [ 0.000000] ACPI: FACS 0x00000000BDCE0000 000040
> [ 0.000000] ACPI: HPET 0x00000000BDCE70C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
> [ 0.000000] ACPI: MCFG 0x00000000BDCE7140 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
> [ 0.000000] ACPI: TAMG 0x00000000BDCE7180 006442 (v01 GBT GBT B0 5455312E BG?? 00020101)
> [ 0.000000] ACPI: APIC 0x00000000BDCE6FC0 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
> [ 0.000000] ACPI: SSDT 0x00000000BDCEDEF0 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
> [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
> [ 0.000000] Normal [mem 0x100000000-0x23fffffff]
> [ 0.000000] Movable zone start for each node
> [ 0.000000] Early memory node ranges
> [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
> [ 0.000000] node 0: [mem 0x00100000-0xbdcdffff]
> [ 0.000000] node 0: [mem 0x100000000-0x23fffffff]
> [ 0.000000] On node 0 totalpages: 2088062
> [ 0.000000] DMA zone: 64 pages used for memmap
> [ 0.000000] DMA zone: 21 pages reserved
> [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 12084 pages used for memmap
> [ 0.000000] DMA32 zone: 773344 pages, LIFO batch:31
> [ 0.000000] Normal zone: 20480 pages used for memmap
> [ 0.000000] Normal zone: 1310720 pages, LIFO batch:31
> [ 0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
> [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbdce0000-0xbdce2fff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbdce3000-0xbdceffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbdcf0000-0xbdcfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbdd00000-0xbdffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xcfffffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
> [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
> [ 0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
> [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88023fc00000 s74304 r8192 d24000 u524288
> [ 0.000000] pcpu-alloc: s74304 r8192 d24000 u524288 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055413
> [ 0.000000] Kernel command line: root=/dev/sda2 ro resume=/dev/sda11
> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
> [ 0.000000] AGP: Checking aperture...
> [ 0.000000] AGP: No AGP bridge found
> [ 0.000000] Memory: 8134384K/8352248K available (4493K kernel code, 423K rwdata, 1592K rodata, 776K init, 432K bss, 217864K reserved)
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] Preemptible hierarchical RCU implementation.
> [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
> [ 0.000000] NR_IRQS:4352 nr_irqs:456 0
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] hpet clockevent registered
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.000000] tsc: Detected 2499.813 MHz processor
> [ 0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.62 BogoMIPS (lpj=2499813)
> [ 0.001080] pid_max: default: 32768 minimum: 301
> [ 0.001120] ACPI: Core revision 20140724
> [ 0.003575] ACPI: All ACPI Tables successfully acquired
> [ 0.004023] Security Framework initialized
> [ 0.004068] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
> [ 0.004108] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
> [ 0.004437] CPU: Physical Processor ID: 0
> [ 0.004472] CPU: Processor Core ID: 0
> [ 0.005003] mce: CPU supports 6 MCE banks
> [ 0.005042] CPU0: Thermal monitoring enabled (TM2)
> [ 0.005083] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
> Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
> [ 0.005222] Freeing SMP alternatives memory: 16K (ffffffff81721000 - ffffffff81725000)
> [ 0.005677] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.015738] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz (fam: 06, model: 17, stepping: 0a)
> [ 0.016000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
> [ 0.016000] ... version: 2
> [ 0.016000] ... bit width: 40
> [ 0.016000] ... generic registers: 2
> [ 0.016000] ... value mask: 000000ffffffffff
> [ 0.016000] ... max period: 000000007fffffff
> [ 0.016000] ... fixed-purpose events: 3
> [ 0.016000] ... event mask: 0000000700000003
> [ 0.021058] x86: Booting SMP configuration:
> [ 0.021095] .... node #0, CPUs: #1 #2 #3
> [ 0.061010] x86: Booted up 1 node, 4 CPUs
> [ 0.061092] smpboot: Total of 4 processors activated (19998.50 BogoMIPS)
> [ 0.062089] devtmpfs: initialized
> [ 0.063077] PM: Registering ACPI NVS region [mem 0xbdce0000-0xbdce2fff] (12288 bytes)
> [ 0.063315] NET: Registered protocol family 16
> [ 0.063451] cpuidle: using governor ladder
> [ 0.063488] cpuidle: using governor menu
> [ 0.063544] ACPI: bus type PCI registered
> [ 0.063583] PCI: Using configuration type 1 for base access
> [ 0.067080] ACPI: Added _OSI(Module Device)
> [ 0.067116] ACPI: Added _OSI(Processor Device)
> [ 0.067152] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.067188] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.070151] ACPI: Dynamic OEM Table Load:
> [ 0.070228] ACPI: SSDT 0xFFFF880236A06800 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
> [ 0.070528] ACPI: Dynamic OEM Table Load:
> [ 0.070600] ACPI: SSDT 0xFFFF880236A0B000 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
> [ 0.071021] ACPI: Dynamic OEM Table Load:
> [ 0.071092] ACPI: SSDT 0xFFFF880236A0B200 000152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
> [ 0.071377] ACPI: Dynamic OEM Table Load:
> [ 0.071449] ACPI: SSDT 0xFFFF880236A0B400 000152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
> [ 0.071761] ACPI: Interpreter enabled
> [ 0.071799] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
> [ 0.071891] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
> [ 0.071991] ACPI: (supports S0 S3 S4 S5)
> [ 0.072001] ACPI: Using IOAPIC for interrupt routing
> [ 0.072056] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.074819] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.074861] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments]
> [ 0.074903] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
> [ 0.075021] PCI host bridge to bus 0000:00
> [ 0.075057] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.075095] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
> [ 0.075134] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
> [ 0.075173] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> [ 0.075224] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
> [ 0.075264] pci_bus 0000:00: root bus resource [mem 0xbdd00000-0xfebfffff]
> [ 0.075321] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
> [ 0.075396] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
> [ 0.075407] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
> [ 0.075412] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.075417] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe007]
> [ 0.075486] pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000
> [ 0.075494] pci 0000:00:02.1: reg 0x10: [mem 0xe1400000-0xe14fffff 64bit]
> [ 0.075591] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
> [ 0.075603] pci 0000:00:1b.0: reg 0x10: [mem 0xe1700000-0xe1703fff 64bit]
> [ 0.075648] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.075685] pci 0000:00:1b.0: System wakeup disabled by ACPI
> [ 0.075755] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
> [ 0.075799] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.075837] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [ 0.075907] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
> [ 0.075951] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.075988] pci 0000:00:1c.1: System wakeup disabled by ACPI
> [ 0.076036] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
> [ 0.076069] pci 0000:00:1d.0: reg 0x20: [io 0xe100-0xe11f]
> [ 0.076116] pci 0000:00:1d.0: System wakeup disabled by ACPI
> [ 0.076184] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
> [ 0.076221] pci 0000:00:1d.1: reg 0x20: [io 0xe200-0xe21f]
> [ 0.076272] pci 0000:00:1d.1: System wakeup disabled by ACPI
> [ 0.076340] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
> [ 0.076373] pci 0000:00:1d.2: reg 0x20: [io 0xe300-0xe31f]
> [ 0.076419] pci 0000:00:1d.2: System wakeup disabled by ACPI
> [ 0.076487] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
> [ 0.076520] pci 0000:00:1d.3: reg 0x20: [io 0xe400-0xe41f]
> [ 0.076566] pci 0000:00:1d.3: System wakeup disabled by ACPI
> [ 0.076638] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
> [ 0.076653] pci 0000:00:1d.7: reg 0x10: [mem 0xe1704000-0xe17043ff]
> [ 0.076738] pci 0000:00:1d.7: System wakeup disabled by ACPI
> [ 0.076807] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
> [ 0.076872] pci 0000:00:1e.0: System wakeup disabled by ACPI
> [ 0.076944] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
> [ 0.077041] pci 0000:00:1f.0: can't claim BAR 7 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415]
> [ 0.077105] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
> [ 0.077148] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
> [ 0.077190] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
> [ 0.077320] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018a
> [ 0.077331] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
> [ 0.077338] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
> [ 0.077344] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
> [ 0.077351] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
> [ 0.077357] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f]
> [ 0.077371] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
> [ 0.077411] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
> [ 0.077451] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
> [ 0.077492] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
> [ 0.078011] pci 0000:00:1f.2: PME# supported from D3hot
> [ 0.078073] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
> [ 0.078117] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
> [ 0.078231] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.078337] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
> [ 0.078350] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
> [ 0.078376] pci 0000:02:00.0: reg 0x18: [mem 0xe1510000-0xe1510fff 64bit pref]
> [ 0.078392] pci 0000:02:00.0: reg 0x20: [mem 0xe1500000-0xe150ffff 64bit pref]
> [ 0.078403] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
> [ 0.078437] pci 0000:02:00.0: supports D1 D2
> [ 0.078439] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.080016] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 0.080057] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
> [ 0.080061] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff]
> [ 0.080066] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref]
> [ 0.080108] pci 0000:03:01.0: [1131:7133] type 00 class 0x048000
> [ 0.080124] pci 0000:03:01.0: reg 0x10: [mem 0xe1605000-0xe16057ff]
> [ 0.080185] pci 0000:03:01.0: supports D1 D2
> [ 0.080237] pci 0000:03:07.0: [104c:8024] type 00 class 0x0c0010
> [ 0.080252] pci 0000:03:07.0: reg 0x10: [mem 0xe1604000-0xe16047ff]
> [ 0.080261] pci 0000:03:07.0: reg 0x14: [mem 0xe1600000-0xe1603fff]
> [ 0.080323] pci 0000:03:07.0: supports D1 D2
> [ 0.080325] pci 0000:03:07.0: PME# supported from D0 D1 D2 D3hot
> [ 0.080385] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
> [ 0.080429] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff]
> [ 0.080433] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
> [ 0.080435] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
> [ 0.080437] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> [ 0.080438] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
> [ 0.080440] pci 0000:00:1e.0: bridge window [mem 0xbdd00000-0xfebfffff] (subtractive decode)
> [ 0.080454] pci_bus 0000:00: on NUMA node 0
> [ 0.080796] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
> [ 0.081090] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
> [ 0.081414] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
> [ 0.081717] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
> [ 0.082038] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
> [ 0.082397] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
> [ 0.082737] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
> [ 0.083072] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
> [ 0.083428] ACPI: Enabled 2 GPEs in block 00 to 1F
> [ 0.083553] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.083553] vgaarb: loaded
> [ 0.083553] vgaarb: bridge control possible 0000:00:02.0
> [ 0.083553] SCSI subsystem initialized
> [ 0.083553] libata version 3.00 loaded.
> [ 0.083553] ACPI: bus type USB registered
> [ 0.083553] usbcore: registered new interface driver usbfs
> [ 0.083553] usbcore: registered new interface driver hub
> [ 0.084024] usbcore: registered new device driver usb
> [ 0.084108] Advanced Linux Sound Architecture Driver Initialized.
> [ 0.084166] PCI: Using ACPI for IRQ routing
> [ 0.084201] PCI: pci_cache_line_size set to 64 bytes
> [ 0.084248] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
> [ 0.084250] e820: reserve RAM buffer [mem 0xbdce0000-0xbfffffff]
> [ 0.084390] Switched to clocksource hpet
> [ 0.084501] pnp: PnP ACPI init
> [ 0.084624] system 00:00: [io 0x04d0-0x04d1] has been reserved
> [ 0.084663] system 00:00: [io 0x0290-0x029f] has been reserved
> [ 0.084702] system 00:00: [io 0x0800-0x087f] has been reserved
> [ 0.084740] system 00:00: [io 0x0290-0x0294] has been reserved
> [ 0.084779] system 00:00: [io 0x0880-0x088f] has been reserved
> [ 0.084819] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.084870] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.084870] pnp 00:02: [dma 2]
> [ 0.084870] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
> [ 0.084870] system 00:03: [io 0x0400-0x04cf] could not be reserved
> [ 0.084870] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.084939] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved
> [ 0.084980] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.085116] system 00:05: [mem 0x000cc600-0x000cffff] has been reserved
> [ 0.085157] system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved
> [ 0.085198] system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved
> [ 0.085238] system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved
> [ 0.085279] system 00:05: [mem 0xbdce0000-0xbdcfffff] could not be reserved
> [ 0.085319] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 0.085360] system 00:05: [mem 0x00100000-0xbdcdffff] could not be reserved
> [ 0.085401] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
> [ 0.085441] system 00:05: [mem 0xfed13000-0xfed1dfff] has been reserved
> [ 0.085481] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
> [ 0.085521] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 0.085561] system 00:05: [mem 0xffb00000-0xffb7ffff] has been reserved
> [ 0.085601] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved
> [ 0.085641] system 00:05: [mem 0x000e0000-0x000effff] has been reserved
> [ 0.085681] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.085688] pnp: PnP ACPI: found 6 devices
> [ 0.093806] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
> [ 0.093810] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
> [ 0.093812] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
> [ 0.093825] pci 0000:00:1f.0: BAR 7: [io 0x0400-0x047f] has bogus alignment
> [ 0.093867] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
> [ 0.093869] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
> [ 0.093871] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
> [ 0.093875] pci 0000:00:1c.0: BAR 8: assigned [mem 0xbdd00000-0xbdefffff]
> [ 0.093918] pci 0000:00:1c.0: BAR 9: assigned [mem 0xe1800000-0xe19fffff 64bit pref]
> [ 0.093961] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
> [ 0.094000] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [ 0.094041] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> [ 0.094082] pci 0000:00:1c.0: bridge window [mem 0xbdd00000-0xbdefffff]
> [ 0.094123] pci 0000:00:1c.0: bridge window [mem 0xe1800000-0xe19fffff 64bit pref]
> [ 0.094169] pci 0000:02:00.0: BAR 6: assigned [mem 0xe0000000-0xe000ffff pref]
> [ 0.094210] pci 0000:00:1c.1: PCI bridge to [bus 02]
> [ 0.094247] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
> [ 0.094288] pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe0ffffff]
> [ 0.094330] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff 64bit pref]
> [ 0.094374] pci 0000:00:1e.0: PCI bridge to [bus 03]
> [ 0.094413] pci 0000:00:1e.0: bridge window [mem 0xe1600000-0xe16fffff]
> [ 0.094458] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
> [ 0.094460] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
> [ 0.094462] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.094463] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
> [ 0.094465] pci_bus 0000:00: resource 8 [mem 0xbdd00000-0xfebfffff]
> [ 0.094467] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
> [ 0.094468] pci_bus 0000:01: resource 1 [mem 0xbdd00000-0xbdefffff]
> [ 0.094470] pci_bus 0000:01: resource 2 [mem 0xe1800000-0xe19fffff 64bit pref]
> [ 0.094471] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
> [ 0.094473] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe0ffffff]
> [ 0.094475] pci_bus 0000:02: resource 2 [mem 0xe1500000-0xe15fffff 64bit pref]
> [ 0.094476] pci_bus 0000:03: resource 1 [mem 0xe1600000-0xe16fffff]
> [ 0.094478] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
> [ 0.094479] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
> [ 0.094481] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
> [ 0.094483] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
> [ 0.094484] pci_bus 0000:03: resource 8 [mem 0xbdd00000-0xfebfffff]
> [ 0.094505] NET: Registered protocol family 2
> [ 0.094720] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.094899] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.095222] TCP: Hash tables configured (established 65536 bind 65536)
> [ 0.095299] TCP: reno registered
> [ 0.095335] UDP hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.095414] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> [ 0.095561] NET: Registered protocol family 1
> [ 0.095617] pci 0000:00:02.0: Boot video device
> [ 0.107100] PCI: CLS 32 bytes, default 64
> [ 0.107130] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.107172] software IO TLB [mem 0xb9ce0000-0xbdce0000] (64MB) mapped at [ffff8800b9ce0000-ffff8800bdcdffff]
> [ 0.107485] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
> [ 0.107536] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
> [ 0.107590] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
> [ 0.107640] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
> [ 0.107747] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
> [ 0.108028] futex hash table entries: 1024 (order: 4, 65536 bytes)
> [ 0.110410] fuse init (API version 7.23)
> [ 0.110547] msgmni has been set to 15887
> [ 0.111664] io scheduler noop registered
> [ 0.111754] io scheduler cfq registered (default)
> [ 0.112052] intel_idle: does not run on family 6 model 23
> [ 0.112103] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
> [ 0.112148] ACPI: Power Button [PWRB]
> [ 0.112237] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 0.112278] ACPI: Power Button [PWRF]
> [ 0.112359] tsc: Marking TSC unstable due to TSC halts in idle
> [ 0.112402] ACPI: acpi_idle registered with cpuidle
> [ 0.117586] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> [ 0.117885] Linux agpgart interface v0.103
> [ 0.117970] agpgart-intel 0000:00:00.0: Intel G41 Chipset
> [ 0.118035] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
> [ 0.118599] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
> [ 0.118773] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
> [ 0.118859] [drm] Initialized drm 1.1.0 20060810
> [ 0.118981] ata_piix 0000:00:1f.2: version 2.13
> [ 0.119091] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
> [ 0.119736] scsi host0: ata_piix
> [ 0.119929] scsi host1: ata_piix
> [ 0.119991] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
> [ 0.120045] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
> [ 0.120122] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 0.120191] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
> [ 0.120509] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90000028000, 6c:f0:49:14:96:87, XID 1c4000c0 IRQ 17
> [ 0.120568] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
> [ 0.120694] i8042: PNP: No PS/2 controller found. Probing ports directly.
> [ 0.121105] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 0.121159] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 0.121366] mousedev: PS/2 mouse device common for all mice
> [ 0.121661] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
> [ 0.121856] usbcore: registered new interface driver usbhid
> [ 0.121894] usbhid: USB HID core driver
> [ 0.122317] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 0.122357] TCP: cubic registered
> [ 0.122401] NET: Registered protocol family 15
> [ 0.122767] registered taskstats version 1
> [ 0.132495] sound hdaudioC0D2: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
> [ 0.132538] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 0.132578] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> [ 0.132616] sound hdaudioC0D2: mono: mono_out=0x0
> [ 0.132653] sound hdaudioC0D2: dig-out=0x1e/0x0
> [ 0.132689] sound hdaudioC0D2: inputs:
> [ 0.132724] sound hdaudioC0D2: Rear Mic=0x18
> [ 0.132760] sound hdaudioC0D2: Front Mic=0x19
> [ 0.132796] sound hdaudioC0D2: Line=0x1a
> [ 0.132831] sound hdaudioC0D2: CD=0x1c
> [ 0.132866] sound hdaudioC0D2: dig-in=0x1f
> [ 0.300199] ata2.01: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL03, max UDMA/100
> [ 0.303779] ata1.00: HPA detected: current 1953523055, native 1953525168
> [ 0.303824] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
> [ 0.303866] ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 0.303911] ata1.01: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.01, max UDMA/133
> [ 0.306175] ata2.01: configured for UDMA/100
> [ 0.307790] ata1.00: configured for UDMA/133
> [ 0.345120] ata1.01: configured for UDMA/133
> [ 0.350959] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5
> [ 0.351160] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
> [ 0.351199] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 0.360076] scsi 0:0:1:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.01 PQ: 0 ANSI: 5
> [ 0.360105] sd 0:0:0:0: [sda] Write Protect is off
> [ 0.360108] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 0.360140] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 0.421356] sr 0:0:1:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 0.421414] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 0.421569] sr 0:0:1:0: Attached scsi CD-ROM sr0
> [ 0.421615] sr 0:0:1:0: Attached scsi generic sg1 type 5
> [ 0.425119] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL03 PQ: 0 ANSI: 5
> [ 0.454829] sr 1:0:1:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 0.455076] sr 1:0:1:0: Attached scsi CD-ROM sr1
> [ 0.455146] sr 1:0:1:0: Attached scsi generic sg2 type 5
> [ 0.544967] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
> [ 0.545605] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 0.545844] ALSA device list:
> [ 0.545879] #0: HDA Intel at 0xe1700000 irq 16
> [ 0.589587] EXT3-fs (sda2): recovery required on readonly filesystem
> [ 0.589628] EXT3-fs (sda2): write access will be enabled during recovery
> [ 0.968492] random: nonblocking pool is initialized
> [ 20.504142] kjournald starting. Commit interval 5 seconds
> [ 20.526555] EXT3-fs (sda2): recovery complete
> [ 20.526593] EXT3-fs (sda2): mounted filesystem with writeback data mode
> [ 20.526647] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
> [ 20.535905] devtmpfs: mounted
> [ 20.536611] Freeing unused kernel memory: 776K (ffffffff8165f000 - ffffffff81721000)
> [ 21.549563] EXT3-fs (sda2): using internal journal
> [ 22.074116] udevd[101]: starting version 182
> [ 22.604377] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 22.719468] Linux video capture interface: v2.00
> [ 22.818508] ehci-pci: EHCI PCI platform driver
> [ 22.818714] ehci-pci 0000:00:1d.7: EHCI Host Controller
> [ 22.818777] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
> [ 22.822726] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
> [ 22.822742] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe1704000
> [ 22.828015] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 22.828112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 22.828153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 22.828194] usb usb1: Product: EHCI Host Controller
> [ 22.828232] usb usb1: Manufacturer: Linux 3.17.0-rc4+ ehci_hcd
> [ 22.828277] usb usb1: SerialNumber: 0000:00:1d.7
> [ 22.828589] hub 1-0:1.0: USB hub found
> [ 22.828646] hub 1-0:1.0: 8 ports detected
> [ 23.002973] [drm] Memory usable by graphics device = 2048M
> [ 23.003047] [drm] Replacing VGA console driver
> [ 23.003564] Console: switching to colour dummy device 80x25
> [ 23.009059] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 23.009064] [drm] Driver supports precise vblank timestamp query.
> [ 23.009129] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [ 23.029906] uhci_hcd: USB Universal Host Controller Interface driver
> [ 23.088048] firewire_ohci 0000:03:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
> [ 23.111418] fbcon: inteldrmfb (fb0) is primary device
> [ 23.130029] usb 1-2: new high-speed USB device number 2 using ehci-pci
> [ 23.131726] [drm:intel_pipe_config_compare] *ERROR* mismatch in limited_color_range (expected 1, found 0)
> [ 23.131727] ------------[ cut here ]------------
> [ 23.131770] WARNING: CPU: 3 PID: 149 at drivers/gpu/drm/i915/intel_display.c:10659 check_crtc_state+0x7e3/0xe50 [i915]()
> [ 23.131770] pipe state doesn't match!
> [ 23.131778] Modules linked in: firewire_ohci uhci_hcd(+) videobuf2_dma_sg videobuf2_memops videobuf2_core i915(+) ehci_pci rc_core v4l2_common videodev firewire_core ehci_hcd evdev cfbfillrect cfbimgblt cfbcopyarea drm_kms_helper
> [ 23.131780] CPU: 3 PID: 149 Comm: modprobe Not tainted 3.17.0-rc4+ #322
> [ 23.131781] Hardware name: Gigabyte Technology Co., Ltd. EG41MF-US2H/EG41MF-US2H, BIOS F2 04/09/2009
> [ 23.131783] 0000000000000009 ffffffff8145a016 ffff8802316eb3c0 ffffffff81040d0d
> [ 23.131784] ffff8802369e0060 ffff8802316eb410 0000000000000001 ffff8802369e0708
> [ 23.131786] ffff8802316f3338 ffffffff81040d77 ffffffffa0187529 ffffffff00000018
> [ 23.131786] Call Trace:
> [ 23.131791] [<ffffffff8145a016>] ? dump_stack+0x49/0x6a
> [ 23.131795] [<ffffffff81040d0d>] ? warn_slowpath_common+0x6d/0x90
> [ 23.131797] [<ffffffff81040d77>] ? warn_slowpath_fmt+0x47/0x50
> [ 23.131817] [<ffffffffa0123d03>] ? check_crtc_state+0x7e3/0xe50 [i915]
> [ 23.131838] [<ffffffffa0131c81>] ? intel_modeset_check_state+0x1f1/0x760 [i915]
> [ 23.131858] [<ffffffffa013227d>] ? intel_set_mode+0x1d/0x30 [i915]
> [ 23.131882] [<ffffffffa013334b>] ? intel_crtc_set_config+0xaab/0xe90 [i915]
> [ 23.131884] [<ffffffff811ec3a2>] ? idr_get_empty_slot+0x192/0x3b0
> [ 23.131886] [<ffffffff811eba9b>] ? get_from_free_list+0x3b/0x50
> [ 23.131889] [<ffffffff812a1b6d>] ? drm_mode_set_config_internal+0x5d/0xe0
> [ 23.131893] [<ffffffffa0007eec>] ? restore_fbdev_mode+0xac/0xd0 [drm_kms_helper]
> [ 23.131895] [<ffffffffa0007f29>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x19/0x30 [drm_kms_helper]
> [ 23.131898] [<ffffffffa0009f8d>] ? drm_fb_helper_set_par+0x1d/0x60 [drm_kms_helper]
> [ 23.131918] [<ffffffffa013db61>] ? intel_fbdev_set_par+0x11/0x60 [i915]
> [ 23.131920] [<ffffffff81227720>] ? fbcon_init+0x5e0/0x670
> [ 23.131923] [<ffffffff8127a66c>] ? visual_init+0xac/0x110
> [ 23.131924] [<ffffffff8127c930>] ? do_bind_con_driver+0x170/0x410
> [ 23.131926] [<ffffffff8127d153>] ? do_take_over_console+0xa3/0x190
> [ 23.131928] [<ffffffff81227803>] ? do_fbcon_takeover+0x53/0xb0
> [ 23.131930] [<ffffffff81059e35>] ? notifier_call_chain+0x45/0x70
> [ 23.131931] [<ffffffff8105a12c>] ? __blocking_notifier_call_chain+0x3c/0x60
> [ 23.131934] [<ffffffff8122f5d6>] ? register_framebuffer+0x1f6/0x320
> [ 23.131936] [<ffffffffa0009dcd>] ? drm_fb_helper_initial_config+0x36d/0x510 [drm_kms_helper]
> [ 23.131955] [<ffffffffa01164f7>] ? gen4_read32+0x37/0x40 [i915]
> [ 23.131979] [<ffffffffa0161f20>] ? i915_driver_load+0xfd0/0x1030 [i915]
> [ 23.131982] [<ffffffff8106ef8f>] ? __wake_up+0x2f/0x50
> [ 23.131985] [<ffffffff813ea188>] ? netlink_broadcast_filtered+0x1f8/0x370
> [ 23.131987] [<ffffffff811eded0>] ? kobj_ns_drop+0x60/0x60
> [ 23.131988] [<ffffffff811ee15c>] ? kobject_uevent_env+0xfc/0x400
> [ 23.131991] [<ffffffff812b3b0e>] ? get_device+0xe/0x20
> [ 23.131992] [<ffffffff8145708b>] ? klist_add_tail+0x1b/0x40
> [ 23.131994] [<ffffffff812b4ef2>] ? device_add+0x192/0x5b0
> [ 23.131997] [<ffffffff8129bf4c>] ? drm_dev_register+0x9c/0xf0
> [ 23.131998] [<ffffffff8129e533>] ? drm_get_pci_dev+0xc3/0x1e0
> [ 23.132001] [<ffffffff81213ee0>] ? pci_device_probe+0x60/0xb0
> [ 23.132014] [<ffffffff812b7a9a>] ? really_probe+0x5a/0x220
> [ 23.132015] [<ffffffff812b7d21>] ? __driver_attach+0x81/0x90
> [ 23.132017] [<ffffffff812b7ca0>] ? __device_attach+0x40/0x40
> [ 23.132018] [<ffffffff812b5e4b>] ? bus_for_each_dev+0x5b/0x90
> [ 23.132019] [<ffffffff812b7310>] ? bus_add_driver+0x160/0x210
> [ 23.132021] [<ffffffffa01a0000>] ? 0xffffffffa01a0000
> [ 23.132022] [<ffffffff812b8326>] ? driver_register+0x56/0xe0
> [ 23.132028] [<ffffffff810002b4>] ? do_one_initcall+0x84/0x1b0
> [ 23.132031] [<ffffffff8109f11f>] ? load_module+0x1b5f/0x2150
> [ 23.132033] [<ffffffff8109c090>] ? store_uevent+0x40/0x40
> [ 23.132035] [<ffffffff8109f7a1>] ? SyS_init_module+0x91/0xc0
> [ 23.132037] [<ffffffff81460a21>] ? sysenter_dispatch+0x7/0x1e
> [ 23.132038] ---[ end trace e6521cda3000b0ed ]---
> [ 23.132047] Console: switching to colour frame buffer device 240x67
> [ 23.164707] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [ 23.165971] i915 0000:00:02.0: registered panic notifier
> [ 23.172065] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
> [ 23.173564] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 23.175197] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> [ 23.176624] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100
> [ 23.177963] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> [ 23.179238] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 23.180480] usb usb2: Product: UHCI Host Controller
> [ 23.181873] usb usb2: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd
> [ 23.183202] usb usb2: SerialNumber: 0000:00:1d.0
> [ 23.183875] saa7130/34: v4l2 driver version 0, 2, 17 loaded
> [ 23.183985] saa7133[0]: found at 0000:03:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xe1605000
> [ 23.183989] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
> [ 23.184030] saa7133[0]: board init: gpio is 600c000
> [ 23.189159] hub 2-0:1.0: USB hub found
> [ 23.190284] hub 2-0:1.0: 2 ports detected
> [ 23.191571] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 23.192671] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> [ 23.193809] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200
> [ 23.194969] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 23.196097] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 23.197189] usb usb3: Product: UHCI Host Controller
> [ 23.198252] usb usb3: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd
> [ 23.199367] usb usb3: SerialNumber: 0000:00:1d.1
> [ 23.203809] hub 3-0:1.0: USB hub found
> [ 23.204913] hub 3-0:1.0: 2 ports detected
> [ 23.206150] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 23.207228] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> [ 23.208300] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300
> [ 23.209370] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 23.210409] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 23.211449] usb usb4: Product: UHCI Host Controller
> [ 23.212496] usb usb4: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd
> [ 23.213542] usb usb4: SerialNumber: 0000:00:1d.2
> [ 23.214684] hub 4-0:1.0: USB hub found
> [ 23.215723] hub 4-0:1.0: 2 ports detected
> [ 23.216869] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 23.217907] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> [ 23.218985] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
> [ 23.220051] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 23.221083] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 23.222121] usb usb5: Product: UHCI Host Controller
> [ 23.223158] usb usb5: Manufacturer: Linux 3.17.0-rc4+ uhci_hcd
> [ 23.224182] usb usb5: SerialNumber: 0000:00:1d.3
> [ 23.225298] hub 5-0:1.0: USB hub found
> [ 23.226347] hub 5-0:1.0: 2 ports detected
> [ 23.247965] usb 1-2: New USB device found, idVendor=05e3, idProduct=070e
> [ 23.249047] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=2
> [ 23.250149] usb 1-2: Product: USB Storage
> [ 23.251242] usb 1-2: SerialNumber: 000000009317
> [ 23.287148] saa7133[0]: i2c eeprom read error (err=-5)
> [ 23.589107] firewire_core 0000:03:07.0: created device fw0: GUID 00201c56006cf049, S400
> [ 23.682016] tuner 9-004b: Tuner -1 found with type(s) Radio TV.
> [ 23.718013] tda829x 9-004b: setting tuner address to 61
> [ 23.866037] usb 5-1: new low-speed USB device number 2 using uhci_hcd
> [ 24.032049] usb 5-1: New USB device found, idVendor=046d, idProduct=c517
> [ 24.033200] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 24.034326] usb 5-1: Product: USB Receiver
> [ 24.035426] usb 5-1: Manufacturer: Logitech
> [ 24.053352] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C517.0001/input/input5
> [ 24.054570] logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.3-1/input0
> [ 24.088080] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
> [ 24.089874] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/0003:046D:C517.0002/input/input6
> [ 24.091169] logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1/input1
> [ 24.179012] tda829x 9-004b: type set to tda8290+75a
> [ 24.700029] usb 5-2: new full-speed USB device number 3 using uhci_hcd
> [ 25.065047] usb 5-2: New USB device found, idVendor=1130, idProduct=1620
> [ 25.066319] usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> [ 25.067555] usb 5-2: Product: USB AUDIO
> [ 25.075102] input: USB AUDIO as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.2/0003:1130:1620.0003/input/input7
> [ 25.076471] hid-generic 0003:1130:1620.0003: input: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:1d.3-2/input2
> [ 25.221055] usb 5-2: Warning! Unlikely big volume range (=17152), cval->res is probably wrong.
> [ 25.222409] usb 5-2: [2] FU [PCM Playback Volume] ch = 2, val = 0/17152/1
> [ 25.224044] usbcore: registered new interface driver snd-usb-audio
> [ 25.224335] usb-storage 1-2:1.0: USB Mass Storage device detected
> [ 25.224460] scsi host2: usb-storage 1-2:1.0
> [ 25.224547] usbcore: registered new interface driver usb-storage
> [ 26.227231] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0
> [ 26.228761] sd 2:0:0:0: Attached scsi generic sg3 type 0
> [ 26.231845] scsi 2:0:0:1: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0
> [ 26.233354] sd 2:0:0:1: Attached scsi generic sg4 type 0
> [ 26.237088] scsi 2:0:0:2: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0
> [ 26.238606] sd 2:0:0:2: Attached scsi generic sg5 type 0
> [ 26.242842] scsi 2:0:0:3: Direct-Access Generic STORAGE DEVICE 9317 PQ: 0 ANSI: 0
> [ 26.244394] sd 2:0:0:3: Attached scsi generic sg6 type 0
> [ 26.251462] sd 2:0:0:0: [sdb] Attached SCSI removable disk
> [ 26.255845] sd 2:0:0:1: [sdc] Attached SCSI removable disk
> [ 26.258836] sd 2:0:0:3: [sde] Attached SCSI removable disk
> [ 26.260707] sd 2:0:0:2: [sdd] Attached SCSI removable disk
> [ 27.161014] IR keymap rc-pinnacle-color not found
> [ 27.162371] Registered IR keymap rc-empty
> [ 27.163735] input: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0/input8
> [ 27.165248] rc0: i2c IR (Pinnacle PCTV) as /devices/virtual/rc/rc0
> [ 27.166597] ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-9/9-0047/ir0 [saa7133[0]]
> [ 27.201082] saa7133[0]: registered device video0 [v4l2]
> [ 27.202512] saa7133[0]: registered device vbi0
> [ 27.203876] saa7133[0]: registered device radio0
> [ 27.244494] dvb_init() allocating 1 frontend
> [ 27.282022] DVB: registering new adapter (saa7133[0])
> [ 27.283403] saa7134 0000:03:01.0: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
> [ 27.310010] tda1004x: setting up plls for 48MHz sampling clock
> [ 27.472009] tda1004x: found firmware revision 20 -- ok
> [ 27.651760] saa7134 ALSA driver for DMA sound loaded
> [ 27.653194] saa7133[0]/alsa: saa7133[0] at 0xe1605000 irq 19 registered as card -1
> [ 30.518476] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
> [ 30.519470] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
> [ 30.526803] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
> [ 30.527799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
> [ 30.534924] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
> [ 30.535003] microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28
> [ 30.543181] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
> [ 30.544011] microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28
> [ 31.268683] kjournald starting. Commit interval 5 seconds
> [ 31.268703] EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
> [ 31.268955] EXT3-fs (sda5): using internal journal
> [ 31.268957] EXT3-fs (sda5): recovery complete
> [ 31.268958] EXT3-fs (sda5): mounted filesystem with writeback data mode
> [ 34.117149] kjournald starting. Commit interval 5 seconds
> [ 34.117182] EXT3-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended
> [ 34.117416] EXT3-fs (sda9): using internal journal
> [ 34.162366] EXT3-fs (sda9): recovery complete
> [ 34.163775] EXT3-fs (sda9): mounted filesystem with writeback data mode
> [ 43.494077] kjournald starting. Commit interval 5 seconds
> [ 43.494103] EXT3-fs (sda10): warning: maximal mount count reached, running e2fsck is recommended
> [ 43.496954] EXT3-fs (sda10): using internal journal
> [ 43.541335] EXT3-fs (sda10): recovery complete
> [ 43.542775] EXT3-fs (sda10): mounted filesystem with writeback data mode
> [ 43.610520] Adding 7815584k swap on /dev/sda11. Priority:-1 extents:1 across:7815584k
> [ 44.343311] r8169 0000:02:00.0 eth0: link down
> [ 44.343330] r8169 0000:02:00.0 eth0: link down
> [ 46.039133] r8169 0000:02:00.0 eth0: link up
> [ 47.104089] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Intel-gfx
mailing list