[Intel-gfx] [PATCH 5/5] drm/i915: remove intel_pipe_set_base()
Ville Syrjälä
ville.syrjala at linux.intel.com
Mon Sep 22 12:58:06 CEST 2014
On Fri, Sep 19, 2014 at 06:31:25PM -0300, Gustavo Padovan wrote:
> 2014-09-19 Ville Syrjälä <ville.syrjala at linux.intel.com>:
>
> > On Thu, Sep 18, 2014 at 04:43:16PM -0300, Gustavo Padovan wrote:
> > > From: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
> > >
> > > After some refactor intel_primary_plane_setplane() does the same
> > > as intel_pipe_set_base() so we can get rid of it and replace the calls
> > > with intel_primary_plane_setplane().
> > >
> > > Signed-off-by: Gustavo Padovan <gustavo.padovan at collabora.co.uk>
> > > ---
> > > drivers/gpu/drm/i915/intel_display.c | 79 ++++--------------------------------
> > > 1 file changed, 8 insertions(+), 71 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > > index 6c61c8f..2477587 100644
> > > --- a/drivers/gpu/drm/i915/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/intel_display.c
> > > @@ -2763,74 +2763,6 @@ static void intel_update_pipe_size(struct intel_crtc *crtc)
> > > crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
> > > }
> > >
> > > -static int
> > > -intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
> > > - struct drm_framebuffer *fb)
> > > -{
> > > - struct drm_device *dev = crtc->dev;
> > > - struct drm_i915_private *dev_priv = dev->dev_private;
> > > - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > > - enum pipe pipe = intel_crtc->pipe;
> > > - struct drm_framebuffer *old_fb = crtc->primary->fb;
> > > - struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> > > - struct drm_i915_gem_object *old_obj = intel_fb_obj(old_fb);
> > > - int ret;
> > > -
> > > - if (intel_crtc_has_pending_flip(crtc)) {
> > > - DRM_ERROR("pipe is still busy with an old pageflip\n");
> > > - return -EBUSY;
> > > - }
> > > -
> > > - /* no fb bound */
> > > - if (!fb) {
> > > - DRM_ERROR("No FB bound\n");
> > > - return 0;
> > > - }
> > > -
> > > - if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) {
> > > - DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n",
> > > - plane_name(intel_crtc->plane),
> > > - INTEL_INFO(dev)->num_pipes);
> > > - return -EINVAL;
> > > - }
> > > -
> > > - mutex_lock(&dev->struct_mutex);
> > > - ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
> > > - if (ret == 0)
> > > - i915_gem_track_fb(old_obj, obj,
> > > - INTEL_FRONTBUFFER_PRIMARY(pipe));
> > > - mutex_unlock(&dev->struct_mutex);
> > > - if (ret != 0) {
> > > - DRM_ERROR("pin & fence failed\n");
> > > - return ret;
> > > - }
> > > -
> > > - intel_update_pipe_size(intel_crtc);
> > > -
> > > - dev_priv->display.update_primary_plane(crtc, fb, x, y);
> > > -
> > > - if (intel_crtc->active)
> > > - intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_PRIMARY(pipe));
> > > -
> > > - crtc->primary->fb = fb;
> > > - crtc->x = x;
> > > - crtc->y = y;
> > > -
> > > - if (old_fb) {
> > > - if (intel_crtc->active && old_fb != fb)
> > > - intel_wait_for_vblank(dev, intel_crtc->pipe);
> > > - mutex_lock(&dev->struct_mutex);
> > > - intel_unpin_fb_obj(old_obj);
> > > - mutex_unlock(&dev->struct_mutex);
> > > - }
> > > -
> > > - mutex_lock(&dev->struct_mutex);
> > > - intel_update_fbc(dev);
> > > - mutex_unlock(&dev->struct_mutex);
> > > -
> > > - return 0;
> > > -}
> > > -
> > > static void intel_fdi_normal_train(struct drm_crtc *crtc)
> > > {
> > > struct drm_device *dev = crtc->dev;
> > > @@ -9797,6 +9729,7 @@ static int intel_crtc_commit_page_flip(struct drm_crtc *crtc,
> > > struct drm_framebuffer *old_fb = crtc->primary->fb;
> > > struct drm_i915_gem_object *obj = intel_fb_obj(fb);
> > > struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > > + struct drm_plane *primary = crtc->primary;
> > > enum pipe pipe = intel_crtc->pipe;
> > > struct intel_unpin_work *work;
> > > struct intel_engine_cs *ring;
> > > @@ -9938,7 +9871,9 @@ free_work:
> > > if (ret == -EIO) {
> > > out_hang:
> > > intel_crtc_wait_for_pending_flips(crtc);
> > > - ret = intel_pipe_set_base(crtc, crtc->x, crtc->y, fb);
> > > + ret = primary->funcs->update_plane(primary, crtc, fb,
> > > + 0, 0, 0, 0,
> > > + crtc->x, crtc->y, 0, 0);
> >
> > I think we want page flips to not change the current plane setup so
> > these should be:
> > intel_plane->crtc_x/y/w/h
> > intel_plane->src_x/y/w/h
>
> Okay.
>
> >
> > > if (ret == 0 && event) {
> > > spin_lock_irq(&dev->event_lock);
> > > drm_send_vblank_event(dev, pipe, event);
> > > @@ -11475,11 +11410,13 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
> > > set->x, set->y, set->fb);
> > > } else if (config->fb_changed) {
> > > struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc);
> > > + struct drm_plane *primary = set->crtc->primary;
> > >
> > > intel_crtc_wait_for_pending_flips(set->crtc);
> > >
> > > - ret = intel_pipe_set_base(set->crtc,
> > > - set->x, set->y, set->fb);
> > > + ret = primary->funcs->update_plane(primary, set->crtc, set->fb,
> > > + 0, 0, 0, 0,
> > > + set->x, set->y, 0, 0);
> >
> > And these should really be:
> > 0, 0, hdisplay, vdisplay,
> > set->x << 16, set->y << 16, hdisplay << 16, vdisplay << 16,
> >
> > Oh, one extra complication here is the stereo modes, so I think we'll be
> > needing to borrow the stereo doubling trick from intel_modeset_pipe_config()
> > to adjust hdisplay/vdisplay when appropriate.
>
> I see, so just calling intel_modeset_pipe_config() and getting
> pipe_config's pipe_src_w and pipe_src_h will fix the problem?
No, we shouldn't call intel_modeset_pipe_config() here. You just need to
extract the code to compute pipe_src_w/h when dealing with a doubled
stereo mode. We also use the same trick in drm_crtc_check_viewport().
That's three instances of the same thing basically so maybe we should put
that bit of code into a small helper function and just call that from all
three places.
>
> >
> > And we'll be needing something also for the full modeset path
> > so that intel_plane->crtc_* and intel_plane->src_* get initialized
> > properly. Perhaps it's enough to rip out the fb pin/unpin stuff
> > from __intel_set_mode() and just replace it with a call to
> > ->update_plane().
>
> I see. Is it okay to update the primary planes from there?
At that point the pipe should be disabled, so in theory the
.update_plane() should just end up doing pin+unpin+update the
saved plane coords. But I might be missing something subtle here.
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list