[Intel-gfx] [PATCH 3/9] drm/i915: MIPI Port Ctrl related changes for dual link configuration

[Jani Nikula]

On Wed, 24 Sep 2014, Gaurav K Singh <gaurav.k.singh at intel.com> wrote:
> Signed-off-by: Gaurav K Singh <gaurav.k.singh at intel.com>
> Signed-off-by: Shobhit Kumar <shobhit.kumar at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h            |    1 +
>  drivers/gpu/drm/i915/intel_dsi.c           |   53 ++++++++++++++++++++++------
>  drivers/gpu/drm/i915/intel_dsi.h           |    1 +
>  drivers/gpu/drm/i915/intel_dsi_panel_vbt.c |    1 +
>  4 files changed, 45 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index ad8179b..922d807 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6215,6 +6215,7 @@ enum punit_power_well {
>  #define  DPI_ENABLE					(1 << 31) /* A + B */
>  #define  MIPIA_MIPI4DPHY_DELAY_COUNT_SHIFT		27
>  #define  MIPIA_MIPI4DPHY_DELAY_COUNT_MASK		(0xf << 27)
> +#define  DUAL_LINK_MODE_SHIFT				26
>  #define  DUAL_LINK_MODE_MASK				(1 << 26)
>  #define  DUAL_LINK_MODE_FRONT_BACK			(0 << 26)
>  #define  DUAL_LINK_MODE_PIXEL_ALTERNATIVE		(1 << 26)
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index e456ca9..3b1890e 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -109,13 +109,31 @@ static void intel_dsi_port_enable(struct intel_encoder *encoder)
>  	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
>  	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>  	enum pipe pipe = intel_crtc->pipe;
> -	u32 temp;
> -
> -	/* assert ip_tg_enable signal */
> -	temp = I915_READ(MIPI_PORT_CTRL(pipe)) & ~LANE_CONFIGURATION_MASK;
> -	temp = temp | intel_dsi->port_bits;
> -	I915_WRITE(MIPI_PORT_CTRL(pipe), temp | DPI_ENABLE);
> -	POSTING_READ(MIPI_PORT_CTRL(pipe));
> +	u32 temp, port_control = 0;
> +
> +	if (intel_dsi->dual_link) {
> +		port_control = (intel_dsi->dual_link - 1)
> +					<< DUAL_LINK_MODE_SHIFT;
> +		port_control |= pipe ? LANE_CONFIGURATION_DUAL_LINK_B :
> +					LANE_CONFIGURATION_DUAL_LINK_A;
> +		/*For Port A */
> +		temp = I915_READ(MIPI_PORT_CTRL(0));
> +		temp = temp | port_control;
> +		I915_WRITE(MIPI_PORT_CTRL(0), temp | DPI_ENABLE);
> +		POSTING_READ(MIPI_PORT_CTRL(0));
> +
> +		/* For Port C */
> +		temp = I915_READ(MIPI_PORT_CTRL(1));
> +		I915_WRITE(MIPI_PORT_CTRL(1), temp | DPI_ENABLE);
> +		POSTING_READ(MIPI_PORT_CTRL(1));

This calls for a cleanup in i915_reg.h for per port vs. per transcoder
registers. MIPI_PORT_CTRL(1) uses _TRANSCODER macro. We also have enum
port with PORT_C == 2. This gets confusing.

> +	} else {
> +		/* assert ip_tg_enable signal */
> +		temp = I915_READ(MIPI_PORT_CTRL(pipe)) &
> +					~LANE_CONFIGURATION_MASK;
> +		temp = temp | intel_dsi->port_bits;
> +		I915_WRITE(MIPI_PORT_CTRL(pipe), temp | DPI_ENABLE);
> +		POSTING_READ(MIPI_PORT_CTRL(pipe));
> +	}
>  }
>  
>  static void intel_dsi_port_disable(struct intel_encoder *encoder)
> @@ -123,13 +141,26 @@ static void intel_dsi_port_disable(struct intel_encoder *encoder)
>  	struct drm_device *dev = encoder->base.dev;
>  	struct drm_i915_private *dev_priv = dev->dev_private;
>  	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
>  	enum pipe pipe = intel_crtc->pipe;
>  	u32 temp;
>  
> -	/* de-assert ip_tg_enable signal */
> -	temp = I915_READ(MIPI_PORT_CTRL(pipe));
> -	I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE);
> -	POSTING_READ(MIPI_PORT_CTRL(pipe));
> +	if (intel_dsi->dual_link) {
> +		/*For Port A */
> +		temp = I915_READ(MIPI_PORT_CTRL(0));
> +		I915_WRITE(MIPI_PORT_CTRL(0), temp & ~DPI_ENABLE);
> +		POSTING_READ(MIPI_PORT_CTRL(0));
> +
> +		/* For Port C */
> +		temp = I915_READ(MIPI_PORT_CTRL(1));
> +		I915_WRITE(MIPI_PORT_CTRL(1), temp & ~DPI_ENABLE);
> +		POSTING_READ(MIPI_PORT_CTRL(1));
> +	} else {
> +		/* de-assert ip_tg_enable signal */
> +		temp = I915_READ(MIPI_PORT_CTRL(pipe));
> +		I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE);
> +		POSTING_READ(MIPI_PORT_CTRL(pipe));
> +	}
>  }
>  
>  static void intel_dsi_device_ready(struct intel_encoder *encoder)
> diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
> index 587e71f..950ab41 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/intel_dsi.h
> @@ -101,6 +101,7 @@ struct intel_dsi {
>  	u8 clock_stop;
>  
>  	u8 escape_clk_div;
> +	u8 dual_link;
>  	u32 port_bits;
>  	u32 bw_timer;
>  	u32 dphy_reg;
> diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> index 051bfff..d424ebc 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
> @@ -283,6 +283,7 @@ static bool generic_init(struct intel_dsi_device *dsi)
>  	intel_dsi->lane_count = mipi_config->lane_cnt + 1;
>  	intel_dsi->pixel_format = mipi_config->videomode_color_format << 7;
>  	intel_dsi->port = 0;
> +	intel_dsi->dual_link = mipi_config->dual_link;
>  
>  	if (intel_dsi->pixel_format == VID_MODE_FORMAT_RGB666)
>  		bits_per_pixel = 18;
> -- 
> 1.7.9.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Technology Center