[Intel-gfx] [PATCH 75/89] drm/i915/skl: fetch, enable/disable pfit as needed
Damien Lespiau
damien.lespiau at intel.com
Wed Sep 24 12:44:53 CEST 2014
Hi Jesse,
Mind looking at those review comments?
--
Damien
On Tue, Sep 23, 2014 at 05:50:29PM -0300, Paulo Zanoni wrote:
> 2014-09-04 8:27 GMT-03:00 Damien Lespiau <damien.lespiau at intel.com>:
> > From: Jesse Barnes <jbarnes at virtuousgeek.org>
> >
> > This moved around on SKL, so we need to make sure we read/write the
> > correct regs.
> >
> > Signed-off-by: Jesse Barnes <jbarnes at virtuougseek.org>
> > Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 13 ++++++++
> > drivers/gpu/drm/i915/intel_display.c | 61 +++++++++++++++++++++++++++++++++---
> > 2 files changed, 70 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 176e84e..35c0759 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -4833,6 +4833,19 @@ enum skl_disp_power_wells {
> > #define PF_VSCALE(pipe) _PIPE(pipe, _PFA_VSCALE, _PFB_VSCALE)
> > #define PF_HSCALE(pipe) _PIPE(pipe, _PFA_HSCALE, _PFB_HSCALE)
> >
> > +#define _PSA_CTL 0x68180
> > +#define _PSB_CTL 0x68980
> > +#define PS_ENABLE (1<<31)
> > +#define PS_PIPE_SEL(pipe) ((pipe)<<27)
>
> The PS_PIPE_SEL define is wrong, but it is also not used in the code
> you wrote, so just remove this line.
>
>
> > +#define _PSA_WIN_SZ 0x68174
> > +#define _PSB_WIN_SZ 0x68974
> > +#define _PSA_WIN_POS 0x68178
>
> 0x68170
>
> > +#define _PSB_WIN_POS 0x68978
>
> 0x68970
>
> > +
> > +#define PS_CTL(pipe) _PIPE(pipe, _PSA_CTL, _PSB_CTL)
> > +#define PS_WIN_SZ(pipe) _PIPE(pipe, _PSA_WIN_SZ, _PSB_WIN_SZ)
> > +#define PS_WIN_POS(pipe) _PIPE(pipe, _PSA_WIN_POS, _PSB_WIN_POS)
> > +
> > /* legacy palette */
> > #define _LGC_PALETTE_A 0x4a000
> > #define _LGC_PALETTE_B 0x4a800
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 393bd19..9b31342 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -3882,6 +3882,19 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
> > }
> > }
> >
> > +static void skylake_pfit_enable(struct intel_crtc *crtc)
> > +{
> > + struct drm_device *dev = crtc->base.dev;
> > + struct drm_i915_private *dev_priv = dev->dev_private;
> > + int pipe = crtc->pipe;
> > +
> > + if (crtc->config.pch_pfit.enabled) {
> > + I915_WRITE(PS_CTL(pipe), PS_ENABLE);
> > + I915_WRITE(PS_WIN_POS(pipe), crtc->config.pch_pfit.pos);
> > + I915_WRITE(PS_WIN_SZ(pipe), crtc->config.pch_pfit.size);
> > + }
> > +}
> > +
> > static void ironlake_pfit_enable(struct intel_crtc *crtc)
> > {
> > struct drm_device *dev = crtc->base.dev;
> > @@ -4264,7 +4277,10 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
> >
> > intel_ddi_enable_pipe_clock(intel_crtc);
> >
> > - ironlake_pfit_enable(intel_crtc);
> > + if (IS_SKYLAKE(dev))
> > + skylake_pfit_enable(intel_crtc);
> > + else
> > + ironlake_pfit_enable(intel_crtc);
> >
> > /*
> > * On ILK+ LUT must be loaded before the pipe is running but with
> > @@ -4295,6 +4311,20 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
> > intel_crtc_enable_planes(crtc);
> > }
> >
> > +static void skylake_pfit_disable(struct intel_crtc *crtc)
> > +{
> > + struct drm_device *dev = crtc->base.dev;
> > + struct drm_i915_private *dev_priv = dev->dev_private;
> > + int pipe = crtc->pipe;
> > +
> > + /* To avoid upsetting the power well on haswell only disable the pfit if
> > + * it's in use. The hw state code will make sure we get this right. */
> > + if (crtc->config.pch_pfit.enabled) {
> > + I915_WRITE(PS_CTL(pipe), 0);
> > + I915_WRITE(PS_WIN_SZ(pipe), 0);
>
> Why not also zero _POS just like HSW? Can this affect the HW state
> checker output?
>
> Everything else looks correct.
>
> > + }
> > +}
> > +
> > static void ironlake_pfit_disable(struct intel_crtc *crtc)
> > {
> > struct drm_device *dev = crtc->base.dev;
> > @@ -4399,7 +4429,10 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
> >
> > intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder);
> >
> > - ironlake_pfit_disable(intel_crtc);
> > + if (IS_SKYLAKE(dev))
> > + skylake_pfit_disable(intel_crtc);
> > + else
> > + ironlake_pfit_disable(intel_crtc);
> >
> > intel_ddi_disable_pipe_clock(intel_crtc);
> >
> > @@ -7382,6 +7415,22 @@ static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
> > &pipe_config->fdi_m_n, NULL);
> > }
> >
> > +static void skylake_get_pfit_config(struct intel_crtc *crtc,
> > + struct intel_crtc_config *pipe_config)
> > +{
> > + struct drm_device *dev = crtc->base.dev;
> > + struct drm_i915_private *dev_priv = dev->dev_private;
> > + uint32_t tmp;
> > +
> > + tmp = I915_READ(PS_CTL(crtc->pipe));
> > +
> > + if (tmp & PS_ENABLE) {
> > + pipe_config->pch_pfit.enabled = true;
> > + pipe_config->pch_pfit.pos = I915_READ(PS_WIN_POS(crtc->pipe));
> > + pipe_config->pch_pfit.size = I915_READ(PS_WIN_SZ(crtc->pipe));
> > + }
> > +}
> > +
> > static void ironlake_get_pfit_config(struct intel_crtc *crtc,
> > struct intel_crtc_config *pipe_config)
> > {
> > @@ -7940,8 +7989,12 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
> > intel_get_pipe_timings(crtc, pipe_config);
> >
> > pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
> > - if (intel_display_power_enabled(dev_priv, pfit_domain))
> > - ironlake_get_pfit_config(crtc, pipe_config);
> > + if (intel_display_power_enabled(dev_priv, pfit_domain)) {
> > + if (IS_SKYLAKE(dev))
> > + skylake_get_pfit_config(crtc, pipe_config);
> > + else
> > + ironlake_get_pfit_config(crtc, pipe_config);
> > + }
> >
> > if (IS_HASWELL(dev))
> > pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
> > --
> > 1.8.3.1
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>
>
> --
> Paulo Zanoni
More information about the Intel-gfx
mailing list