[Intel-gfx] [PATCH] drm/i915: Enable pixel replicated modes on BDW and HSW.

[Clint Taylor]

On 09/24/2014 01:51 AM, Daniel Vetter wrote:
> On Tue, Sep 23, 2014 at 11:06:56AM -0700, clinton.a.taylor at intel.com wrote:
>> From: Clint Taylor <clinton.a.taylor at intel.com>
>>
>> Haswell and later silicon has added a new pixel replication register
>> to the pipe timings for each transcoder. Now in addition to the
>> DPLL_A_MD register for the pixel clock double, we also need to write to
>> the TRANS_MULT_n (0x6002c) register to double the pixel data. Writing
>> to the DPLL only double the pixel clock.
>>
>> Signed-off-by: Clint Taylor <clinton.a.taylor at intel.com>
>> ---
>>   drivers/gpu/drm/i915/i915_reg.h      |    3 +++
>>   drivers/gpu/drm/i915/intel_display.c |    6 +++++-
>>   2 files changed, 8 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> index 15c0eaa..7c078d9 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -2431,6 +2431,7 @@ enum punit_power_well {
>>   #define _PIPEASRC	0x6001c
>>   #define _BCLRPAT_A	0x60020
>>   #define _VSYNCSHIFT_A	0x60028
>> +#define _MULTIPLY_A	0x6002c
>>
>>   /* Pipe B timing regs */
>>   #define _HTOTAL_B	0x61000
>> @@ -2442,6 +2443,7 @@ enum punit_power_well {
>>   #define _PIPEBSRC	0x6101c
>>   #define _BCLRPAT_B	0x61020
>>   #define _VSYNCSHIFT_B	0x61028
>> +#define _MULTIPLY_B	0x6102c
>>
>>   #define TRANSCODER_A_OFFSET 0x60000
>>   #define TRANSCODER_B_OFFSET 0x61000
>> @@ -2462,6 +2464,7 @@ enum punit_power_well {
>>   #define BCLRPAT(trans) _TRANSCODER2(trans, _BCLRPAT_A)
>>   #define VSYNCSHIFT(trans) _TRANSCODER2(trans, _VSYNCSHIFT_A)
>>   #define PIPESRC(trans) _TRANSCODER2(trans, _PIPEASRC)
>> +#define MULTIPLY(trans) _TRANSCODER2(trans, _MULTIPLY_A)
>
> MULTIPLY is a bit generic and doesn't even match Bspec lingo. I'd just go
> with PIPE_MULTI instead to match Bspec and give it a nice PIPE_ prefix.
>>
>>   /* HSW+ eDP PSR registers */
>>   #define EDP_PSR_BASE(dev)                       (IS_HASWELL(dev) ? 0x64800 : 0x6f800)
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index c092ff4..e58fcde 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -4152,6 +4152,9 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
>>
>>   	intel_set_pipe_timings(intel_crtc);
>>
>> +	I915_WRITE(MULTIPLY(intel_crtc->config.cpu_transcoder),
>
> This register is per-pipe, so needs to be indexed with intel_crtc->pipe.
> Same below.
>
The MULTIPLY Macro calls the _TRANSCODER2 MACRO which already indexes 
the register based on intel_crtc->pipe. This should be all that's required.

-Clint

> Otherwise this loooks good.
> -Daniel
>
>
>> +			    intel_crtc->config.pixel_multiplier - 1);
>> +
>>   	if (intel_crtc->config.has_pch_encoder) {
>>   		intel_cpu_transcoder_set_m_n(intel_crtc,
>>   				     &intel_crtc->config.fdi_m_n, NULL);
>> @@ -7811,7 +7814,8 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
>>   		pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
>>   			(I915_READ(IPS_CTL) & IPS_ENABLE);
>>
>> -	pipe_config->pixel_multiplier = 1;
>> +	pipe_config->pixel_multiplier =
>> +			I915_READ(MULTIPLY(pipe_config->cpu_transcoder)) + 1;
>>
>>   	return true;
>>   }
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>