[Intel-gfx] [PATCH v2] drm/i915: Enable pixel replicated modes on BDW and HSW.
clinton.a.taylor at intel.com
clinton.a.taylor at intel.com
Thu Sep 25 01:51:30 CEST 2014
From: Clint Taylor <clinton.a.taylor at intel.com>
Haswell and later silicon has added a new pixel replication register
to the pipe timings for each transcoder. Now in addition to the
DPLL_A_MD register for the pixel clock double, we also need to write
to the TRANS_MULT_n (0x6002c) register to double the pixel data. Writing
to the DPLL only double the pixel clock.
ver2: Macro name change from MULTIPLY to PIPE_MULTI. (Daniel)
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Jani Nikula <jani.nikula at intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 3 +++
drivers/gpu/drm/i915/intel_display.c | 6 +++++-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index ad8179b..035d58c 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2443,6 +2443,7 @@ enum punit_power_well {
#define _PIPEASRC 0x6001c
#define _BCLRPAT_A 0x60020
#define _VSYNCSHIFT_A 0x60028
+#define _MULTIPLY_A 0x6002c
/* Pipe B timing regs */
#define _HTOTAL_B 0x61000
@@ -2454,6 +2455,7 @@ enum punit_power_well {
#define _PIPEBSRC 0x6101c
#define _BCLRPAT_B 0x61020
#define _VSYNCSHIFT_B 0x61028
+#define _MULTIPLY_B 0x6102c
#define TRANSCODER_A_OFFSET 0x60000
#define TRANSCODER_B_OFFSET 0x61000
@@ -2474,6 +2476,7 @@ enum punit_power_well {
#define BCLRPAT(trans) _TRANSCODER2(trans, _BCLRPAT_A)
#define VSYNCSHIFT(trans) _TRANSCODER2(trans, _VSYNCSHIFT_A)
#define PIPESRC(trans) _TRANSCODER2(trans, _PIPEASRC)
+#define PIPE_MULTI(trans) _TRANSCODER2(trans, _MULTIPLY_A)
/* HSW+ eDP PSR registers */
#define EDP_PSR_BASE(dev) (IS_HASWELL(dev) ? 0x64800 : 0x6f800)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 858011d..49eced4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4168,6 +4168,9 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
intel_set_pipe_timings(intel_crtc);
+ I915_WRITE(PIPE_MULTI(intel_crtc->config.cpu_transcoder),
+ intel_crtc->config.pixel_multiplier - 1);
+
if (intel_crtc->config.has_pch_encoder) {
intel_cpu_transcoder_set_m_n(intel_crtc,
&intel_crtc->config.fdi_m_n, NULL);
@@ -7853,7 +7856,8 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) &&
(I915_READ(IPS_CTL) & IPS_ENABLE);
- pipe_config->pixel_multiplier = 1;
+ pipe_config->pixel_multiplier =
+ I915_READ(PIPE_MULTI(pipe_config->cpu_transcoder)) + 1;
return true;
}
--
1.7.9.5
More information about the Intel-gfx
mailing list