[Intel-gfx] [PATCH] drm/i915: Introduce sw_turbo parameter.

Daniel Vetter daniel at ffwll.ch
Mon Sep 29 15:06:52 CEST 2014


On Thu, Sep 25, 2014 at 07:06:20PM -0400, Rodrigo Vivi wrote:
> bdw_sw_turbo is been enabled unconditionally and it is causing gpu to be busted.
> GT freq stays on max value even when it is on idle or with screen off.
> 
> And if this isn't actually the case it is at least breaking the current rps API.
> So let's let it disabled by default for now until it is properly adressing the tests.
> 
> References: https://bugs.freedesktop.org/show_bug.cgi?id=77869
> Cc: Daisy Sun <daisy.sun at intel.com>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>

Given Chris' feedback on that patch I guess I'll just revert it.

Aside: When fixing up patches _always_ cite the offending commit.

Thanks, Daniel

> ---
>  drivers/gpu/drm/i915/i915_drv.h    | 1 +
>  drivers/gpu/drm/i915/i915_params.c | 6 ++++++
>  drivers/gpu/drm/i915/intel_pm.c    | 2 +-
>  3 files changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index e845a81..159ddd8 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -2215,6 +2215,7 @@ struct i915_params {
>  	int lvds_channel_mode;
>  	int panel_use_ssc;
>  	int vbt_sdvo_panel_type;
> +	int sw_turbo;
>  	int enable_rc6;
>  	int enable_fbc;
>  	int enable_ppgtt;
> diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
> index 139f490..1cd587c 100644
> --- a/drivers/gpu/drm/i915/i915_params.c
> +++ b/drivers/gpu/drm/i915/i915_params.c
> @@ -33,6 +33,7 @@ struct i915_params i915 __read_mostly = {
>  	.lvds_channel_mode = 0,
>  	.panel_use_ssc = -1,
>  	.vbt_sdvo_panel_type = -1,
> +	.sw_turbo = 0,
>  	.enable_rc6 = -1,
>  	.enable_fbc = -1,
>  	.enable_execlists = 0,
> @@ -72,6 +73,11 @@ MODULE_PARM_DESC(semaphores,
>  	"Use semaphores for inter-ring sync "
>  	"(default: -1 (use per-chip defaults))");
>  
> +module_param_named(sw_turbo, i915.sw_turbo, int, 0400);
> +MODULE_PARM_DESC(sw_turbo,
> +	"Use SW Turbo. Currently available only on Broadwell"
> +	"(default: 0 (disabled))");
> +
>  module_param_named(enable_rc6, i915.enable_rc6, int, 0400);
>  MODULE_PARM_DESC(enable_rc6,
>  	"Enable power-saving render C-state 6. "
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 49af81f..d51b17d 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -3789,7 +3789,7 @@ static void gen8_enable_rps(struct drm_device *dev)
>  	int unused;
>  
>  	/* Use software Turbo for BDW */
> -	dev_priv->rps.is_bdw_sw_turbo = IS_BROADWELL(dev);
> +	dev_priv->rps.is_bdw_sw_turbo = IS_BROADWELL(dev) && i915.sw_turbo;
>  
>  	/* 1a: Software RC state - RC0 */
>  	I915_WRITE(GEN6_RC_STATE, 0);
> -- 
> 1.9.3
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch



More information about the Intel-gfx mailing list