[Intel-gfx] [PATCH 20/20] drm/i915: Enable skylake sprite plane scaling using shared scalers
Matt Roper
matthew.d.roper at intel.com
Thu Apr 2 16:05:28 PDT 2015
On Wed, Apr 01, 2015 at 07:59:49PM -0700, Chandra Konduru wrote:
> This patch enables skylake sprite plane display scaling using shared
> scalers atomic desgin.
>
> v2:
> -use single copy of scaler limits (Matt)
>
> v3:
> -detaching scalers moved to crtc commit path (Matt)
>
> Signed-off-by: Chandra Konduru <chandra.konduru at intel.com>
> ---
> drivers/gpu/drm/i915/intel_sprite.c | 60 +++++++++++++++++++++++++++++------
> 1 file changed, 50 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index c8feff7..562f90c 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -33,6 +33,7 @@
> #include <drm/drm_crtc.h>
> #include <drm/drm_fourcc.h>
> #include <drm/drm_rect.h>
> +#include <drm/drm_atomic.h>
> #include <drm/drm_plane_helper.h>
> #include "intel_drv.h"
> #include <drm/i915_drm.h>
> @@ -194,6 +195,8 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
> int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
> const struct drm_intel_sprite_colorkey *key = &intel_plane->ckey;
> unsigned long surf_addr;
> + struct intel_crtc_state *crtc_state = to_intel_crtc(crtc)->config;
> + int scaler_id;
>
> plane_ctl = PLANE_CTL_ENABLE |
> PLANE_CTL_PIPE_CSC_ENABLE;
> @@ -264,6 +267,8 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
> stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
> fb->pixel_format);
>
> + scaler_id = to_intel_plane_state(drm_plane->state)->scaler_id;
> +
> /* Sizes are 0 based */
> src_w--;
> src_h--;
> @@ -283,10 +288,30 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
>
> surf_addr = intel_plane_obj_offset(intel_plane, obj);
>
> + /* program plane scaler */
> + if (scaler_id >= 0) {
> + uint32_t ps_ctrl = 0;
> +
> + DRM_DEBUG_KMS("plane = %d PS_PLANE_SEL(plane) = 0x%x\n", plane,
> + PS_PLANE_SEL(plane));
> + ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(plane) |
> + crtc_state->scaler_state.scalers[scaler_id].mode |
> + crtc_state->scaler_state.scalers[scaler_id].filter;
> + I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
> + I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
> + I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (crtc_x << 16) | crtc_y);
> + I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id),
> + ((crtc_w + 1) << 16)|(crtc_h + 1));
> +
> + I915_WRITE(PLANE_POS(pipe, plane), 0);
> + I915_WRITE(PLANE_SIZE(pipe, plane), (src_h << 16) | src_w);
> + } else {
> + I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
> + I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
> + }
> +
> I915_WRITE(PLANE_OFFSET(pipe, plane), (y << 16) | x);
> I915_WRITE(PLANE_STRIDE(pipe, plane), fb->pitches[0] / stride_div);
> - I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
> - I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
> I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
> I915_WRITE(PLANE_SURF(pipe, plane), surf_addr);
> POSTING_READ(PLANE_SURF(pipe, plane));
> @@ -863,7 +888,9 @@ static int
> intel_check_sprite_plane(struct drm_plane *plane,
> struct intel_plane_state *state)
> {
> + struct drm_device *dev = plane->dev;
> struct intel_crtc *intel_crtc = to_intel_crtc(state->base.crtc);
> + struct intel_crtc_state *crtc_state;
> struct intel_plane *intel_plane = to_intel_plane(plane);
> struct drm_framebuffer *fb = state->base.fb;
> int crtc_x, crtc_y;
> @@ -872,11 +899,16 @@ intel_check_sprite_plane(struct drm_plane *plane,
> struct drm_rect *src = &state->src;
> struct drm_rect *dst = &state->dst;
> const struct drm_rect *clip = &state->clip;
> + struct intel_crtc_scaler_state *scaler_state;
> int hscale, vscale;
> int max_scale, min_scale;
> int pixel_size;
> + int ret;
>
> intel_crtc = intel_crtc ? intel_crtc : to_intel_crtc(plane->crtc);
> + crtc_state = state->base.state ?
> + intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;
> + scaler_state = crtc_state ? &crtc_state->scaler_state : NULL;
>
> if (!fb) {
> state->visible = false;
> @@ -903,6 +935,11 @@ intel_check_sprite_plane(struct drm_plane *plane,
> max_scale = intel_plane->max_downscale << 16;
> min_scale = intel_plane->can_scale ? 1 : (1 << 16);
>
> + if (INTEL_INFO(dev)->gen >= 9 && scaler_state && scaler_state->num_scalers) {
> + min_scale = 1;
> + max_scale = (100 << 16) / scaler_state->min_hsr;
> + }
> +
> drm_rect_rotate(src, fb->width << 16, fb->height << 16,
> state->base.rotation);
>
> @@ -998,8 +1035,8 @@ intel_check_sprite_plane(struct drm_plane *plane,
> width_bytes = ((src_x * pixel_size) & 63) +
> src_w * pixel_size;
>
> - if (src_w > 2048 || src_h > 2048 ||
> - width_bytes > 4096 || fb->pitches[0] > 4096) {
> + if (INTEL_INFO(dev)->gen < 9 && (src_w > 2048 || src_h > 2048 ||
> + width_bytes > 4096 || fb->pitches[0] > 4096)) {
> DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
> return -EINVAL;
> }
> @@ -1053,6 +1090,13 @@ finish:
> }
> }
>
> + if (INTEL_INFO(dev)->gen >= 9) {
> + ret = skl_update_scaler_users(intel_crtc, crtc_state, intel_plane,
> + state, 0);
> + if (ret)
> + return ret;
> + }
> +
> return 0;
> }
>
> @@ -1264,12 +1308,8 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
> }
> break;
> case 9:
> - /*
> - * FIXME: Skylake planes can be scaled (with some restrictions),
> - * but this is for another time.
> - */
> - intel_plane->can_scale = false;
> - intel_plane->max_downscale = 1;
> + intel_plane->can_scale = true;
> + intel_plane->max_downscale = 2; /* updated later */
Again, not true about being updated later. We just wind up not using
the value on SKL.
> intel_plane->update_plane = skl_update_plane;
> intel_plane->disable_plane = skl_disable_plane;
> state->scaler_id = -1;
> --
> 1.7.9.5
>
--
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
More information about the Intel-gfx
mailing list