[Intel-gfx] [PATCH 15/19] drm/i915: HSW cdclk support
Sivakumar Thulasimani
sivakumar.thulasimani at intel.com
Mon Apr 6 23:27:23 PDT 2015
On 3/31/2015 4:44 PM, Mika Kahola wrote:
> Implement support for changing the cdclk frequency during runtime on
> HSW. VLV/CHV already have support for this, so we can follow their
> example for the most part. Only the actual hardware programming differs,
> the rest is pretty much the same.
>
> The pipe pixel rate stuff is handled a bit differently for now due to
> the difference in pch vs. gmch pfit handling. Eventually we should unify
> that part to eliminate what is essentially duplicated code.
>
> v2: Grab rps.hw_lock around sandybridge_pcode_write()
> v3: Rebase due to power well vs. .global_resources() reordering
> v4: Rebase due to .global_resources() reordering for Haswell
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Mika Kahola <mika.kahola at intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 3 +
> drivers/gpu/drm/i915/intel_display.c | 161 ++++++++++++++++++++++++++++++++++-
> 2 files changed, 161 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index f26ebd2..b25f712 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6244,6 +6244,7 @@ enum skl_disp_power_wells {
> #define GEN6_PCODE_WRITE_D_COMP 0x11
> #define GEN6_ENCODE_RC6_VID(mv) (((mv) - 245) / 5)
> #define GEN6_DECODE_RC6_VID(vids) (((vids) * 5) + 245)
> +#define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17
> #define DISPLAY_IPS_CONTROL 0x19
> #define HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL 0x1A
> #define GEN6_PCODE_DATA 0x138128
> @@ -6698,10 +6699,12 @@ enum skl_disp_power_wells {
> #define LCPLL_PLL_LOCK (1<<30)
> #define LCPLL_CLK_FREQ_MASK (3<<26)
> #define LCPLL_CLK_FREQ_450 (0<<26)
> +#define LCPLL_CLK_FREQ_ALT_HSW (1<<26) /* 337.5 (ULX) or 540 */
> #define LCPLL_CLK_FREQ_54O_BDW (1<<26)
> #define LCPLL_CLK_FREQ_337_5_BDW (2<<26)
> #define LCPLL_CLK_FREQ_675_BDW (3<<26)
> #define LCPLL_CD_CLOCK_DISABLE (1<<25)
> +#define LCPLL_ROOT_CD_CLOCK_DISABLE (1<<24)
> #define LCPLL_CD2X_CLOCK_DISABLE (1<<23)
> #define LCPLL_POWER_DOWN_ALLOW (1<<22)
> #define LCPLL_CD_SOURCE_FCLK (1<<21)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 3752d5e..cce7103 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -5012,7 +5012,16 @@ static void intel_update_max_cdclk(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
>
> - if (IS_VALLEYVIEW(dev)) {
> + if (IS_HASWELL(dev)) {
> + if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT)
> + dev_priv->max_cdclk_freq = 450000;
> + else if (IS_HSW_ULX(dev))
> + dev_priv->max_cdclk_freq = 337500;
> + else if (IS_HSW_ULT(dev))
> + dev_priv->max_cdclk_freq = 450000;
> + else
> + dev_priv->max_cdclk_freq = 540000;
> + } else if (IS_VALLEYVIEW(dev)) {
> dev_priv->max_cdclk_freq = 400000;
> } else {
> /* otherwise assume cdclk is fixed */
> @@ -8773,6 +8782,144 @@ void hsw_enable_pc8(struct drm_i915_private *dev_priv)
> hsw_disable_lcpll(dev_priv, true, true);
> }
>
> +/* compute the max rate for new configuration */
> +static int ilk_max_pixel_rate(struct drm_i915_private *dev_priv)
> +{
> + struct drm_device *dev = dev_priv->dev;
> + struct intel_crtc *crtc;
> + int max_pixel_rate = 0;
> +
> + for_each_intel_crtc(dev, crtc) {
> + if (crtc->new_enabled)
> + max_pixel_rate = max(max_pixel_rate,
> + ilk_pipe_pixel_rate(crtc->new_config));
> + }
> +
> + return max_pixel_rate;
> +}
> +
> +static int haswell_calc_cdclk(struct drm_i915_private *dev_priv,
> + int max_pixel_rate)
> +{
> + int cdclk;
> +
> + /*
> + * FIXME should also account for plane ratio
> + * once 64bpp pixel formats are supported.
> + */
> + if (max_pixel_rate > 450000)
> + cdclk = 540000;
> + else if (max_pixel_rate > 337500 || !IS_HSW_ULX(dev_priv))
> + cdclk = 450000;
> + else
> + cdclk = 337500;
> +
> + /*
> + * FIXME move the cdclk caclulation to
> + * compute_config() so we can fail gracegully.
> + */
> + if (cdclk > dev_priv->max_cdclk_freq) {
> + DRM_ERROR("requested cdclk (%d kHz) exceeds max (%d kHz)\n",
> + cdclk, dev_priv->max_cdclk_freq);
> + cdclk = dev_priv->max_cdclk_freq;
> + }
> +
> + return cdclk;
> +}
won't this return 337MHz even for platforms that have HSW_CDCLK_LIMIT is
set ? this should return 450MHz if this fuse is set
> +
> +static void haswell_set_cdclk(struct drm_device *dev, int cdclk)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + uint32_t val;
> +
> + if (WARN((I915_READ(LCPLL_CTL) &
> + (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
> + LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
> + LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
> + LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
> + "trying to change cdclk frequency with cdclk not enabled\n"))
> + return;
> +
> + val = I915_READ(LCPLL_CTL);
> + val &= ~LCPLL_CLK_FREQ_MASK;
> +
> + switch (cdclk) {
> + case 450000:
> + val |= LCPLL_CLK_FREQ_450;
> + break;
> + case 337500:
> + case 540000:
> + val |= LCPLL_CLK_FREQ_ALT_HSW;
> + break;
> + default:
> + WARN(1, "invalid cdclk frequency\n");
> + return;
> + }
> +
> + I915_WRITE(LCPLL_CTL, val);
> +
> + if (IS_HSW_ULX(dev)) {
> + mutex_lock(&dev_priv->rps.hw_lock);
> + sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
> + cdclk == 337500);
> + mutex_unlock(&dev_priv->rps.hw_lock);
> + }
> +
> + intel_update_cdclk(dev);
> +
> + WARN(cdclk != dev_priv->cdclk_freq,
> + "cdclk requested %d kHz but got %d kHz\n",
> + cdclk, dev_priv->cdclk_freq);
> +}
> +
> +static void haswell_modeset_global_pipes(struct drm_device *dev,
> + unsigned *prepare_pipes)
> +{
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_crtc *crtc;
> + int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
> +
> + if (haswell_calc_cdclk(dev_priv, max_pixel_rate) ==
> + dev_priv->cdclk_freq)
> + return;
> +
> + /* disable/enable all currently active pipes while we change cdclk */
> + for_each_intel_crtc(dev, crtc)
> + if (crtc->base.enabled)
> + *prepare_pipes |= 1 << crtc->pipe;
> +}
> +
> +static void haswell_modeset_global_resources(struct drm_atomic_state *state)
> +{
> + struct drm_device *dev = state->dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + int max_pixel_rate = ilk_max_pixel_rate(dev_priv);
> + int req_cdclk = haswell_calc_cdclk(dev_priv, max_pixel_rate);
> +
> + if (req_cdclk != dev_priv->cdclk_freq)
> + haswell_set_cdclk(dev, req_cdclk);
> +
> + if (req_cdclk != dev_priv->cdclk_freq) {
> + /*
> + * FIXME: We can end up here with all power domains off, yet
> + * with a CDCLK frequency other than the minimum. To account
> + * for this take the PIPE-A power domain, which covers the HW
> + * blocks needed for the following programming. This can be
> + * removed once it's guaranteed that we get here either with
> + * the minimum CDCLK set, or the required power domains
> + * enabled.
> + */
> + intel_display_power_get(dev_priv, POWER_DOMAIN_PIPE_A);
> +
> + haswell_set_cdclk(dev, req_cdclk);
> +
> + vlv_program_pfi_credits(dev_priv);
> +
> + intel_display_power_put(dev_priv, POWER_DOMAIN_PIPE_A);
> + }
> +
> +}
> +
> void hsw_disable_pc8(struct drm_i915_private *dev_priv)
> {
> struct drm_device *dev = dev_priv->dev;
> @@ -8792,6 +8939,8 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv)
> intel_prepare_ddi(dev);
> }
>
> +
> +
> static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
> struct intel_crtc_state *crtc_state)
> {
> @@ -11866,8 +12015,11 @@ static int __intel_set_mode(struct drm_crtc *crtc,
> * mode set on this crtc. For other crtcs we need to use the
> * adjusted_mode bits in the crtc directly.
> */
> - if (IS_VALLEYVIEW(dev)) {
> - valleyview_modeset_global_pipes(dev, &prepare_pipes);
> + if (IS_VALLEYVIEW(dev) || IS_HASWELL(dev)) {
> + if (IS_VALLEYVIEW(dev))
> + valleyview_modeset_global_pipes(dev, &prepare_pipes);
> + else
> + haswell_modeset_global_pipes(dev, &prepare_pipes);
>
> /* may have added more to prepare_pipes than we should */
> prepare_pipes &= ~disable_pipes;
> @@ -13892,6 +14044,9 @@ static void intel_init_display(struct drm_device *dev)
> dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
> } else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
> dev_priv->display.fdi_link_train = hsw_fdi_link_train;
> + if (IS_HASWELL(dev))
> + dev_priv->display.modeset_global_resources =
> + haswell_modeset_global_resources;
> } else if (IS_VALLEYVIEW(dev)) {
> dev_priv->display.modeset_global_resources =
> valleyview_modeset_global_resources;
More information about the Intel-gfx
mailing list