[Intel-gfx] [PATCH 1/3] drm/i915: DP link training optimization
Jani Nikula
jani.nikula at linux.intel.com
Wed Apr 8 05:46:37 PDT 2015
On Tue, 03 Mar 2015, Mika Kahola <mika.kahola at intel.com> wrote:
> This is a first of series patches that optimize DP link
> training. The first patch is for eDP only where we reuse
> the previously trained link training values from cache
> i.e. voltage swing and pre-emphasis levels.
>
> In case we are not able to train the link by reusing
> the known values, the link training parameters are set
> to zero and training is restarted.
Apologies for taking about forever and a half to get back to this. :(
See comments inline.
BR,
Jani.
>
> Signed-off-by: Mika Kahola <mika.kahola at intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 75 +++++++++++++++++++++++++++++++++++-----
> drivers/gpu/drm/i915/intel_drv.h | 1 +
> 2 files changed, 67 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index d1141d3..9497eb6 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -3294,6 +3294,25 @@ intel_dp_reset_link_train(struct intel_dp *intel_dp, uint32_t *DP,
> }
>
> static bool
> +intel_dp_reuse_link_train(struct intel_dp *intel_dp, uint32_t *DP,
> + uint8_t dp_train_pat)
> +{
> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> + struct drm_device *dev = intel_dig_port->base.base.dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> +
> + intel_dp_set_signal_levels(intel_dp, DP);
> +
> + I915_WRITE(intel_dp->output_reg, *DP);
> + POSTING_READ(intel_dp->output_reg);
> +
> + drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET,
> + intel_dp->train_set, intel_dp->lane_count);
> +
> + return intel_dp_set_link_train(intel_dp, DP, dp_train_pat);
> +}
So I'd think intel_dp_reuse_link_train should be exactly the same as
intel_dp_reset_link_train, except for the memset part. Maybe just look
at ->link_trained, and memset if not. And make sure you change
->link_trained at approapriate places *before* making the call.
> +
> +static bool
> intel_dp_update_link_train(struct intel_dp *intel_dp, uint32_t *DP,
> const uint8_t link_status[DP_LINK_STATUS_SIZE])
> {
> @@ -3356,6 +3375,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
> int voltage_tries, loop_tries;
> uint32_t DP = intel_dp->DP;
> uint8_t link_config[2];
> + uint8_t link_status[DP_LINK_STATUS_SIZE];
This is an unrelated change.
>
> if (HAS_DDI(dev))
> intel_ddi_prepare_link_retrain(encoder);
> @@ -3373,20 +3393,33 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
>
> DP |= DP_PORT_EN;
>
> - /* clock recovery */
> - if (!intel_dp_reset_link_train(intel_dp, &DP,
> - DP_TRAINING_PATTERN_1 |
> - DP_LINK_SCRAMBLING_DISABLE)) {
> - DRM_ERROR("failed to enable link training\n");
> - return;
> + /*
> + * check if eDP has already trained. Reset voltage swing and
> + * pre-emphasis levels if that's not the case.
> + */
> + if (intel_dp->link_trained) {
I know what you mean with ->link_trained, but I think the naming is
misleading. It doesn't mean we would have a link up and running. Maybe
it should be ->train_set_valid or something?
> + DRM_DEBUG_KMS("reuse current link train set\n");
> + if (!intel_dp_reuse_link_train(intel_dp, &DP,
> + DP_TRAINING_PATTERN_1 |
> + DP_LINK_SCRAMBLING_DISABLE)) {
> + DRM_DEBUG_KMS("failed to set link training\n");
> + return;
> + }
> + } else {
> + /* reset link training values */
> + DRM_DEBUG_KMS("reset link train set\n");
> + if (!intel_dp_reset_link_train(intel_dp, &DP,
> + DP_TRAINING_PATTERN_1 |
> + DP_LINK_SCRAMBLING_DISABLE)) {
> + DRM_ERROR("failed to enable link training\n");
> + return;
> + }
> }
>
> voltage = 0xff;
> voltage_tries = 0;
> loop_tries = 0;
> for (;;) {
> - uint8_t link_status[DP_LINK_STATUS_SIZE];
> -
> drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd);
> if (!intel_dp_get_link_status(intel_dp, link_status)) {
> DRM_ERROR("failed to get link status\n");
> @@ -3398,6 +3431,24 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
> break;
> }
>
> + /*
> + * if we used previously trained voltage and pre-emphasis values
> + * and we don't get clock recovery, reset link training values
> + */
> + if (intel_dp->link_trained) {
> + DRM_DEBUG_KMS("clock recovery not ok, reset");
> + if (!intel_dp_reset_link_train(intel_dp, &DP,
> + DP_TRAINING_PATTERN_1 |
> + DP_LINK_SCRAMBLING_DISABLE)) {
> + DRM_ERROR("failed to enable link training\n");
> + return;
> + }
> +
> + /* clear the flag as we are not reusing train set */
> + intel_dp->link_trained = false;
Do this first in case we bail out in the above error handling.
> + continue;
> + }
> +
> /* Check to see if we've tried the max voltage */
> for (i = 0; i < intel_dp->lane_count; i++)
> if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
> @@ -3475,6 +3526,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
>
> /* Make sure clock is still ok */
> if (!drm_dp_clock_recovery_ok(link_status, intel_dp->lane_count)) {
> + intel_dp->link_trained = false;
> intel_dp_start_link_train(intel_dp);
> intel_dp_set_link_train(intel_dp, &DP,
> training_pattern |
> @@ -3490,6 +3542,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
>
> /* Try 5 times, then try clock recovery if that fails */
> if (tries > 5) {
> + intel_dp->link_trained = false;
> intel_dp_start_link_train(intel_dp);
> intel_dp_set_link_train(intel_dp, &DP,
> training_pattern |
> @@ -3511,8 +3564,10 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
>
> intel_dp->DP = DP;
>
> - if (channel_eq)
> + if (channel_eq) {
> DRM_DEBUG_KMS("Channel EQ done. DP Training successful\n");
> + intel_dp->link_trained = is_edp(intel_dp);
> + }
>
> }
>
> @@ -4450,6 +4505,8 @@ intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool long_hpd)
> intel_display_power_get(dev_priv, power_domain);
>
> if (long_hpd) {
> + /* indicate that we need to restart link training */
> + intel_dp->link_trained = false;
>
> if (HAS_PCH_SPLIT(dev)) {
> if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 632df1c..f1e1318 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -668,6 +668,7 @@ struct intel_dp {
> bool has_aux_irq,
> int send_bytes,
> uint32_t aux_clock_divider);
> + bool link_trained;
> };
>
> struct intel_digital_port {
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list