[Intel-gfx] [PATCH 4/7] drm/i915: Use the default 600ns LDO programming sequence delay

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Not sure which LDO programming sequence delay should be used for the CHV
PHY, but the spec says that 600ns is "Used by default for initial
bringup", and the BIOS seems to use that, so let's do the same.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h         | 4 ++++
 drivers/gpu/drm/i915/intel_runtime_pm.c | 2 ++
 2 files changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 98588d5..977bad6 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1887,6 +1887,10 @@ enum skl_disp_power_wells {
 #define DPIO_PHY_STATUS			(VLV_DISPLAY_BASE + 0x6240)
 #define   DPLL_PORTD_READY_MASK		(0xf)
 #define DISPLAY_PHY_CONTROL (VLV_DISPLAY_BASE + 0x60100)
+#define   PHY_LDO_DELAY_0NS			0x0
+#define   PHY_LDO_DELAY_200NS			0x1
+#define   PHY_LDO_DELAY_600NS			0x2
+#define   PHY_LDO_SEQ_DELAY(delay, phy)		((delay) << (2*(phy)+23))
 #define   PHY_CH_SU_PSR				0x1
 #define   PHY_CH_DEEP_PSR			0x7
 #define   PHY_CH_POWER_MODE(mode, phy, ch)	((mode) << (6*(phy)+3*(ch)+2))
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 1f800f8..5cd8a51 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -1406,6 +1406,8 @@ static void chv_phy_control_init(struct drm_i915_private *dev_priv)
 	 * value.
 	 */
 	dev_priv->chv_phy_control =
+		PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY0) |
+		PHY_LDO_SEQ_DELAY(PHY_LDO_DELAY_600NS, DPIO_PHY1) |
 		PHY_CH_POWER_MODE(PHY_CH_SU_PSR, DPIO_PHY0, DPIO_CH0) |
 		PHY_CH_POWER_MODE(PHY_CH_SU_PSR, DPIO_PHY0, DPIO_CH1) |
 		PHY_CH_POWER_MODE(PHY_CH_SU_PSR, DPIO_PHY1, DPIO_CH0);
-- 
2.0.5