[Intel-gfx] [PATCH 05/11] drm/i915: Add a delay in Displayport AUX transactions for compliance testing

[Paulo Zanoni]

2015-04-10 13:12 GMT-03:00 Todd Previte <tprevite at gmail.com>:
> The Displayport Link Layer Compliance Testing Specification 1.2 rev 1.1
> specifies that repeated AUX transactions after a failure (no response /
> invalid response) must have a minimum delay of 400us before the resend can
> occur. Tests 4.2.1.1 and 4.2.1.2 are two tests that require this specifically.
>
> Also, the check for DP_AUX_CH_CTL_TIME_OUT_ERROR has been moved out into a
> separate case. This case just continues with the next iteration of the loop
> as the HW has already waited the required amount of time.
>
> V2:
> - Changed udelay() to usleep_range()
> V3:
> - Removed extraneous check for timeout
> - Updated comment to reflect this change
> V4:
> - Reformatted a comment
> V5:
> - Added separate check for HW timeout on AUX transactions. A message
>   is logged upon detection of this case.
> V6:
> - Add continue statement to HW timeout detect case
> - Remove the log message indicating a timeout has been
>   detected (review feedback)
> V7:
> - Updated the commit message to remove verbage about the HW timeout
>   case that is no longer valid.
>
> Signed-off-by: Todd Previte <tprevite at gmail.com>

Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com>

> ---
>  drivers/gpu/drm/i915/intel_dp.c | 13 +++++++++++--
>  1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index a5dfaff..77b6b15 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -877,9 +877,18 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
>                                    DP_AUX_CH_CTL_TIME_OUT_ERROR |
>                                    DP_AUX_CH_CTL_RECEIVE_ERROR);
>
> -                       if (status & (DP_AUX_CH_CTL_TIME_OUT_ERROR |
> -                                     DP_AUX_CH_CTL_RECEIVE_ERROR))
> +                       if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR)
>                                 continue;
> +
> +                       /* DP CTS 1.2 Core Rev 1.1, 4.2.1.1 & 4.2.1.2
> +                        *   400us delay required for errors and timeouts
> +                        *   Timeout errors from the HW already meet this
> +                        *   requirement so skip to next iteration
> +                        */
> +                       if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
> +                               usleep_range(400, 500);
> +                               continue;
> +                       }
>                         if (status & DP_AUX_CH_CTL_DONE)
>                                 break;
>                 }
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx



-- 
Paulo Zanoni