[Intel-gfx] [PATCH 5/5] drm/i915: Enable PSR by default.

[Rodrigo Vivi]

Hi Matthew,

Could you please check if you can reproduce your issue using this
branch: http://cgit.freedesktop.org/~vivijim/drm-intel/log/?h=intel_psr

Also,
1. What Platform are you using? BDW?
2. What desktop environment do you use?
3. What is your resolution?
4. Is IPS running?
5. Could you please grab dmesg with drm.debug=0xe?
6. Could you please paste a sequence of  cat
/sys/kernel/debug/dri/0/i915_edp_psr_status
when facing the fbcon and X issues?

Thanks in advance,
Rodrigo.

On Fri, Apr 10, 2015 at 3:05 PM, Matthew Garrett <mjg59 at srcf.ucam.org> wrote:
> I'm seeing the same behaviour with this patchset. After boot, X works
> fine but I get a rolling display on fbcon (the contents appear to be
> moving horizontally very quickly around the middle of the screen). If
> the screen is turned off and on again, X now only updates the screen
> once every second or so but fbcon works. If I suspend and resume, things
> go back to the working state until the next screen power cycle.
>
> --
> Matthew Garrett | mjg59 at srcf.ucam.org
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx



-- 
Rodrigo Vivi
Blog: http://blog.vivi.eng.br