[Intel-gfx] [PATCH 30/35] drm/i915: Use atomic helpers for computing changed flags
Ander Conselvan de Oliveira
ander.conselvan.de.oliveira at intel.com
Tue Apr 21 07:13:19 PDT 2015
Replace the drivers own logic for computing mode_changed, active_changed
and planes_changed flags with the check_modeset() atomic helper. Since
that function needs to compare the crtc's new mode with the current,
this patch also moves the set up of crtc_state->mode earlier in the call
chain.
Note that for the call to check_plane() to work properly, we need to
check new plane state against new crtc state. But since we still use the
plane update helper, which doesn't have a full atomic state, we need to
hack around that in intel_plane_atomic_check().
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira at intel.com>
---
drivers/gpu/drm/i915/intel_atomic_plane.c | 16 ++-
drivers/gpu/drm/i915/intel_display.c | 197 ++++++------------------------
2 files changed, 52 insertions(+), 161 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c
index 77462e1..86ba4b2 100644
--- a/drivers/gpu/drm/i915/intel_atomic_plane.c
+++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
@@ -111,6 +111,7 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
{
struct drm_crtc *crtc = state->crtc;
struct intel_crtc *intel_crtc;
+ struct intel_crtc_state *crtc_state;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_plane_state *intel_state = to_intel_plane_state(state);
@@ -126,6 +127,17 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
if (!crtc)
return 0;
+ /* FIXME: temporary hack necessary while we still use the plane update
+ * helper. */
+ if (state->state) {
+ crtc_state =
+ intel_atomic_get_crtc_state(state->state, intel_crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+ } else {
+ crtc_state = intel_crtc->config;
+ }
+
/*
* The original src/dest coordinates are stored in state->base, but
* we want to keep another copy internal to our driver that we can
@@ -144,9 +156,9 @@ static int intel_plane_atomic_check(struct drm_plane *plane,
intel_state->clip.x1 = 0;
intel_state->clip.y1 = 0;
intel_state->clip.x2 =
- intel_crtc->active ? intel_crtc->config->pipe_src_w : 0;
+ crtc_state->base.active ? crtc_state->pipe_src_w : 0;
intel_state->clip.y2 =
- intel_crtc->active ? intel_crtc->config->pipe_src_h : 0;
+ crtc_state->base.active ? crtc_state->pipe_src_h : 0;
/*
* Disabling a plane is always okay; we just need to update
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 55041bd..7667015 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -82,7 +82,7 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
static void ironlake_pch_clock_get(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
-static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
+static int intel_set_mode(struct drm_crtc *crtc,
struct drm_atomic_state *state);
static int intel_framebuffer_init(struct drm_device *dev,
struct intel_framebuffer *ifb,
@@ -9804,7 +9804,9 @@ retry:
if (ret)
goto fail;
- if (intel_set_mode(crtc, mode, state)) {
+ drm_mode_copy(&crtc_state->base.mode, mode);
+
+ if (intel_set_mode(crtc, state)) {
DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
if (old->release_fb)
old->release_fb->funcs->destroy(old->release_fb);
@@ -9878,7 +9880,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
if (ret)
goto fail;
- intel_set_mode(crtc, NULL, state);
+ intel_set_mode(crtc, state);
drm_atomic_state_free(state);
@@ -11388,7 +11390,6 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
static int
intel_modeset_pipe_config(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
struct drm_atomic_state *state,
struct intel_crtc_state *pipe_config)
{
@@ -11411,10 +11412,6 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
clear_intel_crtc_state(pipe_config);
- pipe_config->base.crtc = crtc;
- drm_mode_copy(&pipe_config->base.adjusted_mode, mode);
- drm_mode_copy(&pipe_config->base.mode, mode);
-
pipe_config->cpu_transcoder =
(enum transcoder) to_intel_crtc(crtc)->pipe;
pipe_config->shared_dpll = DPLL_ID_PRIVATE;
@@ -12111,27 +12108,8 @@ static void update_scanline_offset(struct intel_crtc *crtc)
crtc->scanline_offset = 1;
}
-static void
-intel_atomic_modeset_compute_changed_flags(struct drm_atomic_state *state,
- struct drm_crtc *modeset_crtc)
-{
- struct drm_crtc_state *crtc_state;
- struct drm_crtc *crtc;
- int i;
-
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (crtc_state->enable != crtc->state->enable)
- crtc_state->mode_changed = true;
-
- /* FIXME: Do we need to always set mode_changed for
- * modeset_crtc if it is enabled? modeset_affect_pipes()
- * did that. */
- }
-}
-
static struct intel_crtc_state *
intel_modeset_compute_config(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
struct drm_atomic_state *state)
{
struct intel_crtc_state *pipe_config;
@@ -12141,7 +12119,9 @@ intel_modeset_compute_config(struct drm_crtc *crtc,
if (ret)
return ERR_PTR(ret);
- intel_atomic_modeset_compute_changed_flags(state, crtc);
+ ret = drm_atomic_helper_check_modeset(state->dev, state);
+ if (ret)
+ return ERR_PTR(ret);
/*
* Note this needs changes when we start tracking multiple modes
@@ -12156,7 +12136,7 @@ intel_modeset_compute_config(struct drm_crtc *crtc,
if (!pipe_config->base.enable)
return pipe_config;
- ret = intel_modeset_pipe_config(crtc, mode, state, pipe_config);
+ ret = intel_modeset_pipe_config(crtc, state, pipe_config);
if (ret)
return ERR_PTR(ret);
@@ -12174,6 +12154,10 @@ intel_modeset_compute_config(struct drm_crtc *crtc,
intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config,"[modeset]");
+ ret = drm_atomic_helper_check_planes(state->dev, state);
+ if (ret)
+ return ERR_PTR(ret);
+
return pipe_config;
}
@@ -12249,7 +12233,6 @@ static int __intel_set_mode_checks(struct drm_atomic_state *state)
}
static int __intel_set_mode(struct drm_crtc *modeset_crtc,
- struct drm_display_mode *mode,
struct intel_crtc_state *pipe_config)
{
struct drm_device *dev = modeset_crtc->dev;
@@ -12292,7 +12275,7 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
* single crtc and mode.
*/
if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) {
- modeset_crtc->mode = *mode;
+ modeset_crtc->mode = pipe_config->base.mode;
/* mode_set/enable/disable functions rely on a correct pipe
* config. */
intel_crtc_set_state(to_intel_crtc(modeset_crtc), pipe_config);
@@ -12358,12 +12341,11 @@ static int __intel_set_mode(struct drm_crtc *modeset_crtc,
}
static int intel_set_mode_with_config(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
struct intel_crtc_state *pipe_config)
{
int ret;
- ret = __intel_set_mode(crtc, mode, pipe_config);
+ ret = __intel_set_mode(crtc, pipe_config);
if (ret == 0)
intel_modeset_check_state(crtc->dev);
@@ -12372,19 +12354,18 @@ static int intel_set_mode_with_config(struct drm_crtc *crtc,
}
static int intel_set_mode(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
struct drm_atomic_state *state)
{
struct intel_crtc_state *pipe_config;
int ret = 0;
- pipe_config = intel_modeset_compute_config(crtc, mode, state);
+ pipe_config = intel_modeset_compute_config(crtc, state);
if (IS_ERR(pipe_config)) {
ret = PTR_ERR(pipe_config);
goto out;
}
- ret = intel_set_mode_with_config(crtc, mode, pipe_config);
+ ret = intel_set_mode_with_config(crtc, pipe_config);
if (ret)
goto out;
@@ -12451,125 +12432,21 @@ void intel_crtc_restore_mode(struct drm_crtc *crtc)
}
crtc_state->base.enable = intel_crtc->new_enabled;
+
+ if (&intel_crtc->base == crtc)
+ drm_mode_copy(&crtc_state->base.mode, &crtc->mode);
}
intel_modeset_setup_plane_state(state, crtc, &crtc->mode,
crtc->primary->fb, crtc->x, crtc->y);
- intel_set_mode(crtc, &crtc->mode, state);
+ intel_set_mode(crtc, state);
drm_atomic_state_free(state);
}
#undef for_each_intel_crtc_masked
-static bool
-is_crtc_connector_off(struct drm_mode_set *set)
-{
- int i;
-
- if (set->num_connectors == 0)
- return false;
-
- if (WARN_ON(set->connectors == NULL))
- return false;
-
- for (i = 0; i < set->num_connectors; i++)
- if (set->connectors[i]->encoder &&
- set->connectors[i]->encoder->crtc == set->crtc &&
- set->connectors[i]->dpms != DRM_MODE_DPMS_ON)
- return true;
-
- return false;
-}
-
-static void
-intel_set_config_compute_mode_changes(struct drm_mode_set *set,
- struct intel_crtc_state *pipe_config)
-{
- struct drm_atomic_state *state;
- struct drm_connector *connector;
- struct drm_connector_state *connector_state;
- struct drm_crtc *crtc;
- struct drm_crtc_state *crtc_state;
- int i;
-
- /* We should be able to check here if the fb has the same properties
- * and then just flip_or_move it */
- if (is_crtc_connector_off(set)) {
- pipe_config->base.mode_changed = true;
- } else if (set->crtc->primary->fb != set->fb) {
- /*
- * If we have no fb, we can only flip as long as the crtc is
- * active, otherwise we need a full mode set. The crtc may
- * be active if we've only disabled the primary plane, or
- * in fastboot situations.
- */
- if (set->crtc->primary->fb == NULL) {
- struct intel_crtc *intel_crtc =
- to_intel_crtc(set->crtc);
-
- if (intel_crtc->active) {
- DRM_DEBUG_KMS("crtc has no fb, will flip\n");
- pipe_config->base.planes_changed = true;
- } else {
- DRM_DEBUG_KMS("inactive crtc, full mode set\n");
- pipe_config->base.mode_changed = true;
- }
- } else if (set->fb == NULL) {
- pipe_config->base.mode_changed = true;
- } else if (set->fb->pixel_format !=
- set->crtc->primary->fb->pixel_format) {
- pipe_config->base.mode_changed = true;
- } else {
- pipe_config->base.planes_changed = true;
- }
- }
-
- if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y))
- pipe_config->base.planes_changed = true;
-
- if (set->mode && !drm_mode_equal(set->mode, &set->crtc->mode)) {
- DRM_DEBUG_KMS("modes are different, full mode set\n");
- drm_mode_debug_printmodeline(&set->crtc->mode);
- drm_mode_debug_printmodeline(set->mode);
- pipe_config->base.mode_changed = true;
- }
-
- state = pipe_config->base.state;
-
- for_each_connector_in_state(state, connector, connector_state, i) {
- if (connector_state->best_encoder !=
- connector->state->best_encoder) {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] encoder changed, full mode switch\n",
- connector->base.id,
- connector->name);
- pipe_config->base.mode_changed = true;
- }
-
- if (connector_state->crtc != connector->state->crtc) {
- DRM_DEBUG_KMS("[CONNECTOR:%d:%s] crtc changed, full mode switch\n",
- connector->base.id,
- connector->name);
- pipe_config->base.mode_changed = true;
- }
- }
-
- for_each_crtc_in_state(state, crtc, crtc_state, i) {
- if (crtc_state->enable == crtc->state->enable)
- continue;
-
- DRM_DEBUG_KMS("[CRTC:%d] %sabled, full mode switch\n",
- crtc->base.id,
- crtc_state->enable ? "en" : "dis");
- pipe_config->base.mode_changed = true;
- }
-
- DRM_DEBUG_KMS("computed changes for [CRTC:%d], mode_changed=%d, fb_changed=%d\n",
- set->crtc->base.id, pipe_config->base.mode_changed,
- pipe_config->base.planes_changed);
-}
-
static bool intel_connector_in_mode_set(struct intel_connector *connector,
struct drm_mode_set *set)
{
@@ -12686,6 +12563,21 @@ intel_modeset_stage_output_state(struct drm_device *dev,
crtc_state->enable = drm_atomic_connectors_for_crtc(state, crtc);
}
+ ret = intel_modeset_setup_plane_state(state, set->crtc, set->mode,
+ set->fb, set->x, set->y);
+ if (ret)
+ return ret;
+
+ crtc_state = drm_atomic_get_crtc_state(state, set->crtc);
+ if (IS_ERR(crtc_state))
+ return PTR_ERR(crtc_state);
+
+ if (set->mode)
+ drm_mode_copy(&crtc_state->mode, set->mode);
+
+ if (set->num_connectors)
+ crtc_state->active = true;
+
return 0;
}
@@ -12733,30 +12625,17 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
if (ret)
goto out;
- ret = intel_modeset_setup_plane_state(state, set->crtc, set->mode,
- set->fb, set->x, set->y);
- if (ret)
- goto out;
-
- pipe_config = intel_modeset_compute_config(set->crtc, set->mode,
- state);
+ pipe_config = intel_modeset_compute_config(set->crtc, state);
if (IS_ERR(pipe_config)) {
ret = PTR_ERR(pipe_config);
goto out;
}
- /* Compute whether we need a full modeset, only an fb base update or no
- * change at all. In the future we might also check whether only the
- * mode changed, e.g. for LVDS where we only change the panel fitter in
- * such cases. */
- intel_set_config_compute_mode_changes(set, pipe_config);
-
intel_update_pipe_size(to_intel_crtc(set->crtc));
primary_plane_was_visible = primary_plane_visible(set->crtc);
- ret = intel_set_mode_with_config(set->crtc, set->mode,
- pipe_config);
+ ret = intel_set_mode_with_config(set->crtc, pipe_config);
if (ret == 0 &&
pipe_config->base.enable &&
--
2.1.0
More information about the Intel-gfx
mailing list