[Intel-gfx] [PATCH 2/5] drm: Add edid_corrupt flag for Displayport Link CTS 4.2.2.6
Alex Deucher
alexdeucher at gmail.com
Wed Apr 22 13:20:21 PDT 2015
On Tue, Apr 21, 2015 at 2:09 PM, Todd Previte <tprevite at gmail.com> wrote:
> Displayport compliance test 4.2.2.6 requires that a source device be capable of
> detecting a corrupt EDID. The test specification states that the sink device
> sets up the EDID with an invalid checksum. To do this, the sink sets up an
> invalid EDID header, expecting the source device to generate the checksum and
> compare it to the value stored in the last byte of the block data.
>
> Unfortunately, the DRM EDID reading and parsing functions are actually too good
> in this case; the header is fixed before the checksum is computed and thus the
> test never sees the invalid checksum. This results in a failure to pass the
> compliance test.
>
> To correct this issue, when the EDID code detects that the header is invalid,
> a flag is set to indicate that the EDID is corrupted. In this case, it sets
> edid_corrupt flag and continues with its fix-up code. This flag is also set in
> the case of a more seriously damaged header (fixup score less than the
> threshold). For consistency, the edid_corrupt flag is also set when the
> checksum is invalid as well.
>
> V2:
> - Removed the static bool global
> - Added a bool to the drm_connector struct to reaplce the static one for
> holding the status of raw edid header corruption detection
> - Modified the function signature of the is_valid function to take an
> additional parameter to store the corruption detected value
> - Fixed the other callers of the above is_valid function
> V3:
> - Updated the commit message to be more clear about what and why this
> patch does what it does.
> - Added comment in code to clarify the operations there
> - Removed compliance variable and check_link_status update; those
> have been moved to a later patch
> - Removed variable assignment from the bottom of the test handler
> V4:
> - Removed i915 tag from subject line as the patch is not i915-specific
> V5:
> - Moved code causing a compilation error to this patch where the variable
> is actually declared
> - Maintained blank lines / spacing so as to not contaminate the patch
> V6:
> - Removed extra debug messages
> - Added documentation to for the added parameter on drm_edid_block_valid
> - Fixed more whitespace issues in check_link_status
> - Added a clear of the header_corrupt flag to the end of the test handler
> in intel_dp.c
> - Changed the usage of the new function prototype in several places to use
> NULL where it is not needed by compliance testing
> V7:
> - Updated to account for long_pulse flag propagation
> V8:
> - Removed clearing of header_corrupt flag from the test handler in intel_dp.c
> - Added clearing of header_corrupt flag in the drm_edid_block_valid function
> V9:
> - Renamed header_corrupt flag to edid_corrupt to more accurately reflect its
> value and purpose
> - Updated commit message
> V10:
> - Updated for versioning and patch swizzle
> - Revised the title to more accurately reflect the nature and contents of
> the patch
> - Fixed formatting/whitespace problems
> - Added set flag when computed checksum is invalid
>
> Signed-off-by: Todd Previte <tprevite at gmail.com>
> Cc: dri-devel at lists.freedesktop.org
Seems reasonable.
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
> ---
> drivers/gpu/drm/drm_edid.c | 32 ++++++++++++++++++++++++++------
> drivers/gpu/drm/drm_edid_load.c | 7 +++++--
> include/drm/drm_crtc.h | 8 +++++++-
> 3 files changed, 38 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 53bc7a6..be6713c 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -1041,13 +1041,15 @@ static bool drm_edid_is_zero(const u8 *in_edid, int length)
> * @raw_edid: pointer to raw EDID block
> * @block: type of block to validate (0 for base, extension otherwise)
> * @print_bad_edid: if true, dump bad EDID blocks to the console
> + * @edid_corrupt: if true, the header or checksum is invalid
> *
> * Validate a base or extension EDID block and optionally dump bad blocks to
> * the console.
> *
> * Return: True if the block is valid, false otherwise.
> */
> -bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid)
> +bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid,
> + bool *edid_corrupt)
> {
> u8 csum;
> struct edid *edid = (struct edid *)raw_edid;
> @@ -1060,11 +1062,22 @@ bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid)
>
> if (block == 0) {
> int score = drm_edid_header_is_valid(raw_edid);
> - if (score == 8) ;
> - else if (score >= edid_fixup) {
> + if (score == 8) {
> + if (edid_corrupt)
> + *edid_corrupt = 0;
> + } else if (score >= edid_fixup) {
> + /* Displayport Link CTS Core 1.2 rev1.1 test 4.2.2.6
> + * The corrupt flag needs to be set here otherwise, the
> + * fix-up code here will correct the problem, the
> + * checksum is correct and the test fails
> + */
> + if (edid_corrupt)
> + *edid_corrupt = 1;
> DRM_DEBUG("Fixing EDID header, your hardware may be failing\n");
> memcpy(raw_edid, edid_header, sizeof(edid_header));
> } else {
> + if (edid_corrupt)
> + *edid_corrupt = 1;
> goto bad;
> }
> }
> @@ -1075,6 +1088,9 @@ bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid)
> DRM_ERROR("EDID checksum is invalid, remainder is %d\n", csum);
> }
>
> + if (edid_corrupt)
> + *edid_corrupt = 1;
> +
> /* allow CEA to slide through, switches mangle this */
> if (raw_edid[0] != 0x02)
> goto bad;
> @@ -1129,7 +1145,7 @@ bool drm_edid_is_valid(struct edid *edid)
> return false;
>
> for (i = 0; i <= edid->extensions; i++)
> - if (!drm_edid_block_valid(raw + i * EDID_LENGTH, i, true))
> + if (!drm_edid_block_valid(raw + i * EDID_LENGTH, i, true, NULL))
> return false;
>
> return true;
> @@ -1232,7 +1248,8 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
> for (i = 0; i < 4; i++) {
> if (get_edid_block(data, block, 0, EDID_LENGTH))
> goto out;
> - if (drm_edid_block_valid(block, 0, print_bad_edid))
> + if (drm_edid_block_valid(block, 0, print_bad_edid,
> + &connector->edid_corrupt))
> break;
> if (i == 0 && drm_edid_is_zero(block, EDID_LENGTH)) {
> connector->null_edid_counter++;
> @@ -1257,7 +1274,10 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
> block + (valid_extensions + 1) * EDID_LENGTH,
> j, EDID_LENGTH))
> goto out;
> - if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH, j, print_bad_edid)) {
> + if (drm_edid_block_valid(block + (valid_extensions + 1)
> + * EDID_LENGTH, j,
> + print_bad_edid,
> + NULL)) {
> valid_extensions++;
> break;
> }
> diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c
> index 4c0aa97..c5605fe 100644
> --- a/drivers/gpu/drm/drm_edid_load.c
> +++ b/drivers/gpu/drm/drm_edid_load.c
> @@ -216,7 +216,8 @@ static void *edid_load(struct drm_connector *connector, const char *name,
> goto out;
> }
>
> - if (!drm_edid_block_valid(edid, 0, print_bad_edid)) {
> + if (!drm_edid_block_valid(edid, 0, print_bad_edid,
> + &connector->edid_corrupt)) {
> connector->bad_edid_counter++;
> DRM_ERROR("Base block of EDID firmware \"%s\" is invalid ",
> name);
> @@ -229,7 +230,9 @@ static void *edid_load(struct drm_connector *connector, const char *name,
> if (i != valid_extensions + 1)
> memcpy(edid + (valid_extensions + 1) * EDID_LENGTH,
> edid + i * EDID_LENGTH, EDID_LENGTH);
> - if (drm_edid_block_valid(edid + i * EDID_LENGTH, i, print_bad_edid))
> + if (drm_edid_block_valid(edid + i * EDID_LENGTH, i,
> + print_bad_edid,
> + NULL))
> valid_extensions++;
> }
>
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index d4e4b82..8bc2724 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -719,6 +719,11 @@ struct drm_connector {
> int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
> unsigned bad_edid_counter;
>
> + /* Flag for raw EDID header corruption - used in Displayport
> + * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6
> + */
> + bool edid_corrupt;
> +
> struct dentry *debugfs_entry;
>
> struct drm_connector_state *state;
> @@ -1443,7 +1448,8 @@ extern void drm_set_preferred_mode(struct drm_connector *connector,
> int hpref, int vpref);
>
> extern int drm_edid_header_is_valid(const u8 *raw_edid);
> -extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid);
> +extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid,
> + bool *edid_corrupt);
> extern bool drm_edid_is_valid(struct edid *edid);
>
> extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
> --
> 1.9.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the Intel-gfx
mailing list