[Intel-gfx] [PATCH 13/14] drm/i915: skylake primary plane scaling using shared scalers
Konduru, Chandra
chandra.konduru at intel.com
Wed Apr 29 09:26:24 PDT 2015
> -----Original Message-----
> From: Jani Nikula [mailto:jani.nikula at linux.intel.com]
> Sent: Wednesday, April 29, 2015 5:13 AM
> To: Konduru, Chandra; intel-gfx at lists.freedesktop.org; Roper, Matthew D
> Cc: Vetter, Daniel; Conselvan De Oliveira, Ander
> Subject: Re: [Intel-gfx] [PATCH 13/14] drm/i915: skylake primary plane scaling
> using shared scalers
>
> On Mon, 27 Apr 2015, Chandra Konduru <chandra.konduru at intel.com> wrote:
> > This patch enables skylake primary plane scaling using shared scalers
> > atomic desgin.
> >
> > v2:
> > -use single copy of scaler limits (Matt)
> >
> > v3:
> > -move detach_scalers to crtc commit path (Matt) -use values in
> > plane_state->src as regular integers (me)
> >
> > v4:
> > -changes to align with updated scaler structures (Matt, me) -keep
> > plane src rect in 16.16 format (Matt, Daniel)
> >
> > v5:
> > -Rebased on top of 90/270 rotation changes (me) -Fixed an issue
> > introduced by 90/270 changes where plane programming is using
> > drm_plane->state rect instead of intel_plane->state rect.
> > This change also required for scaling to work properly. (me) -With
> > 90/270, updated limits to cover both portrait and landscape usages
> > (me) -Refactored skylake_update_primary_plane to reduce its size
> > (Daniel) Added helper functions for refactoring are comprehended
> > enough to be used for skylake_update_plane (for sprite) too. One stop
> > towards having single function for all planes.
> >
> > v6:
> > -Added fixme note when checking plane_state->src width in update_plane
> > (Daniel) -Release lock when failing to colorkey request with active
> > scaler (Daniel)
> >
> > Signed-off-by: Chandra Konduru <chandra.konduru at intel.com>
> > Reviewed-by: matthew.d.roper at intel.com
>
> Matt, I never saw an explicit r-b from you for this patch, and there were also
> plenty of recent changes. Does your r-b still hold?
>
> Chandra, an earlier version of the patch has Testcase: kms_plane_scaling but
> this one doesn't. Does that test now do what Daniel requested in [1]?
Hi Jani,
Yes, same kms_plane_scaling is applicable. In patch creation, missed to add back the line:
Testcase: kms_plane_scaling
Regarding review, Matt reviewed until v4.
For v5: changes are related to rebasing for 90/270, and Matt's suggestion was
to get it reviewed from 90/270 owner (Sonika). Got R-b for v5 changes from her.
For v6- it is adding a comment and addressing lock issue; nothing new added.
I have sent a patch to update kms_plane_scaling but need some minor updates
to address review feedback. I think, that shouldn't block merge of remaining scaler
patches.
>
> BR,
> Jani.
>
>
> [1] http://mid.gmane.org/20150413181245.GC6092@phenom.ffwll.local
>
> > Reviewed-by: sonika.jindal at intel.com (v5)
> > ---
> > drivers/gpu/drm/i915/intel_atomic.c | 5 +-
> > drivers/gpu/drm/i915/intel_display.c | 266 +++++++++++++++++++++++++----
> -----
> > drivers/gpu/drm/i915/intel_drv.h | 8 +-
> > drivers/gpu/drm/i915/intel_sprite.c | 10 ++
> > 4 files changed, 219 insertions(+), 70 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_atomic.c
> > b/drivers/gpu/drm/i915/intel_atomic.c
> > index 3c4b7cd..cb6d5f2 100644
> > --- a/drivers/gpu/drm/i915/intel_atomic.c
> > +++ b/drivers/gpu/drm/i915/intel_atomic.c
> > @@ -169,7 +169,7 @@ int intel_atomic_commit(struct drm_device *dev,
> > plane->state->state = NULL;
> > }
> >
> > - /* swap crtc_state */
> > + /* swap crtc_scaler_state */
> > for (i = 0; i < dev->mode_config.num_crtc; i++) {
> > struct drm_crtc *crtc = state->crtcs[i];
> > if (!crtc) {
> > @@ -178,6 +178,9 @@ int intel_atomic_commit(struct drm_device *dev,
> >
> > to_intel_crtc(crtc)->config->scaler_state =
> > to_intel_crtc_state(state->crtc_states[i])->scaler_state;
> > +
> > + if (INTEL_INFO(dev)->gen >= 9)
> > + skl_detach_scalers(to_intel_crtc(crtc));
> > }
> >
> > drm_atomic_helper_commit_planes(dev, state); diff --git
> > a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index 5f7a40f..22799fb 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -2960,126 +2960,204 @@ void skl_detach_scalers(struct intel_crtc
> *intel_crtc)
> > }
> > }
> >
> > -static void skylake_update_primary_plane(struct drm_crtc *crtc,
> > - struct drm_framebuffer *fb,
> > - int x, int y)
> > +u32 skl_plane_ctl_format(uint32_t pixel_format)
> > {
> > - struct drm_device *dev = crtc->dev;
> > - struct drm_i915_private *dev_priv = dev->dev_private;
> > - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > - struct drm_i915_gem_object *obj;
> > - int pipe = intel_crtc->pipe;
> > - u32 plane_ctl, stride_div, stride;
> > - u32 tile_height, plane_offset, plane_size;
> > - unsigned int rotation;
> > - int x_offset, y_offset;
> > - unsigned long surf_addr;
> > - struct drm_plane *plane;
> > -
> > - if (!intel_crtc->primary_enabled) {
> > - I915_WRITE(PLANE_CTL(pipe, 0), 0);
> > - I915_WRITE(PLANE_SURF(pipe, 0), 0);
> > - POSTING_READ(PLANE_CTL(pipe, 0));
> > - return;
> > - }
> > -
> > - plane_ctl = PLANE_CTL_ENABLE |
> > - PLANE_CTL_PIPE_GAMMA_ENABLE |
> > - PLANE_CTL_PIPE_CSC_ENABLE;
> > -
> > - switch (fb->pixel_format) {
> > + u32 plane_ctl_format = 0;
> > + switch (pixel_format) {
> > case DRM_FORMAT_RGB565:
> > - plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
> > - break;
> > - case DRM_FORMAT_XRGB8888:
> > - plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
> > - break;
> > - case DRM_FORMAT_ARGB8888:
> > - plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
> > - plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
> > + plane_ctl_format = PLANE_CTL_FORMAT_RGB_565;
> > break;
> > case DRM_FORMAT_XBGR8888:
> > - plane_ctl |= PLANE_CTL_ORDER_RGBX;
> > - plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
> > + plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888 |
> > +PLANE_CTL_ORDER_RGBX;
> > break;
> > + case DRM_FORMAT_XRGB8888:
> > + plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888;
> > + break;
> > + /*
> > + * XXX: For ARBG/ABGR formats we default to expecting scanout buffers
> > + * to be already pre-multiplied. We need to add a knob (or a different
> > + * DRM_FORMAT) for user-space to configure that.
> > + */
> > case DRM_FORMAT_ABGR8888:
> > - plane_ctl |= PLANE_CTL_ORDER_RGBX;
> > - plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
> > - plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
> > + plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888 |
> PLANE_CTL_ORDER_RGBX |
> > + PLANE_CTL_ALPHA_SW_PREMULTIPLY;
> > + break;
> > + case DRM_FORMAT_ARGB8888:
> > + plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888 |
> > + PLANE_CTL_ALPHA_SW_PREMULTIPLY;
> > break;
> > case DRM_FORMAT_XRGB2101010:
> > - plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
> > + plane_ctl_format = PLANE_CTL_FORMAT_XRGB_2101010;
> > break;
> > case DRM_FORMAT_XBGR2101010:
> > - plane_ctl |= PLANE_CTL_ORDER_RGBX;
> > - plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
> > + plane_ctl_format = PLANE_CTL_ORDER_RGBX |
> PLANE_CTL_FORMAT_XRGB_2101010;
> > + break;
> > + case DRM_FORMAT_YUYV:
> > + plane_ctl_format = PLANE_CTL_FORMAT_YUV422 |
> PLANE_CTL_YUV422_YUYV;
> > + break;
> > + case DRM_FORMAT_YVYU:
> > + plane_ctl_format = PLANE_CTL_FORMAT_YUV422 |
> PLANE_CTL_YUV422_YVYU;
> > + break;
> > + case DRM_FORMAT_UYVY:
> > + plane_ctl_format = PLANE_CTL_FORMAT_YUV422 |
> PLANE_CTL_YUV422_UYVY;
> > + break;
> > + case DRM_FORMAT_VYUY:
> > + plane_ctl_format = PLANE_CTL_FORMAT_YUV422 |
> PLANE_CTL_YUV422_VYUY;
> > break;
> > default:
> > BUG();
> > }
> > + return plane_ctl_format;
> > +}
> >
> > - switch (fb->modifier[0]) {
> > +u32 skl_plane_ctl_tiling(uint64_t fb_modifier) {
> > + u32 plane_ctl_tiling = 0;
> > + switch (fb_modifier) {
> > case DRM_FORMAT_MOD_NONE:
> > break;
> > case I915_FORMAT_MOD_X_TILED:
> > - plane_ctl |= PLANE_CTL_TILED_X;
> > + plane_ctl_tiling = PLANE_CTL_TILED_X;
> > break;
> > case I915_FORMAT_MOD_Y_TILED:
> > - plane_ctl |= PLANE_CTL_TILED_Y;
> > + plane_ctl_tiling = PLANE_CTL_TILED_Y;
> > break;
> > case I915_FORMAT_MOD_Yf_TILED:
> > - plane_ctl |= PLANE_CTL_TILED_YF;
> > + plane_ctl_tiling = PLANE_CTL_TILED_YF;
> > break;
> > default:
> > - MISSING_CASE(fb->modifier[0]);
> > + MISSING_CASE(fb_modifier);
> > }
> > + return plane_ctl_tiling;
> > +}
> >
> > - plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
> > -
> > - plane = crtc->primary;
> > - rotation = plane->state->rotation;
> > +u32 skl_plane_ctl_rotation(unsigned int rotation) {
> > + u32 plane_ctl_rotation = 0;
> > switch (rotation) {
> > + case BIT(DRM_ROTATE_0):
> > + break;
> > case BIT(DRM_ROTATE_90):
> > - plane_ctl |= PLANE_CTL_ROTATE_90;
> > + plane_ctl_rotation = PLANE_CTL_ROTATE_90;
> > break;
> > -
> > case BIT(DRM_ROTATE_180):
> > - plane_ctl |= PLANE_CTL_ROTATE_180;
> > + plane_ctl_rotation = PLANE_CTL_ROTATE_180;
> > break;
> > -
> > case BIT(DRM_ROTATE_270):
> > - plane_ctl |= PLANE_CTL_ROTATE_270;
> > + plane_ctl_rotation = PLANE_CTL_ROTATE_270;
> > break;
> > + default:
> > + MISSING_CASE(rotation);
> > }
> >
> > + return plane_ctl_rotation;
> > +}
> > +
> > +static void skylake_update_primary_plane(struct drm_crtc *crtc,
> > + struct drm_framebuffer *fb,
> > + int x, int y)
> > +{
> > + struct drm_device *dev = crtc->dev;
> > + struct drm_i915_private *dev_priv = dev->dev_private;
> > + struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> > + struct drm_i915_gem_object *obj;
> > + int pipe = intel_crtc->pipe;
> > + u32 plane_ctl, stride_div, stride;
> > + u32 tile_height, plane_offset, plane_size;
> > + unsigned int rotation;
> > + int x_offset, y_offset;
> > + unsigned long surf_addr;
> > + struct drm_plane *plane;
> > + struct intel_crtc_state *crtc_state = intel_crtc->config;
> > + struct intel_plane_state *plane_state;
> > + int src_x = 0, src_y = 0, src_w = 0, src_h = 0;
> > + int dst_x = 0, dst_y = 0, dst_w = 0, dst_h = 0;
> > + int scaler_id = -1;
> > +
> > + plane = crtc->primary;
> > + plane_state = to_intel_plane_state(plane->state);
> > +
> > + if (!intel_crtc->primary_enabled) {
> > + I915_WRITE(PLANE_CTL(pipe, 0), 0);
> > + I915_WRITE(PLANE_SURF(pipe, 0), 0);
> > + POSTING_READ(PLANE_CTL(pipe, 0));
> > + return;
> > + }
> > +
> > + plane_ctl = PLANE_CTL_ENABLE |
> > + PLANE_CTL_PIPE_GAMMA_ENABLE |
> > + PLANE_CTL_PIPE_CSC_ENABLE;
> > +
> > + plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
> > + plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
> > + plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
> > +
> > + rotation = plane->state->rotation;
> > + plane_ctl |= skl_plane_ctl_rotation(rotation);
> > +
> > obj = intel_fb_obj(fb);
> > stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
> > fb->pixel_format);
> > surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj);
> >
> > + /*
> > + * FIXME: intel_plane_state->src, dst aren't set when transitional
> > + * update_plane helpers are called from legacy paths.
> > + * Once full atomic crtc is available, below check can be avoided.
> > + */
> > + if (drm_rect_width(&plane_state->src)) {
> > + scaler_id = plane_state->scaler_id;
> > + src_x = plane_state->src.x1 >> 16;
> > + src_y = plane_state->src.y1 >> 16;
> > + src_w = drm_rect_width(&plane_state->src) >> 16;
> > + src_h = drm_rect_height(&plane_state->src) >> 16;
> > + dst_x = plane_state->dst.x1;
> > + dst_y = plane_state->dst.y1;
> > + dst_w = drm_rect_width(&plane_state->dst);
> > + dst_h = drm_rect_height(&plane_state->dst);
> > +
> > + WARN_ON(x != src_x || y != src_y);
> > + } else {
> > + src_w = intel_crtc->config->pipe_src_w;
> > + src_h = intel_crtc->config->pipe_src_h;
> > + }
> > +
> > if (intel_rotation_90_or_270(rotation)) {
> > /* stride = Surface height in tiles */
> > tile_height = intel_tile_height(dev, fb->bits_per_pixel,
> > fb->modifier[0]);
> > stride = DIV_ROUND_UP(fb->height, tile_height);
> > - x_offset = stride * tile_height - y - (plane->state->src_h >> 16);
> > + x_offset = stride * tile_height - y - src_h;
> > y_offset = x;
> > - plane_size = ((plane->state->src_w >> 16) - 1) << 16 |
> > - ((plane->state->src_h >> 16) - 1);
> > + plane_size = (src_w - 1) << 16 | (src_h - 1);
> > } else {
> > stride = fb->pitches[0] / stride_div;
> > x_offset = x;
> > y_offset = y;
> > - plane_size = ((plane->state->src_h >> 16) - 1) << 16 |
> > - ((plane->state->src_w >> 16) - 1);
> > + plane_size = (src_h - 1) << 16 | (src_w - 1);
> > }
> > plane_offset = y_offset << 16 | x_offset;
> >
> > I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
> > - I915_WRITE(PLANE_POS(pipe, 0), 0);
> > I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
> > I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
> > I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
> > +
> > + if (scaler_id >= 0) {
> > + uint32_t ps_ctrl = 0;
> > +
> > + WARN_ON(!dst_w || !dst_h);
> > + ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
> > + crtc_state->scaler_state.scalers[scaler_id].mode;
> > + I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
> > + I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
> > + I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) |
> dst_y);
> > + I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) |
> dst_h);
> > + I915_WRITE(PLANE_POS(pipe, 0), 0);
> > + } else {
> > + I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
> > + }
> > +
> > I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
> >
> > POSTING_READ(PLANE_SURF(pipe, 0));
> > @@ -4338,6 +4416,7 @@ skl_update_scaler_users(
> > int *scaler_id;
> > struct drm_framebuffer *fb;
> > struct intel_crtc_scaler_state *scaler_state;
> > + unsigned int rotation;
> >
> > if (!intel_crtc || !crtc_state)
> > return 0;
> > @@ -4353,6 +4432,7 @@ skl_update_scaler_users(
> > dst_w = drm_rect_width(&plane_state->dst);
> > dst_h = drm_rect_height(&plane_state->dst);
> > scaler_id = &plane_state->scaler_id;
> > + rotation = plane_state->base.rotation;
> > } else {
> > struct drm_display_mode *adjusted_mode =
> > &crtc_state->base.adjusted_mode;
> > @@ -4361,8 +4441,12 @@ skl_update_scaler_users(
> > dst_w = adjusted_mode->hdisplay;
> > dst_h = adjusted_mode->vdisplay;
> > scaler_id = &scaler_state->scaler_id;
> > + rotation = DRM_ROTATE_0;
> > }
> > - need_scaling = (src_w != dst_w || src_h != dst_h);
> > +
> > + need_scaling = intel_rotation_90_or_270(rotation) ?
> > + (src_h != dst_w || src_w != dst_h):
> > + (src_w != dst_w || src_h != dst_h);
> >
> > /*
> > * if plane is being disabled or scaler is no more required or force
> > detach @@ -12805,6 +12889,36 @@ intel_cleanup_plane_fb(struct
> drm_plane *plane,
> > }
> > }
> >
> > +int
> > +skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state
> > +*crtc_state) {
> > + int max_scale;
> > + struct drm_device *dev;
> > + struct drm_i915_private *dev_priv;
> > + int crtc_clock, cdclk;
> > +
> > + if (!intel_crtc || !crtc_state)
> > + return DRM_PLANE_HELPER_NO_SCALING;
> > +
> > + dev = intel_crtc->base.dev;
> > + dev_priv = dev->dev_private;
> > + crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
> > + cdclk = dev_priv->display.get_display_clock_speed(dev);
> > +
> > + if (!crtc_clock || !cdclk)
> > + return DRM_PLANE_HELPER_NO_SCALING;
> > +
> > + /*
> > + * skl max scale is lower of:
> > + * close to 3 but not 3, -1 is for that purpose
> > + * or
> > + * cdclk/crtc_clock
> > + */
> > + max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) /
> > +crtc_clock));
> > +
> > + return max_scale;
> > +}
> > +
> > static int
> > intel_check_primary_plane(struct drm_plane *plane,
> > struct intel_plane_state *state) @@ -12813,23
> +12927,31 @@
> > intel_check_primary_plane(struct drm_plane *plane,
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct drm_crtc *crtc = state->base.crtc;
> > struct intel_crtc *intel_crtc;
> > + struct intel_crtc_state *crtc_state;
> > struct drm_framebuffer *fb = state->base.fb;
> > struct drm_rect *dest = &state->dst;
> > struct drm_rect *src = &state->src;
> > const struct drm_rect *clip = &state->clip;
> > bool can_position = false;
> > + int max_scale = DRM_PLANE_HELPER_NO_SCALING;
> > + int min_scale = DRM_PLANE_HELPER_NO_SCALING;
> > int ret;
> >
> > crtc = crtc ? crtc : plane->crtc;
> > intel_crtc = to_intel_crtc(crtc);
> > + crtc_state = state->base.state ?
> > + intel_atomic_get_crtc_state(state->base.state, intel_crtc) :
> NULL;
> >
> > - if (INTEL_INFO(dev)->gen >= 9)
> > + if (INTEL_INFO(dev)->gen >= 9) {
> > + min_scale = 1;
> > + max_scale = skl_max_scale(intel_crtc, crtc_state);
> > can_position = true;
> > + }
> >
> > ret = drm_plane_helper_check_update(plane, crtc, fb,
> > src, dest, clip,
> > - DRM_PLANE_HELPER_NO_SCALING,
> > - DRM_PLANE_HELPER_NO_SCALING,
> > + min_scale,
> > + max_scale,
> > can_position, true,
> > &state->visible);
> > if (ret)
> > @@ -12874,6 +12996,13 @@ intel_check_primary_plane(struct drm_plane
> *plane,
> > intel_crtc->atomic.update_wm = true;
> > }
> >
> > + if (INTEL_INFO(dev)->gen >= 9) {
> > + ret = skl_update_scaler_users(intel_crtc, crtc_state,
> > + to_intel_plane(plane), state, 0);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > return 0;
> > }
> >
> > @@ -13053,6 +13182,9 @@ static struct drm_plane
> > *intel_primary_plane_create(struct drm_device *dev,
> >
> > primary->can_scale = false;
> > primary->max_downscale = 1;
> > + if (INTEL_INFO(dev)->gen >= 9) {
> > + primary->can_scale = true;
> > + }
> > state->scaler_id = -1;
> > primary->pipe = pipe;
> > primary->plane = pipe;
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h
> > b/drivers/gpu/drm/i915/intel_drv.h
> > index 275a4ef..c9bc975 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -288,11 +288,11 @@ struct intel_initial_plane_config { #define
> > SKL_MIN_SRC_W 8 #define SKL_MAX_SRC_W 4096 #define SKL_MIN_SRC_H
> 8
> > -#define SKL_MAX_SRC_H 2304
> > +#define SKL_MAX_SRC_H 4096
> > #define SKL_MIN_DST_W 8
> > #define SKL_MAX_DST_W 4096
> > #define SKL_MIN_DST_H 8
> > -#define SKL_MAX_DST_H 2304
> > +#define SKL_MAX_DST_H 4096
> >
> > struct intel_scaler {
> > int id;
> > @@ -1131,9 +1131,13 @@ void skl_detach_scalers(struct intel_crtc
> > *intel_crtc); int skl_update_scaler_users(struct intel_crtc *intel_crtc,
> > struct intel_crtc_state *crtc_state, struct intel_plane *intel_plane,
> > struct intel_plane_state *plane_state, int force_detach);
> > +int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state
> > +*crtc_state);
> >
> > unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
> > struct drm_i915_gem_object *obj);
> > +u32 skl_plane_ctl_format(uint32_t pixel_format);
> > +u32 skl_plane_ctl_tiling(uint64_t fb_modifier);
> > +u32 skl_plane_ctl_rotation(unsigned int rotation);
> >
> > /* intel_dp.c */
> > void intel_dp_init(struct drm_device *dev, int output_reg, enum port
> > port); diff --git a/drivers/gpu/drm/i915/intel_sprite.c
> > b/drivers/gpu/drm/i915/intel_sprite.c
> > index 0cb3767..c8e7377 100644
> > --- a/drivers/gpu/drm/i915/intel_sprite.c
> > +++ b/drivers/gpu/drm/i915/intel_sprite.c
> > @@ -1150,6 +1150,16 @@ int intel_sprite_set_colorkey(struct drm_device
> *dev, void *data,
> > }
> >
> > intel_plane = to_intel_plane(plane);
> > +
> > + if (INTEL_INFO(dev)->gen >= 9) {
> > + /* plane scaling and colorkey are mutually exclusive */
> > + if (to_intel_plane_state(plane->state)->scaler_id >= 0) {
> > + DRM_ERROR("colorkey not allowed with scaler\n");
> > + ret = -EINVAL;
> > + goto out_unlock;
> > + }
> > + }
> > +
> > intel_plane->ckey = *set;
> >
> > /*
> > --
> > 1.7.9.5
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Jani Nikula, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list