[Intel-gfx] [PATCH 3/3] drm/i915: eDP Panel Power sequencing add PPS reg set

[Jani Nikula]

On Thu, 30 Apr 2015, Vandana Kannan <vandana.kannan at intel.com> wrote:
> Second set of PPS registers have been defined but will be used when VBT
> provides a selection between the 2 sets of registers.
>
> Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
> Signed-off-by: A.Sunil Kamath <sunil.kamath at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 580f5cb..199a1747 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6345,6 +6345,12 @@ enum skl_disp_power_wells {
>  #define  PANEL_POWER_CYCLE_DELAY_MASK	(0x1f)
>  #define  PANEL_POWER_CYCLE_DELAY_SHIFT	0
>  
> +/* BXT PPS changes - 2nd set of PPS registers */
> +#define BXT_PP_STATUS2		0xc7300
> +#define BXT_PP_CONTROL2 	0xc7304
> +#define BXT_PP_ON_DELAYS2	0xc7308
> +#define BXT_PP_OFF_DELAYS2	0xc730c
> +
>  #define PCH_DP_B		0xe4100
>  #define PCH_DPB_AUX_CH_CTL	0xe4110
>  #define PCH_DPB_AUX_CH_DATA1	0xe4114

How about doing this patch first, with something like:

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 435c372d001e..a3af3526cb4f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6343,6 +6343,17 @@ enum skl_disp_power_wells {
 #define  PANEL_POWER_CYCLE_DELAY_MASK	(0x1f)
 #define  PANEL_POWER_CYCLE_DELAY_SHIFT	0
 
+/* BXT PPS changes - 2nd set of PPS registers */
+#define _BXT_PP_STATUS2		0xc7300
+#define _BXT_PP_CONTROL2 	0xc7304
+#define _BXT_PP_ON_DELAYS2	0xc7308
+#define _BXT_PP_OFF_DELAYS2	0xc730c
+
+#define BXT_PP_STATUS(n)	((!n) ? PCH_PP_STATUS : _BXT_PP_STATUS2)
+#define BXT_PP_CONTROL(n)	((!n) ? PCH_PP_CONTROL : _BXT_PP_CONTROL2)
+#define BXT_PP_ON_DELAYS(n)	((!n) ? PCH_PP_ON_DELAYS : _BXT_PP_ON_DELAYS2)
+#define BXT_PP_OFF_DELAYS(n)	((!n) ? PCH_PP_OFF_DELAYS : _BXT_PP_OFF_DELAYS2)
+
 #define PCH_DP_B		0xe4100
 #define PCH_DPB_AUX_CH_CTL	0xe4110
 #define PCH_DPB_AUX_CH_DATA1	0xe4114

And you could use BXT_PP_* from the start. I believe this will add
clarity to the usage and pinpoint where you'll need to touch the code to
enable the 2nd power sequencer.


BR,
Jani.


> -- 
> 2.0.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Technology Center