[Intel-gfx] [SKL-DMC-BUGFIX 2/5] drm/i915/skl: Making DC6 entry is the last call in suspend flow.
Daniel Vetter
daniel at ffwll.ch
Thu Aug 6 08:38:29 PDT 2015
On Thu, Aug 06, 2015 at 08:08:58PM +0530, Animesh Manna wrote:
>
>
> On 8/6/2015 6:48 PM, Daniel Vetter wrote:
> >On Thu, Aug 06, 2015 at 02:47:22PM +0530, Animesh Manna wrote:
> >>
> >>On 8/5/2015 2:35 PM, Daniel Vetter wrote:
> >>>On Mon, Aug 03, 2015 at 09:55:33PM +0530, Animesh Manna wrote:
> >>>>Mmio register access after dc6/dc5 entry is not allowed when
> >>>>DC6 power states are enabled according to bspec (bspec-id 0527),
> >>>>so enabling dc6 as the last call in suspend flow.
> >>>>
> >>>>v1: Initial version.
> >>>>
> >>>>v2: commit message updated based on comment from Vathsala.
> >>>>
> >>>>Cc: Daniel Vetter <daniel.vetter at intel.com>
> >>>>Cc: Damien Lespiau <damien.lespiau at intel.com>
> >>>>Cc: Imre Deak <imre.deak at intel.com>
> >>>>Cc: Sunil Kamath <sunil.kamath at intel.com>
> >>>>Signed-off-by: Animesh Manna <animesh.manna at intel.com>
> >>>>Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju at intel.com>
> >>>>Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj at intel.com>
> >>>>---
> >>>> drivers/gpu/drm/i915/i915_drv.c | 12 ++++++------
> >>>> drivers/gpu/drm/i915/intel_drv.h | 2 ++
> >>>> drivers/gpu/drm/i915/intel_runtime_pm.c | 33 ++++++++-------------------------
> >>>> 3 files changed, 16 insertions(+), 31 deletions(-)
> >>>>
> >>>>diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> >>>>index 0d6775a..e1d0102 100644
> >>>>--- a/drivers/gpu/drm/i915/i915_drv.c
> >>>>+++ b/drivers/gpu/drm/i915/i915_drv.c
> >>>>@@ -1017,14 +1017,11 @@ static int skl_suspend_complete(struct drm_i915_private *dev_priv)
> >>>> {
> >>>> /* Enabling DC6 is not a hard requirement to enter runtime D3 */
> >>>>- /*
> >>>>- * This is to ensure that CSR isn't identified as loaded before
> >>>>- * CSR-loading program is called during runtime-resume.
> >>>>- */
> >>>>- intel_csr_load_status_set(dev_priv, FW_UNINITIALIZED);
> >>>Seems like an unrelated hunk. Separate patch (in the dmc loader rework
> >>>series) or an explanation why we need this.
> >>In the same skl_suspend_complete() later we are checking if firmware is loaded,
> >>based on that we trigger dc6, so the above hunk has to be removed in this patch.
> >I know that later on we'll replace this with something else, but you can't
> >remove old code before the new code is there. And you can't do changes
> >like this here in unrelated patches.
>
> code snippet added in this patch:
> + if (intel_csr_load_status_get(dev_priv) == FW_LOADED)
> + skl_enable_dc6(dev_priv);
>
> We can add uninitilized call here after this which will be related changes.
> After dmc redesign will remove it completely the function call for csr uninitialization.
Oh right I was getting a bit confused here, that change does make sense.
But the patch should explain better why/how this all gets changed.
Obviously if we keep on setting status to UNITIALIZED then this check here
will always fall over.
Might be good to split up this patch into parts
1. Remove the UNITIALIZED from suspend path since dmc stays around. Also
handle re-loading on hibernate resume correctly.
2. Adjust ordering between dc5 and dc6 for dmc.
I think there's still more parts in this patch, e.g. you also remove the
wait_for ...
> >>On the other hand firmware team confirmed that one time firmware loading
> >>during driver loading is sufficient, no need to load firmware in
> >>csr-address-space every suspend (dc6 entry) - resume (dc6 exit) flow, dmc will
> >>take care of it which eliminate any chance of regression.
> >And what about hibernate?
>
> Yes, during hibernate I assumed os will restore the ram content from disk.
> But specially for csr program we need to load it again. Thanks for the pointer.
Hibernate is really tricky, so please try to test that fully. The big risk
is resume:
- first we load a normal kernel, including i915 and everything
- then that first kernel loads the hibernate image
- then all hw gets shut down like with a normal suspend call
- then we resume everything again
Given all this we might need to check the hw state itself whether dmc is
loaded already and only load it if that's the case. Otherwise bad stuff
might happen.
-Daniel
>
>
> -Animesh
>
> >-Daniel
> >>- Animesh
> >>
> >>>>-
> >>>> skl_uninit_cdclk(dev_priv);
> >>>>+ if (intel_csr_load_status_get(dev_priv) == FW_LOADED)
> >>>>+ skl_enable_dc6(dev_priv);
> >>>>+
> >>>> return 0;
> >>>> }
> >>>>@@ -1071,6 +1068,9 @@ static int skl_resume_prepare(struct drm_i915_private *dev_priv)
> >>>> {
> >>>> struct drm_device *dev = dev_priv->dev;
> >>>>+ if (intel_csr_load_status_get(dev_priv) == FW_LOADED)
> >>>>+ skl_disable_dc6(dev_priv);
> >>>>+
> >>>> skl_init_cdclk(dev_priv);
> >>>> intel_csr_load_program(dev);
> >>>>diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> >>>>index 47cef0e..06f346f 100644
> >>>>--- a/drivers/gpu/drm/i915/intel_drv.h
> >>>>+++ b/drivers/gpu/drm/i915/intel_drv.h
> >>>>@@ -1117,6 +1117,8 @@ void bxt_enable_dc9(struct drm_i915_private *dev_priv);
> >>>> void bxt_disable_dc9(struct drm_i915_private *dev_priv);
> >>>> void skl_init_cdclk(struct drm_i915_private *dev_priv);
> >>>> void skl_uninit_cdclk(struct drm_i915_private *dev_priv);
> >>>>+void skl_enable_dc6(struct drm_i915_private *dev_priv);
> >>>>+void skl_disable_dc6(struct drm_i915_private *dev_priv);
> >>>> void intel_dp_get_m_n(struct intel_crtc *crtc,
> >>>> struct intel_crtc_state *pipe_config);
> >>>> void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n);
> >>>>diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> >>>>index 6393b76..c660245 100644
> >>>>--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> >>>>+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> >>>>@@ -532,7 +532,7 @@ static void assert_can_disable_dc6(struct drm_i915_private *dev_priv)
> >>>> "DC6 already programmed to be disabled.\n");
> >>>> }
> >>>>-static void skl_enable_dc6(struct drm_i915_private *dev_priv)
> >>>>+void skl_enable_dc6(struct drm_i915_private *dev_priv)
> >>>> {
> >>>> uint32_t val;
> >>>>@@ -549,7 +549,7 @@ static void skl_enable_dc6(struct drm_i915_private *dev_priv)
> >>>> POSTING_READ(DC_STATE_EN);
> >>>> }
> >>>>-static void skl_disable_dc6(struct drm_i915_private *dev_priv)
> >>>>+void skl_disable_dc6(struct drm_i915_private *dev_priv)
> >>>> {
> >>>> uint32_t val;
> >>>Everything above seems to roughly be matching your patch description, but
> >>>not perfectly: You talk about suspend flow but also touch resume flow.
> >>>
> >>>But the hunks below are completely unexplained magic afaict. Either this
> >>>needs a separate patch or it needs seriously more explanation of what's
> >>>going on.
> >>>
> >>>>@@ -610,10 +610,10 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> >>>> !I915_READ(HSW_PWR_WELL_BIOS),
> >>>> "Invalid for power well status to be enabled, unless done by the BIOS, \
> >>>> when request is to disable!\n");
> >>>>- if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
> >>>>- power_well->data == SKL_DISP_PW_2) {
> >>>>+ if (power_well->data == SKL_DISP_PW_2) {
> >>>>+ if (GEN9_ENABLE_DC5(dev))
> >>>>+ gen9_disable_dc5(dev_priv);
> >>>> if (SKL_ENABLE_DC6(dev)) {
> >>>>- skl_disable_dc6(dev_priv);
> >>>> /*
> >>>> * DDI buffer programming unnecessary during driver-load/resume
> >>>> * as it's already done during modeset initialization then.
> >>>>@@ -621,8 +621,6 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> >>>> */
> >>>> if (!dev_priv->power_domains.initializing)
> >>>> intel_prepare_ddi(dev);
> >>>>- } else {
> >>>>- gen9_disable_dc5(dev_priv);
> >>>> }
> >>>> }
> >>>> I915_WRITE(HSW_PWR_WELL_DRIVER, tmp | req_mask);
> >>>>@@ -642,24 +640,9 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
> >>>> POSTING_READ(HSW_PWR_WELL_DRIVER);
> >>>> DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
> >>>>- if ((GEN9_ENABLE_DC5(dev) || SKL_ENABLE_DC6(dev)) &&
> >>>>- power_well->data == SKL_DISP_PW_2) {
> >>>>- enum csr_state state;
> >>>>- /* TODO: wait for a completion event or
> >>>>- * similar here instead of busy
> >>>>- * waiting using wait_for function.
> >>>>- */
> >>>>- wait_for((state = intel_csr_load_status_get(dev_priv)) !=
> >>>>- FW_UNINITIALIZED, 1000);
> >>>>- if (state != FW_LOADED)
> >>>>- DRM_ERROR("CSR firmware not ready (%d)\n",
> >>>>- state);
> >>>>- else
> >>>>- if (SKL_ENABLE_DC6(dev))
> >>>>- skl_enable_dc6(dev_priv);
> >>>>- else
> >>>>- gen9_enable_dc5(dev_priv);
> >>>>- }
> >>>>+ if (GEN9_ENABLE_DC5(dev) &&
> >>>>+ power_well->data == SKL_DISP_PW_2)
> >>>>+ gen9_enable_dc5(dev_priv);
> >>>> }
> >>>> }
> >>>>--
> >>>>2.0.2
> >>>>
> >>>>_______________________________________________
> >>>>Intel-gfx mailing list
> >>>>Intel-gfx at lists.freedesktop.org
> >>>>http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list