[Intel-gfx] [PATCH] drm/i915: Retry port as HDMI if dp_is_edp turns out to be false
Lin, Mengdong
mengdong.lin at intel.com
Sun Aug 9 19:30:22 PDT 2015
> -----Original Message-----
> From: Intel-gfx [mailto:intel-gfx-bounces at lists.freedesktop.org] On Behalf Of
> Lukas Wunner
> Hi,
>
> On Sun, Aug 09, 2015 at 01:12:53PM +0100, Chris Wilson wrote:
> > We follow the VBT as to whether a DDI port is used for eDP and if so,
> > do not attach a HDMI encoder to it. However there are machines for
> > which the VBT eDP flag is a lie (shocking!) and we fail to detect a eDP link.
> > Furthermore, on those machines the HDMI is connected to that DDI port
> > but we ignore it.
> >
> > If we reorder our port initialisation to try the eDP setup first and
> > if that fails we can treat it as a normal DP port along with a HDMI
> > output. To accomplish this, we have to delay registering the DP
> > connector/encoder until after we establish its final type.
Sorry to jump in. Could this help another use case as below ?
We have some Bytrail machine (Bayley Bay), we applied HW rework to disable eDP connectivity to DDI1 and enable DP on DDI 1.
But we found the i915 driver still take this DDI as eDP, not DP. we suspect it's because VBT still takes it as DP and so i915 driver just follows.
If we don't want to revise VBT in BIOS after every rework, is there any other way to let i915 detect this is a DP link?
Thanks
Mengdong
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88331
>
> The existing code seems very carefully crafted, taking into account the
> differences betweem various GPU generations etc, shuffling that around
> might risk breakage. FWIW, I'm wondering if just adding a quirk for this single
> Dell workstation might be justified?
>
> Best regards,
>
> Lukas
>
>
> > Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> > Cc: Jesse Barnes <jbarnes at virtuousgeek.org>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 27 ++++----
> > drivers/gpu/drm/i915/intel_dp.c | 127
> +++++++++++++++++------------------
> > drivers/gpu/drm/i915/intel_drv.h | 6 +-
> > 3 files changed, 79 insertions(+), 81 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index 0bcd1b1aba4f..aab8dfd1f8a5 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -13941,7 +13941,6 @@ static void intel_setup_outputs(struct
> > drm_device *dev) {
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_encoder *encoder;
> > - bool dpd_is_edp = false;
> >
> > intel_lvds_init(dev);
> >
> > @@ -13983,31 +13982,33 @@ static void intel_setup_outputs(struct
> drm_device *dev)
> > intel_ddi_init(dev, PORT_D);
> > } else if (HAS_PCH_SPLIT(dev)) {
> > int found;
> > - dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
> >
> > if (has_edp_a(dev))
> > intel_dp_init(dev, DP_A, PORT_A);
> >
> > + found = 0;
> > + /* PCH SDVOB multiplex with HDMIB */
> > if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
> > - /* PCH SDVOB multiplex with HDMIB */
> > found = intel_sdvo_init(dev, PCH_SDVOB, true);
> > if (!found)
> > intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
> > - if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
> > - intel_dp_init(dev, PCH_DP_B, PORT_B);
> > }
> > + if (!found && I915_READ(PCH_DP_B) & DP_DETECTED)
> > + intel_dp_init(dev, PCH_DP_B, PORT_B);
> >
> > - if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
> > - intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
> > -
> > - if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
> > - intel_hdmi_init(dev, PCH_HDMID, PORT_D);
> > -
> > + found = 0;
> > if (I915_READ(PCH_DP_C) & DP_DETECTED)
> > - intel_dp_init(dev, PCH_DP_C, PORT_C);
> > + found = intel_dp_init(dev, PCH_DP_C, PORT_C);
> > + if (found != DRM_MODE_CONNECTOR_eDP &&
> > + I915_READ(PCH_HDMIC) & SDVO_DETECTED)
> > + intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
> >
> > + found = 0;
> > if (I915_READ(PCH_DP_D) & DP_DETECTED)
> > - intel_dp_init(dev, PCH_DP_D, PORT_D);
> > + found = intel_dp_init(dev, PCH_DP_D, PORT_D);
> > + if (found != DRM_MODE_CONNECTOR_eDP &&
> > + I915_READ(PCH_HDMID) & SDVO_DETECTED)
> > + intel_hdmi_init(dev, PCH_HDMID, PORT_D);
> > } else if (IS_VALLEYVIEW(dev)) {
> > /*
> > * The DP_DETECTED bit is the latched state of the DDC diff --git
> > a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index 1e64a8c1e7cb..8adf500f3989 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -1031,14 +1031,13 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux,
> struct drm_dp_aux_msg *msg)
> > return ret;
> > }
> >
> > -static void
> > +static int
> > intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector
> > *connector) {
> > struct drm_device *dev = intel_dp_to_dev(intel_dp);
> > struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > enum port port = intel_dig_port->port;
> > const char *name = NULL;
> > - int ret;
> >
> > switch (port) {
> > case PORT_A:
> > @@ -1080,20 +1079,7 @@ intel_dp_aux_init(struct intel_dp *intel_dp,
> struct intel_connector *connector)
> > DRM_DEBUG_KMS("registering %s bus for %s\n", name,
> > connector->base.kdev->kobj.name);
> >
> > - ret = drm_dp_aux_register(&intel_dp->aux);
> > - if (ret < 0) {
> > - DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
> > - name, ret);
> > - return;
> > - }
> > -
> > - ret = sysfs_create_link(&connector->base.kdev->kobj,
> > - &intel_dp->aux.ddc.dev.kobj,
> > - intel_dp->aux.ddc.dev.kobj.name);
> > - if (ret < 0) {
> > - DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret);
> > - drm_dp_aux_unregister(&intel_dp->aux);
> > - }
> > + return drm_dp_aux_register(&intel_dp->aux);
> > }
> >
> > static void
> > @@ -5019,6 +5005,10 @@ bool intel_dp_is_edp(struct drm_device *dev,
> enum port port)
> > [PORT_D] = PORT_IDPD,
> > };
> >
> > + /* eDP only on port B and/or C on vlv/chv */
> > + if (IS_VALLEYVIEW(dev_priv) && !(port == PORT_B || port == PORT_C))
> > + return false;
> > +
> > if (port == PORT_A)
> > return true;
> >
> > @@ -5670,9 +5660,6 @@ static bool intel_edp_init_connector(struct
> intel_dp *intel_dp,
> > struct edid *edid;
> > enum pipe pipe = INVALID_PIPE;
> >
> > - if (!is_edp(intel_dp))
> > - return true;
> > -
> > pps_lock(intel_dp);
> > intel_edp_panel_vdd_sanitize(intel_dp);
> > pps_unlock(intel_dp);
> > @@ -5762,7 +5749,7 @@ static bool intel_edp_init_connector(struct
> intel_dp *intel_dp,
> > return true;
> > }
> >
> > -bool
> > +int
> > intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> > struct intel_connector *intel_connector) { @@ -5772,6
> +5759,7 @@
> > intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> > struct drm_device *dev = intel_encoder->base.dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > enum port port = intel_dig_port->port;
> > + int ret;
> > int type;
> >
> > intel_dp->pps_pipe = INVALID_PIPE;
> > @@ -5802,34 +5790,14 @@ intel_dp_init_connector(struct
> intel_digital_port *intel_dig_port,
> > else
> > type = DRM_MODE_CONNECTOR_DisplayPort;
> >
> > - /*
> > - * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
> > - * for DP the encoder type can be set by the caller to
> > - * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
> > - */
> > - if (type == DRM_MODE_CONNECTOR_eDP)
> > - intel_encoder->type = INTEL_OUTPUT_EDP;
> > -
> > - /* eDP only on port B and/or C on vlv/chv */
> > - if (WARN_ON(IS_VALLEYVIEW(dev) && is_edp(intel_dp) &&
> > - port != PORT_B && port != PORT_C))
> > - return false;
> > -
> > DRM_DEBUG_KMS("Adding %s connector on port %c\n",
> > type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP",
> > port_name(port));
> >
> > - drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
> > - drm_connector_helper_add(connector,
> &intel_dp_connector_helper_funcs);
> > -
> > connector->interlace_allowed = true;
> > connector->doublescan_allowed = 0;
> >
> > - INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
> > - edp_panel_vdd_work);
> > -
> > - intel_connector_attach_encoder(intel_connector, intel_encoder);
> > - drm_connector_register(connector);
> > + INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
> edp_panel_vdd_work);
> >
> > if (HAS_DDI(dev))
> > intel_connector->get_hw_state =
> intel_ddi_connector_get_hw_state;
> > @@ -5855,7 +5823,7 @@ intel_dp_init_connector(struct intel_digital_port
> *intel_dig_port,
> > BUG();
> > }
> >
> > - if (is_edp(intel_dp)) {
> > + if (type == DRM_MODE_CONNECTOR_eDP) {
> > pps_lock(intel_dp);
> > intel_dp_init_panel_power_timestamps(intel_dp);
> > if (IS_VALLEYVIEW(dev))
> > @@ -5865,7 +5833,49 @@ intel_dp_init_connector(struct
> intel_digital_port *intel_dig_port,
> > pps_unlock(intel_dp);
> > }
> >
> > - intel_dp_aux_init(intel_dp, intel_connector);
> > + ret = intel_dp_aux_init(intel_dp, intel_connector);
> > + if (ret < 0) {
> > + DRM_ERROR("registering DP-AUX channel for %s failed (%d)\n",
> > + intel_dp->aux.name, ret);
> > + return 0;
> > + }
> > +
> > + if (type == DRM_MODE_CONNECTOR_eDP &&
> > + !intel_edp_init_connector(intel_dp, intel_connector)) {
> > + drm_dp_aux_unregister(&intel_dp->aux);
> > + cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
> > + /*
> > + * vdd might still be enabled do to the delayed vdd off.
> > + * Make sure vdd is actually turned off here.
> > + */
> > + pps_lock(intel_dp);
> > + edp_panel_vdd_off_sync(intel_dp);
> > + pps_unlock(intel_dp);
> > +
> > + /* Downgrade to a normal DP link */
> > + type = DRM_MODE_CONNECTOR_DisplayPort;
> > + }
> > +
> > + /*
> > + * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
> > + * for DP the encoder type can be set by the caller to
> > + * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
> > + */
> > + if (type == DRM_MODE_CONNECTOR_eDP)
> > + intel_encoder->type = INTEL_OUTPUT_EDP;
> > +
> > + drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
> > + drm_connector_helper_add(connector,
> > +&intel_dp_connector_helper_funcs);
> > +
> > + intel_connector_attach_encoder(intel_connector, intel_encoder);
> > + drm_connector_register(connector);
> > +
> > + ret = sysfs_create_link(&connector->kdev->kobj,
> > + &intel_dp->aux.ddc.dev.kobj,
> > + intel_dp->aux.ddc.dev.kobj.name);
> > + if (ret < 0)
> > + DRM_ERROR("sysfs_create_link() for %s failed (%d)\n",
> > + intel_dp->aux.name, ret);
> >
> > /* init MST on ports that can support it */
> > if (HAS_DP_MST(dev) &&
> > @@ -5873,23 +5883,6 @@ intel_dp_init_connector(struct
> intel_digital_port *intel_dig_port,
> > intel_dp_mst_encoder_init(intel_dig_port,
> > intel_connector->base.base.id);
> >
> > - if (!intel_edp_init_connector(intel_dp, intel_connector)) {
> > - drm_dp_aux_unregister(&intel_dp->aux);
> > - if (is_edp(intel_dp)) {
> > - cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
> > - /*
> > - * vdd might still be enabled do to the delayed vdd off.
> > - * Make sure vdd is actually turned off here.
> > - */
> > - pps_lock(intel_dp);
> > - edp_panel_vdd_off_sync(intel_dp);
> > - pps_unlock(intel_dp);
> > - }
> > - drm_connector_unregister(connector);
> > - drm_connector_cleanup(connector);
> > - return false;
> > - }
> > -
> > intel_dp_add_properties(intel_dp, connector);
> >
> > /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
> > @@ -5903,10 +5896,10 @@ intel_dp_init_connector(struct
> > intel_digital_port *intel_dig_port,
> >
> > i915_debugfs_connector_add(connector);
> >
> > - return true;
> > + return type;
> > }
> >
> > -void
> > +int
> > intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
> > {
> > struct drm_i915_private *dev_priv = dev->dev_private; @@ -5914,15
> > +5907,16 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum
> port port)
> > struct intel_encoder *intel_encoder;
> > struct drm_encoder *encoder;
> > struct intel_connector *intel_connector;
> > + int ret;
> >
> > intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL);
> > if (!intel_dig_port)
> > - return;
> > + return 0;
> >
> > intel_connector = intel_connector_alloc();
> > if (!intel_connector) {
> > kfree(intel_dig_port);
> > - return;
> > + return 0;
> > }
> >
> > intel_encoder = &intel_dig_port->base; @@ -5970,11 +5964,14 @@
> > intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
> > intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
> > dev_priv->hotplug.irq_port[port] = intel_dig_port;
> >
> > - if (!intel_dp_init_connector(intel_dig_port, intel_connector)) {
> > + ret = intel_dp_init_connector(intel_dig_port, intel_connector);
> > + if (ret == 0) {
> > drm_encoder_cleanup(encoder);
> > kfree(intel_dig_port);
> > kfree(intel_connector);
> > }
> > +
> > + return ret;
> > }
> >
> > void intel_dp_mst_suspend(struct drm_device *dev) diff --git
> > a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 18fe6d8b7d93..ade1ce853583 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1179,9 +1179,9 @@ void intel_csr_ucode_fini(struct drm_device
> > *dev); void assert_csr_loaded(struct drm_i915_private *dev_priv);
> >
> > /* intel_dp.c */
> > -void intel_dp_init(struct drm_device *dev, int output_reg, enum port
> > port); -bool intel_dp_init_connector(struct intel_digital_port
> *intel_dig_port,
> > - struct intel_connector *intel_connector);
> > +int intel_dp_init(struct drm_device *dev, int output_reg, enum port
> > +port); int intel_dp_init_connector(struct intel_digital_port
> *intel_dig_port,
> > + struct intel_connector *intel_connector);
> > void intel_dp_start_link_train(struct intel_dp *intel_dp); void
> > intel_dp_complete_link_train(struct intel_dp *intel_dp); void
> > intel_dp_stop_link_train(struct intel_dp *intel_dp);
> > --
> > 2.5.0
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list