[Intel-gfx] [PATCH v3 2/4] drm/i915: implement sync_audio_rate callback
Yang, Libin
libin.yang at intel.com
Mon Aug 17 07:40:55 PDT 2015
Hi Jani
> -----Original Message-----
> From: Jani Nikula [mailto:jani.nikula at linux.intel.com]
> Sent: Monday, August 17, 2015 8:21 PM
> To: Yang, Libin; alsa-devel at alsa-project.org; tiwai at suse.de; intel-
> gfx at lists.freedesktop.org; daniel.vetter at ffwll.ch
> Cc: Yang, Libin
> Subject: Re: [PATCH v3 2/4] drm/i915: implement sync_audio_rate
> callback
>
> On Mon, 17 Aug 2015, libin.yang at intel.com wrote:
> > From: Libin Yang <libin.yang at intel.com>
> >
> > HDMI audio may not work at some frequencies
> > with the HW provided N/CTS.
> >
> > This patch sets the proper N value for the
> > given audio sample rate at the impacted frequencies.
> > At other frequencies, it will use the N/CTS value
> > which HW provides.
> >
> > Signed-off-by: Libin Yang <libin.yang at intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_audio.c | 117
> +++++++++++++++++++++++++++++++++++++
> > 1 file changed, 117 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_audio.c
> b/drivers/gpu/drm/i915/intel_audio.c
> > index dc32cf4..27add6a 100644
> > --- a/drivers/gpu/drm/i915/intel_audio.c
> > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > @@ -68,6 +68,31 @@ static const struct {
> > { 148500, AUD_CONFIG_PIXEL_CLOCK_HDMI_148500 },
> > };
> >
> > +/* HDMI N/CTS table */
> > +#define TMDS_297M 297000
> > +#define TMDS_296M DIV_ROUND_UP(297000 * 1000, 1001)
> > +static const struct {
> > + int sample_rate;
> > + int clock;
> > + int n;
> > + int cts;
> > +} aud_ncts[] = {
> > + { 44100, TMDS_296M, 4459, 234375 },
> > + { 44100, TMDS_297M, 4704, 247500 },
> > + { 48000, TMDS_296M, 5824, 281250 },
> > + { 48000, TMDS_297M, 5120, 247500 },
> > + { 32000, TMDS_296M, 5824, 421875 },
> > + { 32000, TMDS_297M, 3072, 222750 },
> > + { 88200, TMDS_296M, 8918, 234375 },
> > + { 88200, TMDS_297M, 9408, 247500 },
> > + { 96000, TMDS_296M, 11648, 281250 },
> > + { 96000, TMDS_297M, 10240, 247500 },
> > + { 176400, TMDS_296M, 17836, 234375 },
> > + { 176400, TMDS_297M, 18816, 247500 },
> > + { 44100, TMDS_296M, 23296, 281250 },
> > + { 44100, TMDS_297M, 20480, 247500 },
> > +};
> > +
> > /* get AUD_CONFIG_PIXEL_CLOCK_HDMI_* value for mode */
> > static u32 audio_config_hdmi_pixel_clock(struct drm_display_mode
> *mode)
> > {
> > @@ -90,6 +115,31 @@ static u32
> audio_config_hdmi_pixel_clock(struct drm_display_mode *mode)
> > return hdmi_audio_clock[i].config;
> > }
> >
> > +static int audio_config_get_n(struct drm_display_mode *mode, int
> rate)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {
> > + if ((rate == aud_ncts[i].sample_rate) &&
> > + (mode->clock == aud_ncts[i].clock)) {
> > + return aud_ncts[i].n;
> > + }
> > + }
> > + return 0;
> > +}
> > +
> > +/* check whether N/CTS/M need be set manually */
> > +static bool audio_rate_need_prog(struct intel_crtc *crtc,
> > + struct drm_display_mode
> *mode)
> > +{
> > + if (((mode->clock == TMDS_297M) ||
> > + (mode->clock == TMDS_296M)) &&
> > + intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
> > + return true;
> > + else
> > + return false;
> > +}
> > +
> > static bool intel_eld_uptodate(struct drm_connector *connector,
> > int reg_eldv, uint32_t bits_eldv,
> > int reg_elda, uint32_t bits_elda,
> > @@ -514,12 +564,79 @@ static int
> i915_audio_component_get_cdclk_freq(struct device *dev)
> > return ret;
> > }
> >
> > +static int i915_audio_component_sync_audio_rate(struct device
> *dev,
> > + int port, int rate)
> > +{
> > + struct drm_i915_private *dev_priv = dev_to_i915(dev);
> > + struct drm_device *drm_dev = dev_priv->dev;
> > + struct intel_encoder *intel_encoder;
> > + struct intel_digital_port *intel_dig_port;
> > + struct intel_crtc *crtc;
> > + struct drm_display_mode *mode;
> > + enum pipe pipe = -1;
> > + u32 tmp;
> > + int n_low, n_up, n;
> > +
> > + /* 1. get the pipe */
> > + for_each_intel_encoder(drm_dev, intel_encoder) {
> > + intel_dig_port = enc_to_dig_port(&intel_encoder-
> >base);
>
> Mmmh, not all encoders are digital ports. enc_to_dig_port does a
> container_of, so you can't just check for NULL either. IOW, you need
> to
> check the encoder->type (and you only care about HDMI here).
Do you mean it should be:
if (!crtc || !intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
regards,
Libin
>
> > + if (port == intel_dig_port->port) {
> > + crtc = to_intel_crtc(intel_encoder->base.crtc);
> > + if (!crtc) {
> > + DRM_DEBUG_KMS("%s: crtc is
> NULL\n", __func__);
> > + continue;
> > + }
> > + pipe = crtc->pipe;
> > + break;
> > + }
> > + }
> > +
> > + if (pipe == INVALID_PIPE) {
> > + DRM_DEBUG_KMS("no pipe for the port %c\n",
> port_name(port));
> > + return -ENODEV;
> > + }
> > + DRM_DEBUG_KMS("pipe %c connects port %c\n",
> > + pipe_name(pipe), port_name(port));
> > + mode = &crtc->config->base.adjusted_mode;
> > +
> > + /* 2. check whether to set the N/CTS/M manually or not */
> > + if (!audio_rate_need_prog(crtc, mode)) {
> > + tmp = I915_READ(HSW_AUD_CFG(pipe));
> > + tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
> > + I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> > + return 0;
> > + }
> > +
> > + n = audio_config_get_n(mode, rate);
> > + if (n == 0) {
> > + DRM_DEBUG_KMS("Using automatic mode for N value
> on port %c\n",
> > + port_name(port));
> > + tmp = I915_READ(HSW_AUD_CFG(pipe));
> > + tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
> > + I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> > + return 0;
> > + }
> > + n_low = n & 0xfff;
> > + n_up = (n >> 12) & 0xff;
> > +
> > + /* 4. set the N/CTS/M */
> > + tmp = I915_READ(HSW_AUD_CFG(pipe));
> > + tmp &= ~(AUD_CONFIG_UPPER_N_MASK |
> AUD_CONFIG_LOWER_N_MASK);
> > + tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) |
> > + (n_low << AUD_CONFIG_LOWER_N_SHIFT) |
> > + AUD_CONFIG_N_PROG_ENABLE);
> > + I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> > +
> > + return 0;
> > +}
> > +
> > static const struct i915_audio_component_ops
> i915_audio_component_ops = {
> > .owner = THIS_MODULE,
> > .get_power = i915_audio_component_get_power,
> > .put_power = i915_audio_component_put_power,
> > .codec_wake_override =
> i915_audio_component_codec_wake_override,
> > .get_cdclk_freq = i915_audio_component_get_cdclk_freq,
> > + .sync_audio_rate = i915_audio_component_sync_audio_rate,
> > };
> >
> > static int i915_audio_component_bind(struct device *i915_dev,
> > --
> > 1.9.1
> >
>
> --
> Jani Nikula, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list