[Intel-gfx] [PATCH v5 3/4] drm/i915: DSI pixel clock check

[Ville Syrjälä]

On Tue, Aug 18, 2015 at 02:37:01PM +0300, Mika Kahola wrote:
> It is possible the we request to have a mode that has
> higher pixel clock than our HW can support. This patch
> checks if requested pixel clock is lower than the one
> supported by the HW. The requested mode is discarded
> if we cannot support the requested pixel clock.
> 
> This patch applies to DSI.
> 
> V2:
> - removed computation for max pixel clock
> 
> V3:
> - cleanup by removing unnecessary lines
> 
> V4:
> - max_pixclk variable renamed as max_dotclk
> - moved dot clock checking inside 'if (fixed_mode)'
> 
> V5:
> - dot clock checked against fixed_mode clock
> 
> Signed-off-by: Mika Kahola <mika.kahola at intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

> ---
>  drivers/gpu/drm/i915/intel_dsi.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
> index 4a601cf..781c267 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -654,6 +654,7 @@ intel_dsi_mode_valid(struct drm_connector *connector,
>  {
>  	struct intel_connector *intel_connector = to_intel_connector(connector);
>  	struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> +	int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
>  
>  	DRM_DEBUG_KMS("\n");
>  
> @@ -667,6 +668,8 @@ intel_dsi_mode_valid(struct drm_connector *connector,
>  			return MODE_PANEL;
>  		if (mode->vdisplay > fixed_mode->vdisplay)
>  			return MODE_PANEL;
> +		if (fixed_mode->clock > max_dotclk)
> +			return MODE_CLOCK_HIGH;
>  	}
>  
>  	return MODE_OK;
> -- 
> 1.9.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC