[Intel-gfx] [PATCH v5 2/4] drm/i915: implement sync_audio_rate callback

Wed Aug 26 05:27:16 PDT 2015

On Tue, Aug 25, 2015 at 01:48:13AM +0000, Yang, Libin wrote:
> 
> > -----Original Message-----
> > From: Ville Syrjälä [mailto:ville.syrjala at linux.intel.com]
> > Sent: Tuesday, August 25, 2015 12:27 AM
> > To: Yang, Libin
> > Cc: alsa-devel at alsa-project.org; tiwai at suse.de; intel-
> > gfx at lists.freedesktop.org; daniel.vetter at ffwll.ch;
> > jani.nikula at linux.intel.com
> > Subject: Re: [Intel-gfx] [PATCH v5 2/4] drm/i915: implement
> > sync_audio_rate callback
> > 
> > On Mon, Aug 24, 2015 at 03:35:33PM +0000, Yang, Libin wrote:
> > > > -----Original Message-----
> > > > From: Ville Syrjälä [mailto:ville.syrjala at linux.intel.com]
> > > > Sent: Monday, August 24, 2015 8:53 PM
> > > > To: Yang, Libin
> > > > Cc: alsa-devel at alsa-project.org; tiwai at suse.de; intel-
> > > > gfx at lists.freedesktop.org; daniel.vetter at ffwll.ch;
> > > > jani.nikula at linux.intel.com
> > > > Subject: Re: [Intel-gfx] [PATCH v5 2/4] drm/i915: implement
> > > > sync_audio_rate callback
> > > >
> > > > On Mon, Aug 24, 2015 at 02:38:14AM +0000, Yang, Libin wrote:
> > > > > > -----Original Message-----
> > > > > > From: Ville Syrjälä [mailto:ville.syrjala at linux.intel.com]
> > > > > > Sent: Friday, August 21, 2015 11:14 PM
> > > > > > To: Yang, Libin
> > > > > > Cc: alsa-devel at alsa-project.org; tiwai at suse.de; intel-
> > > > > > gfx at lists.freedesktop.org; daniel.vetter at ffwll.ch;
> > > > > > jani.nikula at linux.intel.com
> > > > > > Subject: Re: [Intel-gfx] [PATCH v5 2/4] drm/i915: implement
> > > > > > sync_audio_rate callback
> > > > > >
> > > > > > On Tue, Aug 18, 2015 at 02:51:52PM +0800,
> > libin.yang at intel.com
> > > > > > wrote:
> > > > > > > +static int i915_audio_component_sync_audio_rate(struct
> > device
> > > > > > *dev,
> > > > > > > +						int port, int
> > rate)
> > > > > > > +{
> > > > > > > +	struct drm_i915_private *dev_priv = dev_to_i915(dev);
> > > > > > > +	struct drm_device *drm_dev = dev_priv->dev;
> > > > > > > +	struct intel_encoder *intel_encoder;
> > > > > > > +	struct intel_digital_port *intel_dig_port;
> > > > > > > +	struct intel_crtc *crtc;
> > > > > > > +	struct drm_display_mode *mode;
> > > > > > > +	enum pipe pipe = -1;
> > > > > > > +	u32 tmp;
> > > > > > > +	int n_low, n_up, n;
> > > > > > > +
> > > > > > > +	/* 1. get the pipe */
> > > > > > > +	for_each_intel_encoder(drm_dev, intel_encoder) {
> > > > > > > +		if (intel_encoder->type !=
> > INTEL_OUTPUT_HDMI)
> > > > > > > +			continue;
> > > > > > > +		intel_dig_port =
> > enc_to_dig_port(&intel_encoder-
> > > > > > >base);
> > > > > > > +		if (port == intel_dig_port->port) {
> > > > > > > +			crtc = to_intel_crtc(intel_encoder-
> > >base.crtc);
> > > > > >
> > > > > > This sort of thing would need some locking to safely start
> > digging
> > > > at
> > > > > > the modeset state.
> > > > > >
> > > > > > I would probably not do that, and instead add some new lock(s)
> > for
> > > > this.
> > > > > > The modeset code would then fill out some relevant
> > information
> > > > > > protected
> > > > > > by that same lock, and this function could then go look at it
> > > > without
> > > > > > having to worry about the rest of modeset locking/state.
> > > > >
> > > > > >From audio side, there is no competition when calling the
> > function,
> > > > > I think.
> > > > > For protecting the competition between audio and gfx driver,
> > > > > it seems we need use the lock from gfx side. Do you have
> > suggested
> > > > >  lock I can use?
> > > >
> > > > To do it like this we'd need pretty much all the modeset locks,
> > which
> > > > to me feels a bit troublesome if the audio driver can call this at
> > > > any point. So I suggested that we may want to add some kind of
> > new
> > > > audio lock to i915.
> > >
> > > If we are using a new audio lock, I believe we still need use the
> > > lock when gfx is doing the modeset. Only adding the new lock
> > > in the function i915_audio_component_sync_audio_rate()
> > > is not enough because gfx driver will still modify it without
> > > locking.
> > >
> > > I'm not sure where to add the lock in the gfx driver.
> > 
> > The audio enable/disable during modeset would also grab the lock,
> > and
> > consult whatever information the audio driver provided. I would also
> > suggest renaming the .sync_audio_rate() to something more clear like
> > .set_sample_rate()
> 
> The sample rate in audio means the how often the audio data
> is sampled. Actually this function is none of setting sample rate.

Well it's more of sample_rate_change_notify() or something like that.
But I don't mind too much what it's called. We can go with your original
name if you feel it's more clear.

> The sample rate setting is done in audio driver. What the function
> does is only setting the n/cts based on the audio sample rate.
> 
> > 
> > Anyway, I was thinking of something like this:
> > 
> > intel_audio_codec_enable()
> > {
> > 	lock();
> > 	.. configure n/cts
> > 	encoder->audio.enabled = true;
> > 	unlock();
> > }
> > 
> > intel_audio_codec_disable()
> > {
> > 	lock();
> > 	encoder->audio.enabled = false;
> > 	unlock();
> > }
> > 
> > set_sample_rate()
> > {
> > 	lock();
> > 	encoder->audio.sample_rate = rate;
> > 	if (encoder->audio.enabled) {
> > 		... reconfigure n/cts
> > 	}
> > 	unlock();
> > }
> 
> I'm still not sure whether it is safe when gfx driver is doing the modeset.
> Suppose gfx driver will handle the protection, right?

intel_audio_codec_enable/disable are called during the modeset. With my
idea as long as you're holding the lock and audio.enabled==true you
could be sure there's nothing bad happening at the same time in i915.

> 
> If so, I will add spin_lock_irqsave as you suggested. 

Could be a mutex I think.

> 
> > 
> > Something like that should protect sample rate changes from racing
> > with an ongoing modeset.
> 
> Btw, it is not changing the sample rate. Audio sample rate will never
> be changed in these functions.

The audio driver can change the sample rate at any point, at which point
it'll call into i915 to reconfigure n/cts, no? So we just need to make
sure things can't blow up if it does that while there's a modeset
happening at the same time.

> 
> Regards,
> Libin
> > 
> > >
> > > Regards,
> > > Libin
> > > >
> > > > >
> > > > > >
> > > > > > > +			if (!crtc) {
> > > > > > > +				DRM_DEBUG_KMS("%s: crtc is
> > > > > > NULL\n", __func__);
> > > > > > > +				continue;
> > > > > > > +			}
> > > > > > > +			pipe = crtc->pipe;
> > > > > > > +			break;
> > > > > > > +		}
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	if (pipe == INVALID_PIPE) {
> > > > > > > +		DRM_DEBUG_KMS("no pipe for the port %c\n",
> > > > > > port_name(port));
> > > > > > > +		return -ENODEV;
> > > > > > > +	}
> > > > > > > +	DRM_DEBUG_KMS("pipe %c connects port %c\n",
> > > > > > > +				  pipe_name(pipe),
> > port_name(port));
> > > > > > > +	mode = &crtc->config->base.adjusted_mode;
> > > > > > > +
> > > > > > > +	/* 2. check whether to set the N/CTS/M manually or
> > not */
> > > > > > > +	if (!audio_rate_need_prog(crtc, mode)) {
> > > > > > > +		tmp = I915_READ(HSW_AUD_CFG(pipe));
> > > > > > > +		tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
> > > > > > > +		I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> > > > > >
> > > > > > This stuff would need to be abstracted to work on pre-HSW too.
> > > > >
> > > > > Right, I need judge the platform firstly.
> > > > >
> > > > > >
> > > > > > > +		return 0;
> > > > > > > +	}
> > > > > > > +
> > > > > > > +	n = audio_config_get_n(mode, rate);
> > > > > > > +	if (n == 0) {
> > > > > > > +		DRM_DEBUG_KMS("Using automatic mode for
> > N value
> > > > > > on port %c\n",
> > > > > > > +					  port_name(port));
> > > > > > > +		tmp = I915_READ(HSW_AUD_CFG(pipe));
> > > > > > > +		tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
> > > > > > > +		I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> > > > > > > +		return 0;
> > > > > > > +	}
> > > > > > > +	n_low = n & 0xfff;
> > > > > > > +	n_up = (n >> 12) & 0xff;
> > > > > > > +
> > > > > > > +	/* 4. set the N/CTS/M */
> > > > > > > +	tmp = I915_READ(HSW_AUD_CFG(pipe));
> > > > > > > +	tmp &= ~(AUD_CONFIG_UPPER_N_MASK |
> > > > > > AUD_CONFIG_LOWER_N_MASK);
> > > > > > > +	tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) |
> > > > > > > +			(n_low <<
> > AUD_CONFIG_LOWER_N_SHIFT) |
> > > > > > > +			AUD_CONFIG_N_PROG_ENABLE);
> > > > > > > +	I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> > > > > > > +
> > > > > > > +	return 0;
> > > > > > > +}
> > > > > > > +
> > > > > > >  static const struct i915_audio_component_ops
> > > > > > i915_audio_component_ops = {
> > > > > > >  	.owner		= THIS_MODULE,
> > > > > > >  	.get_power	= i915_audio_component_get_power,
> > > > > > >  	.put_power	= i915_audio_component_put_power,
> > > > > > >  	.codec_wake_override =
> > > > > > i915_audio_component_codec_wake_override,
> > > > > > >  	.get_cdclk_freq	=
> > i915_audio_component_get_cdclk_freq,
> > > > > > > +	.sync_audio_rate =
> > i915_audio_component_sync_audio_rate,
> > > > > > >  };
> > > > > > >
> > > > > > >  static int i915_audio_component_bind(struct device
> > *i915_dev,
> > > > > > > --
> > > > > > > 1.9.1
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Intel-gfx mailing list
> > > > > > > Intel-gfx at lists.freedesktop.org
> > > > > > > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > > > > >
> > > > > > --
> > > > > > Ville Syrjälä
> > > > > > Intel OTC
> > > >
> > > > --
> > > > Ville Syrjälä
> > > > Intel OTC
> > 
> > --
> > Ville Syrjälä
> > Intel OTC

-- 
Ville Syrjälä
Intel OTC