[Intel-gfx] [PATCH] drm/i915: fix fdi related fifo underruns on hsw
Mika Kahola
mika.kahola at intel.com
Tue Dec 1 00:15:01 PST 2015
On Sat, 2015-11-28 at 11:05 +0100, Daniel Vetter wrote:
> Similar to
>
> commit 37ca8d4ccd9860df0747aa2ea281a3c9c4bf8826
> Author: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Date: Fri Oct 30 19:20:27 2015 +0200
>
> drm/i915: Enable PCH FIFO underruns later on ILK/SNB/IVB
>
> we can only enable fifo underrun reporting when using the fdi/lpt
> after everything is set up and after a bit of waiting. The waiting
> is required, enabling it right after enabling encoders will first trigger
> an underrun on the pch and then, 1 frame later, an underrun on the
> cpu. Two vblank waits after encoder enabling seems enough to curb it.
>
> And similar to
>
> Author: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Date: Fri Nov 20 22:09:18 2015 +0200
>
> drm/i915: Suppress spurious CPU FIFO underruns on ILK-IVB
>
> we also need to make sure cpu fifo underrun reporting is disabled when
> enabling the fdi rx/tx and pch transcoder&port. But somehow this is
> only needed when enabling, not also when disabling.
>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
Reviewed-by: Mika Kahola <mika.kahola at intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 7754db9fa8a4..62097e94996a 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4979,7 +4979,11 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
>
> intel_crtc->active = true;
>
> - intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
> + if (intel_crtc->config->has_pch_encoder)
> + intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
> + else
> + intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
> +
> for_each_encoder_on_crtc(dev, crtc, encoder) {
> if (encoder->pre_pll_enable)
> encoder->pre_pll_enable(encoder);
> @@ -5025,9 +5029,13 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
> intel_opregion_notify_encoder(encoder, true);
> }
>
> - if (intel_crtc->config->has_pch_encoder)
> + if (intel_crtc->config->has_pch_encoder) {
> + intel_wait_for_vblank(dev, pipe);
> + intel_wait_for_vblank(dev, pipe);
> + intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
> intel_set_pch_fifo_underrun_reporting(dev_priv, TRANSCODER_A,
> true);
> + }
>
> /* If we change the relative order between pipe/planes enabling, we need
> * to change the workaround. */
More information about the Intel-gfx
mailing list