[Intel-gfx] [PATCH i-g-t 3/3] tests/kms_force_connector: Include in BAT set
Thomas Wood
thomas.wood at intel.com
Tue Dec 1 02:33:22 PST 2015
On 1 December 2015 at 10:24, Daniel Vetter <daniel.vetter at ffwll.ch> wrote:
> Forcing connector state is a basic piece of our test infrastructure
> that we use in all the kms_ tests. It allows us to run tests even if
> no outputs are connected.
>
> They're also really fast, so perfect candidates for inclusion into the
> BAT set.
>
> Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
> ---
> tests/.gitignore | 2 +-
> tests/Makefile.sources | 2 +-
> tests/kms_force_connector.c | 189 --------------------------------------
> tests/kms_force_connector_basic.c | 189 ++++++++++++++++++++++++++++++++++++++
Would it be worth renaming the subtests instead, in case there are
future tests that would make sense in kms_force_connector but that
shouldn't be included in the BAT list?
> 4 files changed, 191 insertions(+), 191 deletions(-)
> delete mode 100644 tests/kms_force_connector.c
> create mode 100644 tests/kms_force_connector_basic.c
>
> diff --git a/tests/.gitignore b/tests/.gitignore
> index 43d63d3abac9..900c681caec9 100644
> --- a/tests/.gitignore
> +++ b/tests/.gitignore
> @@ -138,7 +138,7 @@ kms_fence_pin_leak
> kms_flip
> kms_flip_event_leak
> kms_flip_tiling
> -kms_force_connector
> +kms_force_connector_basic
> kms_frontbuffer_tracking
> kms_legacy_colorkey
> kms_mmio_vs_cs_flip
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index b70bca060253..63de439d8717 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -163,7 +163,7 @@ TESTS_progs = \
> gen7_forcewake_mt \
> kms_3d \
> kms_fence_pin_leak \
> - kms_force_connector \
> + kms_force_connector_basic \
> kms_pwrite_crc \
> kms_sink_crc_basic \
> prime_udl \
> diff --git a/tests/kms_force_connector.c b/tests/kms_force_connector.c
> deleted file mode 100644
> index 637f625a852f..000000000000
> --- a/tests/kms_force_connector.c
> +++ /dev/null
> @@ -1,189 +0,0 @@
> -/*
> - * Copyright © 2014 Intel Corporation
> - *
> - * Permission is hereby granted, free of charge, to any person obtaining a
> - * copy of this software and associated documentation files (the "Software"),
> - * to deal in the Software without restriction, including without limitation
> - * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> - * and/or sell copies of the Software, and to permit persons to whom the
> - * Software is furnished to do so, subject to the following conditions:
> - *
> - * The above copyright notice and this permission notice (including the next
> - * paragraph) shall be included in all copies or substantial portions of the
> - * Software.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> - * IN THE SOFTWARE.
> - *
> - */
> -
> -#include "igt.h"
> -
> -IGT_TEST_DESCRIPTION("Check the debugfs force connector/edid features work"
> - " correctly.");
> -
> -#define CHECK_MODE(m, h, w, r) \
> - igt_assert_eq(m.hdisplay, h); igt_assert_eq(m.vdisplay, w); \
> - igt_assert_eq(m.vrefresh, r);
> -
> -static void reset_connectors(void)
> -{
> - int drm_fd = 0;
> - drmModeRes *res;
> - drmModeConnector *connector = NULL;
> -
> - drm_fd = drm_open_driver_master(DRIVER_INTEL);
> - res = drmModeGetResources(drm_fd);
> -
> - for (int i = 0; i < res->count_connectors; i++) {
> -
> - connector = drmModeGetConnectorCurrent(drm_fd,
> - res->connectors[i]);
> -
> - kmstest_force_connector(drm_fd, connector,
> - FORCE_CONNECTOR_UNSPECIFIED);
> -
> - kmstest_force_edid(drm_fd, connector, NULL, 0);
> -
> - drmModeFreeConnector(connector);
> - }
> -}
> -
> -static int opt_handler(int opt, int opt_index, void *data)
> -{
> - switch (opt) {
> - case 'r':
> - reset_connectors();
> - exit(0);
> - break;
> - }
> -
> - return 0;
> -}
> -
> -int main(int argc, char **argv)
> -{
> - /* force the VGA output and test that it worked */
> - int drm_fd = 0;
> - drmModeRes *res;
> - drmModeConnector *vga_connector = NULL, *temp;
> - int start_n_modes, start_connection;
> - struct option long_opts[] = {
> - {"reset", 0, 0, 'r'},
> - {0, 0, 0, 0}
> - };
> - const char *help_str =
> - " --reset\t\tReset all connector force states and edid.\n";
> -
> - igt_subtest_init_parse_opts(&argc, argv, "", long_opts, help_str,
> - opt_handler, NULL);
> -
> - igt_fixture {
> - drm_fd = drm_open_driver_master(DRIVER_INTEL);
> - res = drmModeGetResources(drm_fd);
> -
> - /* find the vga connector */
> - for (int i = 0; i < res->count_connectors; i++) {
> -
> - vga_connector = drmModeGetConnectorCurrent(drm_fd,
> - res->connectors[i]);
> -
> - if (vga_connector->connector_type == DRM_MODE_CONNECTOR_VGA) {
> - start_n_modes = vga_connector->count_modes;
> - start_connection = vga_connector->connection;
> - break;
> - }
> -
> - drmModeFreeConnector(vga_connector);
> -
> - vga_connector = NULL;
> - }
> -
> - igt_require(vga_connector);
> - igt_skip_on(vga_connector->connection == DRM_MODE_CONNECTED);
> - }
> -
> - igt_subtest("force-connector-state") {
> - igt_display_t display;
> -
> - /* force the connector on and check the reported values */
> - kmstest_force_connector(drm_fd, vga_connector, FORCE_CONNECTOR_ON);
> - temp = drmModeGetConnectorCurrent(drm_fd,
> - vga_connector->connector_id);
> - igt_assert_eq(temp->connection, DRM_MODE_CONNECTED);
> - igt_assert_lt(0, temp->count_modes);
> - drmModeFreeConnector(temp);
> -
> - /* attempt to use the display */
> - kmstest_set_vt_graphics_mode();
> - igt_display_init(&display, drm_fd);
> - igt_display_commit(&display);
> - igt_display_fini(&display);
> -
> -
> - /* force the connector off */
> - kmstest_force_connector(drm_fd, vga_connector,
> - FORCE_CONNECTOR_OFF);
> - temp = drmModeGetConnectorCurrent(drm_fd,
> - vga_connector->connector_id);
> - igt_assert_eq(temp->connection, DRM_MODE_DISCONNECTED);
> - igt_assert_eq(0, temp->count_modes);
> - drmModeFreeConnector(temp);
> -
> - /* check that the previous state is restored */
> - kmstest_force_connector(drm_fd, vga_connector,
> - FORCE_CONNECTOR_UNSPECIFIED);
> - temp = drmModeGetConnectorCurrent(drm_fd,
> - vga_connector->connector_id);
> - igt_assert_eq(temp->connection, start_connection);
> - drmModeFreeConnector(temp);
> - }
> -
> - igt_subtest("force-edid") {
> - kmstest_force_connector(drm_fd, vga_connector,
> - FORCE_CONNECTOR_ON);
> - temp = drmModeGetConnectorCurrent(drm_fd,
> - vga_connector->connector_id);
> - drmModeFreeConnector(temp);
> -
> - /* test edid forcing */
> - kmstest_force_edid(drm_fd, vga_connector,
> - igt_kms_get_base_edid(), EDID_LENGTH);
> - temp = drmModeGetConnectorCurrent(drm_fd,
> - vga_connector->connector_id);
> -
> - igt_debug("num_conn %i\n", temp->count_modes);
> -
> - CHECK_MODE(temp->modes[0], 1920, 1080, 60);
> - /* Don't check non-preferred modes to avoid to tight coupling
> - * with the in-kernel EDID parser. */
> -
> - drmModeFreeConnector(temp);
> -
> - /* remove edid */
> - kmstest_force_edid(drm_fd, vga_connector, NULL, 0);
> - kmstest_force_connector(drm_fd, vga_connector,
> - FORCE_CONNECTOR_UNSPECIFIED);
> - temp = drmModeGetConnectorCurrent(drm_fd,
> - vga_connector->connector_id);
> - /* the connector should now have the same number of modes that
> - * it started with */
> - igt_assert_eq(temp->count_modes, start_n_modes);
> - drmModeFreeConnector(temp);
> -
> - }
> -
> - igt_fixture {
> - drmModeFreeConnector(vga_connector);
> - close(drm_fd);
> -
> - reset_connectors();
> - }
> -
> - igt_exit();
> -}
> diff --git a/tests/kms_force_connector_basic.c b/tests/kms_force_connector_basic.c
> new file mode 100644
> index 000000000000..637f625a852f
> --- /dev/null
> +++ b/tests/kms_force_connector_basic.c
> @@ -0,0 +1,189 @@
> +/*
> + * Copyright © 2014 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +
> +#include "igt.h"
> +
> +IGT_TEST_DESCRIPTION("Check the debugfs force connector/edid features work"
> + " correctly.");
> +
> +#define CHECK_MODE(m, h, w, r) \
> + igt_assert_eq(m.hdisplay, h); igt_assert_eq(m.vdisplay, w); \
> + igt_assert_eq(m.vrefresh, r);
> +
> +static void reset_connectors(void)
> +{
> + int drm_fd = 0;
> + drmModeRes *res;
> + drmModeConnector *connector = NULL;
> +
> + drm_fd = drm_open_driver_master(DRIVER_INTEL);
> + res = drmModeGetResources(drm_fd);
> +
> + for (int i = 0; i < res->count_connectors; i++) {
> +
> + connector = drmModeGetConnectorCurrent(drm_fd,
> + res->connectors[i]);
> +
> + kmstest_force_connector(drm_fd, connector,
> + FORCE_CONNECTOR_UNSPECIFIED);
> +
> + kmstest_force_edid(drm_fd, connector, NULL, 0);
> +
> + drmModeFreeConnector(connector);
> + }
> +}
> +
> +static int opt_handler(int opt, int opt_index, void *data)
> +{
> + switch (opt) {
> + case 'r':
> + reset_connectors();
> + exit(0);
> + break;
> + }
> +
> + return 0;
> +}
> +
> +int main(int argc, char **argv)
> +{
> + /* force the VGA output and test that it worked */
> + int drm_fd = 0;
> + drmModeRes *res;
> + drmModeConnector *vga_connector = NULL, *temp;
> + int start_n_modes, start_connection;
> + struct option long_opts[] = {
> + {"reset", 0, 0, 'r'},
> + {0, 0, 0, 0}
> + };
> + const char *help_str =
> + " --reset\t\tReset all connector force states and edid.\n";
> +
> + igt_subtest_init_parse_opts(&argc, argv, "", long_opts, help_str,
> + opt_handler, NULL);
> +
> + igt_fixture {
> + drm_fd = drm_open_driver_master(DRIVER_INTEL);
> + res = drmModeGetResources(drm_fd);
> +
> + /* find the vga connector */
> + for (int i = 0; i < res->count_connectors; i++) {
> +
> + vga_connector = drmModeGetConnectorCurrent(drm_fd,
> + res->connectors[i]);
> +
> + if (vga_connector->connector_type == DRM_MODE_CONNECTOR_VGA) {
> + start_n_modes = vga_connector->count_modes;
> + start_connection = vga_connector->connection;
> + break;
> + }
> +
> + drmModeFreeConnector(vga_connector);
> +
> + vga_connector = NULL;
> + }
> +
> + igt_require(vga_connector);
> + igt_skip_on(vga_connector->connection == DRM_MODE_CONNECTED);
> + }
> +
> + igt_subtest("force-connector-state") {
> + igt_display_t display;
> +
> + /* force the connector on and check the reported values */
> + kmstest_force_connector(drm_fd, vga_connector, FORCE_CONNECTOR_ON);
> + temp = drmModeGetConnectorCurrent(drm_fd,
> + vga_connector->connector_id);
> + igt_assert_eq(temp->connection, DRM_MODE_CONNECTED);
> + igt_assert_lt(0, temp->count_modes);
> + drmModeFreeConnector(temp);
> +
> + /* attempt to use the display */
> + kmstest_set_vt_graphics_mode();
> + igt_display_init(&display, drm_fd);
> + igt_display_commit(&display);
> + igt_display_fini(&display);
> +
> +
> + /* force the connector off */
> + kmstest_force_connector(drm_fd, vga_connector,
> + FORCE_CONNECTOR_OFF);
> + temp = drmModeGetConnectorCurrent(drm_fd,
> + vga_connector->connector_id);
> + igt_assert_eq(temp->connection, DRM_MODE_DISCONNECTED);
> + igt_assert_eq(0, temp->count_modes);
> + drmModeFreeConnector(temp);
> +
> + /* check that the previous state is restored */
> + kmstest_force_connector(drm_fd, vga_connector,
> + FORCE_CONNECTOR_UNSPECIFIED);
> + temp = drmModeGetConnectorCurrent(drm_fd,
> + vga_connector->connector_id);
> + igt_assert_eq(temp->connection, start_connection);
> + drmModeFreeConnector(temp);
> + }
> +
> + igt_subtest("force-edid") {
> + kmstest_force_connector(drm_fd, vga_connector,
> + FORCE_CONNECTOR_ON);
> + temp = drmModeGetConnectorCurrent(drm_fd,
> + vga_connector->connector_id);
> + drmModeFreeConnector(temp);
> +
> + /* test edid forcing */
> + kmstest_force_edid(drm_fd, vga_connector,
> + igt_kms_get_base_edid(), EDID_LENGTH);
> + temp = drmModeGetConnectorCurrent(drm_fd,
> + vga_connector->connector_id);
> +
> + igt_debug("num_conn %i\n", temp->count_modes);
> +
> + CHECK_MODE(temp->modes[0], 1920, 1080, 60);
> + /* Don't check non-preferred modes to avoid to tight coupling
> + * with the in-kernel EDID parser. */
> +
> + drmModeFreeConnector(temp);
> +
> + /* remove edid */
> + kmstest_force_edid(drm_fd, vga_connector, NULL, 0);
> + kmstest_force_connector(drm_fd, vga_connector,
> + FORCE_CONNECTOR_UNSPECIFIED);
> + temp = drmModeGetConnectorCurrent(drm_fd,
> + vga_connector->connector_id);
> + /* the connector should now have the same number of modes that
> + * it started with */
> + igt_assert_eq(temp->count_modes, start_n_modes);
> + drmModeFreeConnector(temp);
> +
> + }
> +
> + igt_fixture {
> + drmModeFreeConnector(vga_connector);
> + close(drm_fd);
> +
> + reset_connectors();
> + }
> +
> + igt_exit();
> +}
> --
> 2.1.0
>
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
More information about the Intel-gfx
mailing list