[Intel-gfx] [PATCH 08/10] drm/i915: Refactor LPT-H VGA dotclock disabling
Paulo Zanoni
przanoni at gmail.com
Wed Dec 2 08:56:01 PST 2015
2015-12-01 11:08 GMT-02:00 <ville.syrjala at linux.intel.com>:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Extract the LPT-H VGA dotclock disable to a separate function in
> anticipation of further use.
>
> While at it move the sb_lock locking inwards when enabling the VGA
> dotclock, as it's only needed to protect the sideband accesses.
>
> Also toss out the PIXCLK_GATE_GATE nop define and just use 0.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 1 -
> drivers/gpu/drm/i915/intel_display.c | 34 ++++++++++++++++++++--------------
> 2 files changed, 20 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index fcc819f400a6..3a9819735833 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7342,7 +7342,6 @@ enum skl_disp_power_wells {
> /* LPT PIXCLK_GATE */
> #define PIXCLK_GATE _MMIO(0xC6020)
> #define PIXCLK_GATE_UNGATE (1<<0)
> -#define PIXCLK_GATE_GATE (0<<0)
I actually liked the #define...
Reviewed-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
>
> /* SPLL */
> #define SPLL_CTL _MMIO(0x46020)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 1dc125b6dcdc..322a35c67870 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3938,6 +3938,21 @@ static int intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
> return 0;
> }
>
> +static void lpt_disable_iclkip(struct drm_i915_private *dev_priv)
> +{
> + u32 temp;
> +
> + I915_WRITE(PIXCLK_GATE, 0);
> +
> + mutex_lock(&dev_priv->sb_lock);
> +
> + temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
> + temp |= SBI_SSCCTL_DISABLE;
> + intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
> +
> + mutex_unlock(&dev_priv->sb_lock);
> +}
> +
> /* Program iCLKIP clock to the desired frequency */
> static void lpt_program_iclkip(struct drm_crtc *crtc)
> {
> @@ -3947,18 +3962,7 @@ static void lpt_program_iclkip(struct drm_crtc *crtc)
> u32 divsel, phaseinc, auxdiv, phasedir = 0;
> u32 temp;
>
> - mutex_lock(&dev_priv->sb_lock);
> -
> - /* It is necessary to ungate the pixclk gate prior to programming
> - * the divisors, and gate it back when it is done.
> - */
> - I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
> -
> - /* Disable SSCCTL */
> - intel_sbi_write(dev_priv, SBI_SSCCTL6,
> - intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK) |
> - SBI_SSCCTL_DISABLE,
> - SBI_ICLK);
> + lpt_disable_iclkip(dev_priv);
>
> /* 20MHz is a corner case which is out of range for the 7-bit divisor */
> if (clock == 20000) {
> @@ -3998,6 +4002,8 @@ static void lpt_program_iclkip(struct drm_crtc *crtc)
> phasedir,
> phaseinc);
>
> + mutex_lock(&dev_priv->sb_lock);
> +
> /* Program SSCDIVINTPHASE6 */
> temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
> temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
> @@ -4019,12 +4025,12 @@ static void lpt_program_iclkip(struct drm_crtc *crtc)
> temp &= ~SBI_SSCCTL_DISABLE;
> intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
>
> + mutex_unlock(&dev_priv->sb_lock);
> +
> /* Wait for initialization time */
> udelay(24);
>
> I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
> -
> - mutex_unlock(&dev_priv->sb_lock);
> }
>
> static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
> --
> 2.4.10
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Paulo Zanoni
More information about the Intel-gfx
mailing list