[Intel-gfx] [PATCH v3 2/4] drm/i915: Add reverse mapping between port and intel_encoder

Takashi Iwai tiwai at suse.de
Tue Dec 8 09:42:09 PST 2015


On Mon, 07 Dec 2015 10:41:51 +0100,
Takashi Iwai wrote:
> 
> On Mon, 07 Dec 2015 09:44:45 +0100,
> Daniel Vetter wrote:
> > 
> > On Fri, Dec 04, 2015 at 06:12:47PM +0100, Takashi Iwai wrote:
> > > This patch adds a reverse mapping from a digital port number to
> > > intel_encoder object containing the corresponding intel_digital_port.
> > > It simplifies the query of the encoder a lot.
> > > 
> > > Signed-off-by: Takashi Iwai <tiwai at suse.de>
> > > ---
> > > v2->v3:
> > > * Squashed previously two cleanup patches to a single patch
> > > 
> > >  drivers/gpu/drm/i915/i915_drv.h    |  2 ++
> > >  drivers/gpu/drm/i915/intel_audio.c | 39 +++++++++++---------------------------
> > >  drivers/gpu/drm/i915/intel_ddi.c   |  1 +
> > >  drivers/gpu/drm/i915/intel_dp.c    |  1 +
> > >  drivers/gpu/drm/i915/intel_hdmi.c  |  2 ++
> > >  5 files changed, 17 insertions(+), 28 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > > index 15c6dc0b4f37..9dbc143cac27 100644
> > > --- a/drivers/gpu/drm/i915/i915_drv.h
> > > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > > @@ -1944,6 +1944,8 @@ struct drm_i915_private {
> > >  	/* perform PHY state sanity checks? */
> > >  	bool chv_phy_assert[2];
> > >  
> > > +	struct intel_encoder *dig_port_map[I915_MAX_PORTS];
> > > +
> > >  	/*
> > >  	 * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
> > >  	 * will be rejected. Instead look for a better place.
> > > diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> > > index eeac9f763110..05f08b445dd6 100644
> > > --- a/drivers/gpu/drm/i915/intel_audio.c
> > > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > > @@ -636,13 +636,11 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
> > >  						int port, int rate)
> > >  {
> > >  	struct drm_i915_private *dev_priv = dev_to_i915(dev);
> > > -	struct drm_device *drm_dev = dev_priv->dev;
> > >  	struct intel_encoder *intel_encoder;
> > > -	struct intel_digital_port *intel_dig_port;
> > >  	struct intel_crtc *crtc;
> > >  	struct drm_display_mode *mode;
> > >  	struct i915_audio_component *acomp = dev_priv->audio_component;
> > > -	enum pipe pipe = -1;
> > > +	enum pipe pipe = INVALID_PIPE;
> > >  	u32 tmp;
> > >  	int n;
> > >  
> > > @@ -655,21 +653,12 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
> > >  
> > >  	mutex_lock(&dev_priv->av_mutex);
> > >  	/* 1. get the pipe */
> > > -	for_each_intel_encoder(drm_dev, intel_encoder) {
> > > -		if (intel_encoder->type != INTEL_OUTPUT_HDMI)
> > > -			continue;
> > > -		intel_dig_port = enc_to_dig_port(&intel_encoder->base);
> > > -		if (port == intel_dig_port->port) {
> > > -			crtc = to_intel_crtc(intel_encoder->base.crtc);
> > > -			if (!crtc) {
> > > -				DRM_DEBUG_KMS("%s: crtc is NULL\n", __func__);
> > > -				continue;
> > > -			}
> > > -			pipe = crtc->pipe;
> > > -			break;
> > > -		}
> > > +	intel_encoder = dev_priv->dig_port_map[port];
> > > +	if (intel_encoder && intel_encoder->type == INTEL_OUTPUT_HDMI &&
> > 
> > Is it really legit to call these functions with a port for which we don't
> > have an encoder? WARN_ON(!encoder) here and in the other places?
> 
> Currently there are little checks in the caller side.  So I guess only
> a few of them deserve WARN_ON().  The empty encoder and empty crtc
> would be good with WARN_ON(), as the port is supposed to be real. 
> The HDMI check may be silent as is.
> 
> > Or would
> > that require some function for snd-hda to inquire i915 which ports are
> > enabled (which we probably should have to avoid registering audio ports
> > that aren't there)?
> > 
> > Otherwise lgtm.
> 
> OK, I'll add WARN_ON() to them.

It turned out that the encoder might be NULL for MST, as currently
it's not set properly yet.  So WARN_ON() will splat too much
unnecessarily.

Though, I rewrote a bit about the check and give a bit more messages.
Below is the revised patch.  So far, I have only this change, so I
hesitate to resubmit the whole patchset.  If a full patchset is
still preferred, let me know.


thanks,

Takashi

-- 8< --
From: Takashi Iwai <tiwai at suse.de>
Subject: [PATCH v4] drm/i915: Add reverse mapping between port and intel_encoder

This patch adds a reverse mapping from a digital port number to
intel_encoder object containing the corresponding intel_digital_port.
It simplifies the query of the encoder a lot.

Signed-off-by: Takashi Iwai <tiwai at suse.de>
---
v3->v4: add a bit more verbose check for NULL encoder, etc.

 drivers/gpu/drm/i915/i915_drv.h    |  2 ++
 drivers/gpu/drm/i915/intel_audio.c | 57 +++++++++++++++-----------------------
 drivers/gpu/drm/i915/intel_ddi.c   |  1 +
 drivers/gpu/drm/i915/intel_dp.c    |  1 +
 drivers/gpu/drm/i915/intel_hdmi.c  |  2 ++
 5 files changed, 28 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 15c6dc0b4f37..9dbc143cac27 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1944,6 +1944,8 @@ struct drm_i915_private {
 	/* perform PHY state sanity checks? */
 	bool chv_phy_assert[2];
 
+	struct intel_encoder *dig_port_map[I915_MAX_PORTS];
+
 	/*
 	 * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
 	 * will be rejected. Instead look for a better place.
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index eeac9f763110..6380b2400448 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -636,15 +636,14 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
 						int port, int rate)
 {
 	struct drm_i915_private *dev_priv = dev_to_i915(dev);
-	struct drm_device *drm_dev = dev_priv->dev;
 	struct intel_encoder *intel_encoder;
-	struct intel_digital_port *intel_dig_port;
 	struct intel_crtc *crtc;
 	struct drm_display_mode *mode;
 	struct i915_audio_component *acomp = dev_priv->audio_component;
-	enum pipe pipe = -1;
+	enum pipe pipe = INVALID_PIPE;
 	u32 tmp;
 	int n;
+	int err = 0;
 
 	/* HSW, BDW, SKL, KBL need this fix */
 	if (!IS_SKYLAKE(dev_priv) &&
@@ -655,26 +654,21 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
 
 	mutex_lock(&dev_priv->av_mutex);
 	/* 1. get the pipe */
-	for_each_intel_encoder(drm_dev, intel_encoder) {
-		if (intel_encoder->type != INTEL_OUTPUT_HDMI)
-			continue;
-		intel_dig_port = enc_to_dig_port(&intel_encoder->base);
-		if (port == intel_dig_port->port) {
-			crtc = to_intel_crtc(intel_encoder->base.crtc);
-			if (!crtc) {
-				DRM_DEBUG_KMS("%s: crtc is NULL\n", __func__);
-				continue;
-			}
-			pipe = crtc->pipe;
-			break;
-		}
+	intel_encoder = dev_priv->dig_port_map[port];
+	if (!intel_encoder || !intel_encoder->base.crtc ||
+	    intel_encoder->type != INTEL_OUTPUT_HDMI) {
+		DRM_DEBUG_KMS("no valid port %c\n", port_name(port));
+		err = -ENODEV;
+		goto unlock;
 	}
-
+	crtc = to_intel_crtc(intel_encoder->base.crtc);
+	pipe = crtc->pipe;
 	if (pipe == INVALID_PIPE) {
 		DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port));
-		mutex_unlock(&dev_priv->av_mutex);
-		return -ENODEV;
+		err = -ENODEV;
+		goto unlock;
 	}
+
 	DRM_DEBUG_KMS("pipe %c connects port %c\n",
 				  pipe_name(pipe), port_name(port));
 	mode = &crtc->config->base.adjusted_mode;
@@ -687,8 +681,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
 		tmp = I915_READ(HSW_AUD_CFG(pipe));
 		tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
 		I915_WRITE(HSW_AUD_CFG(pipe), tmp);
-		mutex_unlock(&dev_priv->av_mutex);
-		return 0;
+		goto unlock;
 	}
 
 	n = audio_config_get_n(mode, rate);
@@ -698,8 +691,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
 		tmp = I915_READ(HSW_AUD_CFG(pipe));
 		tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
 		I915_WRITE(HSW_AUD_CFG(pipe), tmp);
-		mutex_unlock(&dev_priv->av_mutex);
-		return 0;
+		goto unlock;
 	}
 
 	/* 3. set the N/CTS/M */
@@ -707,8 +699,9 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
 	tmp = audio_config_setup_n_reg(n, tmp);
 	I915_WRITE(HSW_AUD_CFG(pipe), tmp);
 
+ unlock:
 	mutex_unlock(&dev_priv->av_mutex);
-	return 0;
+	return err;
 }
 
 static int i915_audio_component_get_eld(struct device *dev, int port,
@@ -716,27 +709,21 @@ static int i915_audio_component_get_eld(struct device *dev, int port,
 					unsigned char *buf, int max_bytes)
 {
 	struct drm_i915_private *dev_priv = dev_to_i915(dev);
-	struct drm_device *drm_dev = dev_priv->dev;
 	struct intel_encoder *intel_encoder;
 	struct intel_digital_port *intel_dig_port;
 	const u8 *eld;
 	int ret = -EINVAL;
 
 	mutex_lock(&dev_priv->av_mutex);
-	for_each_intel_encoder(drm_dev, intel_encoder) {
-		if (intel_encoder->type != INTEL_OUTPUT_DISPLAYPORT &&
-		    intel_encoder->type != INTEL_OUTPUT_HDMI)
-			continue;
+	intel_encoder = dev_priv->dig_port_map[port];
+	if (intel_encoder) {
+		ret = 0;
 		intel_dig_port = enc_to_dig_port(&intel_encoder->base);
-		if (port == intel_dig_port->port) {
-			ret = 0;
-			*enabled = intel_dig_port->audio_connector != NULL;
-			if (!*enabled)
-				break;
+		*enabled = intel_dig_port->audio_connector != NULL;
+		if (*enabled) {
 			eld = intel_dig_port->audio_connector->eld;
 			ret = drm_eld_size(eld);
 			memcpy(buf, eld, min(max_bytes, ret));
-			break;
 		}
 	}
 
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 76ce7c2960b6..59deb0d85533 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -3295,6 +3295,7 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
 	intel_encoder->get_config = intel_ddi_get_config;
 
 	intel_dig_port->port = port;
+	dev_priv->dig_port_map[port] = intel_encoder;
 	intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
 					  (DDI_BUF_PORT_REVERSAL |
 					   DDI_A_4_LANES);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index e1ceff7ab265..e1456ead5c53 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -6003,6 +6003,7 @@ intel_dp_init(struct drm_device *dev,
 	}
 
 	intel_dig_port->port = port;
+	dev_priv->dig_port_map[port] = intel_encoder;
 	intel_dig_port->dp.output_reg = output_reg;
 
 	intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index bdd462e7c690..c046017be786 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -2148,6 +2148,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 void intel_hdmi_init(struct drm_device *dev,
 		     i915_reg_t hdmi_reg, enum port port)
 {
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_digital_port *intel_dig_port;
 	struct intel_encoder *intel_encoder;
 	struct intel_connector *intel_connector;
@@ -2216,6 +2217,7 @@ void intel_hdmi_init(struct drm_device *dev,
 		intel_encoder->cloneable |= 1 << INTEL_OUTPUT_HDMI;
 
 	intel_dig_port->port = port;
+	dev_priv->dig_port_map[port] = intel_encoder;
 	intel_dig_port->hdmi.hdmi_reg = hdmi_reg;
 	intel_dig_port->dp.output_reg = INVALID_MMIO_REG;
 
-- 
2.6.3



More information about the Intel-gfx mailing list